Curt Group Retrac 207800 Manuel utilisateur

RETRACMIRRORS.COM •NEED ASSISTANCE? •877.287.8 634 •207800-INS-RA •PAGE 1

Brackets and Hardware

INSTALLATION MANUAL 207800

Parts List

1Milestone™bumper guard

1Driver / left mounting bracket

1Passenger / right mounting bracket

2Tow hook mounting bar

2Mounting bracket spacer

2Adjustable mounting bracket

12 Hex bolt, M16

8Nylock nut, M16

18 Flat washer, M16

4Lock washer, M16

Tools Required

Ratchet Torque wrench,

24mm

Socket, 24mm --

Maintenance

To protect the product, wax after installing. Regular waxing is recommended

to add a protective layer over the finish. Do not use any type of polish or wax

that may contain abrasives that could damage the finish.

For polished, gloss and other smooth finishes,

polish may be used to clear small scratches and scuffs on the finish.

Mild automotive detergent may be used to clean the product. Do not use dish detergent, abrasive

cleaners, abrasive pads, wire brushes or other similar products that may damage the ﬁnish.

Product Photo

Passenger / right

mounting bracket

Driver / left

mounting bracket

Level of Difﬁculty

Easy

NOTICE

Before you begin installation, read all instructions thoroughly.

Proper tools will improve the quality of installation and reduce the time required.

To help prevent damage to the product or vehicle, refer to the specified

torque specifications when securing hardware during the installation process.

Product Registration and Warranty

CURT Group stands behind our products with industry-leading warranties.

Provide feedback and help us to improve our products by registering your purchase at:

warranty.curtgroup.com/surveys

Torque Speciﬁcations

Metric

M6 bolt 8 ft-lbs.

M8 bolt 19 ft-lbs.

M10 bolt 37 ft-lbs.

M12 bolt 65 ft-lbs.

M16 bolt 160 ft-lbs.

Use above torque setting unless otherwise noted

RETRACMIRRORS.COM •NEED ASSISTANCE? •877.287.8 634 •207800-INS-RA •PAGE 2

Parts List

Item Qty Description

1 1 Bumper guard

2 1 Driver / left mounting bracket

3 1 Passenger / right

mounting bracket

4 2 Tow hook mounting bar

5 2 Mounting bracket spacer

6 2 Adjustable mounting bracket

712 Hex bolt, M16

8 8 Nylock nut, M16

918 Flat washer, M16

10 4Lock washer, M16

RETRACMIRRORS.COM •NEED ASSISTANCE? •877.287.8 634 •207800-INS-RA •PAGE 3

Step 1

Insert the tow hook mounting bar into the

tow hook opening. Secure with a mounting

bracket spacer, M16 lock washer and bolt.

Step 4

Install the guard onto the adjustable

mounting brackets with M16 bolts,

flat washers and nylock nuts.

Step 2

Slide a mounting bracket over each

tow hook mounting bar and secure with

an M16 bolt, lock washer and flat washer

into the tow hook mounting bar.

Snug the hardware,

but do not fully tighten.

Step 3

Secure an adjustable mounting bracket

to each mounting bracket using M16 bolts,

flat washers and nylock nuts.

Snug the hardware,

but do not fully tighten.

RETRACMIRRORS.COM •NEED ASSISTANCE? •877.287.8 634 •207800-INS-RA •PAGE 4

Step 5

Tighten all M16 hardware to the

recommended torque specifications

listed in the table on page one.

Keep the mounting brackets

parallel when tightening.

Step 6

Adjust the guard as needed to center on

the truck while tightening the remaining bolts.

Note: Recommended guard location is to be as close to

the truck as the brackets allow and as high up as brackets

allow without contacting the hood when open.

Step 7

Congratulations on the installation of your

new RETRAC Milestone™bumper guard.

With the bumper guard installed, periodic

inspections should be performed to ensure

all mounting hardware remains tight.

To protect your investment, see the

'Notes and Maintenance' section on

the first page of this installation manual.

Representative photo,

actual ﬁnish may vary

Autres manuels Curt Group Accessoires automobiles

Curt Group

Curt Group Retrac 206820 Manuel utilisateur

Curt Group

Curt Group ARIES S224046 Manuel utilisateur

Curt Group

Curt Group 18113 Manuel utilisateur

Curt Group

Curt Group Aries S225045-2 Manuel utilisateur

Curt Group

Curt Group Aries AL235045 Manuel utilisateur

Curt Group

Curt Group 58975 Manuel utilisateur

Curt Group

Curt Group 51189 Manuel utilisateur

Curt Group

Curt Group Aries 2055115 Manuel utilisateur

Curt Group

Curt Group 70105 Manuel utilisateur

Curt Group

Curt Group 13387 Manuel utilisateur

Curt Group

Curt Group ARIES AL234046 Manuel utilisateur

Curt Group

Curt Group TruTrack 17500 Manuel utilisateur

Curt Group

Curt Group 18320 Manuel utilisateur

Curt Group

Curt Group UWS TBV-49 Manuel utilisateur

Curt Group

Curt Group 60638 Manuel utilisateur

Curt Group

Curt Group Liverne 401801 Manuel utilisateur

Curt Group

Curt Group 45143 Manuel utilisateur

Curt Group

Curt Group 45144 Manuel utilisateur

Curt Group

Curt Group 60639 Manuel utilisateur

Curt Group

Curt Group Retrac 207700 Manuel utilisateur

Curt Group

Curt Group 40247 Manuel utilisateur

Curt Group

Curt Group Aries 2074113 Manuel utilisateur

Curt Group

Curt Group Aries S224046-2 Manuel utilisateur

Curt Group

Curt Group 13458 Manuel utilisateur

Manuels Accessoires automobiles populaires d'autres marques

James Baroud

James Baroud Odyssey Manuel utilisateur

Motorola

Motorola i50sx Manuel utilisateur

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manuel utilisateur

Feniex

Feniex T3 Manuel utilisateur

Renault

Renault 77 11 423 180 Manuel utilisateur

Kia

Kia E8300-4D000 Manuel utilisateur

Brink

Brink 756843 Manuel utilisateur

Whispbar

Whispbar K085W Manuel utilisateur

v.link

v.link CI-VL2-PC-HSD Manuel utilisateur

Viking

Viking Stack-Rack Guide de configuration rapide

Aries

Aries 203015 Manuel utilisateur

Choetech

Choetech AT0005 Manuel utilisateur

ZZ2

ZZ2 ZZAIR-PRO Manuel utilisateur

Holman

Holman 4A80L Manuel utilisateur

Thule

Thule 2075 Manuel utilisateur

Motorola

Motorola T325 Manuel utilisateur

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guide d'installation

DV8

DV8 FBJL-02 Manuel utilisateur