Curt Group 18320 Manuel utilisateur

CURTMFG.COM •NEED ASSISTANCE? •8 7 7. 2 8 7. 8 6 3 4 •18320-INS-RA •PAGE 1

Brackets and Hardware

INSTALLATION MANUAL 18320

Level of Difﬁculty

Easy

Product Photo

Parts List

Qty Description #

2Kayak holder 1

2Tie-down strap 2

4Carriage bolt 3

4Flat washer 4

4Hand wheel 5

2Bracket 6

Notes and Maintenance

Before you begin installation, read all instructions thoroughly.

Proper tools will improve the quality of installation and reduce the time required.

Mild automotive detergent may be used to clean the product. Do not use dish detergent, abrasive

cleaners, abrasive pads, wire brushes or other similar products that may damage the ﬁnish.

Make sure the kayak holders are secured before every trip.

The kayak holders must be periodically inspected for signs of wear, corrosion and fatigue.

Check at each stop to ensure the load is secure.

Remove your kayak holders when not in use and before entering automatic car washes.

Do not use the kayak holders for purposes other than those for which they were designed.

Check local and state laws governing projection of objects beyond the perimeter of a vehicle.

Be aware of the width and height of your cargo in low clearance areas.

Do not exceed 80 mph (130 km/h).

Do not attempt to modify the cross bars or any of the system components.

Weight Capacities

Holder capacity 75 lbs. 34 kg

Holder weight 7.5 lbs. 3.4 kg

Product Registration

CURT Group stands behind our products

with industry leading warranties. You can

help us continue to improve our product

line and help us understand your needs

by registering your purchase by visiting:

warranty.curtgroup.com/surveys

At CURT Group, customer is king.

We value your feedback and we use

that information to make improvements

on our products. Please, take a minute

and let us know how we are doing.

CURTMFG.COM •NEED ASSISTANCE? •8 7 7. 2 8 7. 8 6 3 4 •18320-INS-RA •PAGE 2

Step 1

Rotate the locking handle 90° to

the right or left to release the lock.

Rotate the backrest to the desired

position. To lock, return the locking handle

to be parallel with the backrest, as shown.

CAUTION: Pinch hazard.

Place the kayak holder (#1) onto the vehicle

cross bar in the desired position. Insert two

carriage bolts (#3) through the kayak holder

frame, as shown.

Slide the mounting bracket (#6) onto

the bolts, followed by a flat washer (#4)

on each bolt. Tighten firmly with the

provided hand wheels (#5).

Note: Do not overtighten to prevent

damage to your kayak and / or kayak holders.

Repeat this step for other kayak holder.

Step 2

Position the vehicle cross bars appropriately

to fit the kayak being transported, maintaining

a minimum spacing of 23-5/8".

Place a tie-down strap buckle (#2)

on the outer side of the kayak. Pass

the other end of the strap over and

through the kayak holder backrest and

over the kayak, passing beneath the buckle.

Continue passing the strap downward through

the kayak holder frame, around the vehicle

crossbar and then upward through the kayak

holder frame, as shown. Pass the strap

through the slot in the leather pad.

While pressing the buckle handle open, pass

the strap through the buckle from the bottom

side. Release the buckle handle and pull the

strap to be snug. Tie the loose end of the strap

to the kayak holder frame or vehicle crossbar.

When not in use, remove the tie-down straps

and fold the backrest down by rotating the

locking handle 90° to the right or left to release

the lock. Rotate the backrest to the desired

position. To lock, return the locking handle to

be parallel with the frame, as shown.

CAUTION: Pinch hazard.

Autres manuels Curt Group Accessoires automobiles

Curt Group

Curt Group Aries AL235045 Manuel utilisateur

Curt Group

Curt Group Q16 Manuel utilisateur

Curt Group

Curt Group Liverne 401801 Manuel utilisateur

Curt Group

Curt Group 3025121 Manuel utilisateur

Curt Group

Curt Group 70105 Manuel utilisateur

Curt Group

Curt Group Aries S224046-2 Manuel utilisateur

Curt Group

Curt Group Aries 3025175 Manuel utilisateur

Curt Group

Curt Group ARIES S225045 Manuel utilisateur

Curt Group

Curt Group Betterweigh Manuel utilisateur

Curt Group

Curt Group 40247 Manuel utilisateur

Curt Group

Curt Group Aries TrailCrusher 2156002 Manuel utilisateur

Curt Group

Curt Group 3025101 Manuel utilisateur

Curt Group

Curt Group 60628 Manuel utilisateur

Curt Group

Curt Group 60639 Manuel utilisateur

Curt Group

Curt Group 18113 Manuel utilisateur

Curt Group

Curt Group 13387 Manuel utilisateur

Curt Group

Curt Group TruTrack 17500 Manuel utilisateur

Curt Group

Curt Group Aries 2074113 Manuel utilisateur

Curt Group

Curt Group 13458 Manuel utilisateur

Curt Group

Curt Group ARIES AL234046 Manuel utilisateur

Curt Group

Curt Group Aries S225045-2 Manuel utilisateur

Curt Group

Curt Group Retrac 207800 Manuel utilisateur

Curt Group

Curt Group 11392 Manuel utilisateur

Curt Group

Curt Group UWS TBV-49 Manuel utilisateur

Manuels Accessoires automobiles populaires d'autres marques

James Baroud

James Baroud Odyssey Manuel utilisateur

Motorola

Motorola i50sx Manuel utilisateur

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manuel utilisateur

Feniex

Feniex T3 Manuel utilisateur

Renault

Renault 77 11 423 180 Manuel utilisateur

Kia

Kia E8300-4D000 Manuel utilisateur

Brink

Brink 756843 Manuel utilisateur

Whispbar

Whispbar K085W Manuel utilisateur

v.link

v.link CI-VL2-PC-HSD Manuel utilisateur

Viking

Viking Stack-Rack Guide de configuration rapide

Aries

Aries 203015 Manuel utilisateur

Choetech

Choetech AT0005 Manuel utilisateur

ZZ2

ZZ2 ZZAIR-PRO Manuel utilisateur

Holman

Holman 4A80L Manuel utilisateur

Thule

Thule 2075 Manuel utilisateur

Motorola

Motorola T325 Manuel utilisateur

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guide d'installation

DV8

DV8 FBJL-02 Manuel utilisateur