Curt Group 48411 Manuel utilisateur

CURTMFG.COM •NEED ASSISTANCE? •877.287.8 634 •48411-INS-RA •PAGE 1

INSTALLATION MANUAL 48411

Product Photo

Level of Difﬁculty

Easy

WARNING

Never exceed the vehicle manufacturer's recommended towing capacity.

Do not modify this pintle in any way. Unauthorized modification may impair the

function and / or safety and could affect the life of the product and void the warranty.

Maintain adequate vertical down (tongue) load to have control of the

trailer (generally 10%), but do not exceed the specified rated capacities.

Trailers and equipment are designed for on-road towing within the stated capacities.

For off-road applications, reduce the capacities listed in the specifications table by 25%.

Keep safety chains in place and in working order. Never operate

the product without the safety chains attached to vehicle.

CAUTION

Check for damaged parts before each use. Carefully check that the product will operate

properly and perform its intended function. Replace damaged or worn parts immediately.

Never operate the product with a damaged part.

NOTICE

Before you begin installation, read all instructions thoroughly.

Proper tools will improve the quality of installation and reduce the time required.

To help prevent damage to the product or vehicle, refer to the specified

torque specifications when securing hardware during the installation process.

Maintenance

Inspect the unit for proper operation, and worn, damaged or missing parts.

Replace as required or when the unit's wear exceeds 1/8" from the original surface.

Check the hardware torque speciﬁcation after the ﬁrst

200 miles of towing and every 400 miles after that.

Parts List

Item Qty Description

1 1 Pintle hitch

Pintle Weight Capacity

Gross trailer weight (GTW) 20,000 lbs.

Ball Weight Capacity

Gross trailer weight (GTW) 10,000 lbs.

Tools Required

Torque wrench Ratchet

Socket, 3/4" Wrench, 3/4"

Product Registration

CURT Group stands behind our products

with industry-leading warranties. Provide

feedback and help us to improve our

products by registering your purchase at:

warranty.curtgroup.com/surveys

Torque Speciﬁcations

Hitch ball 450 ft-lbs.

1/2" bolt 90 ft-lbs.

Use above torque setting unless otherwise noted

CURTMFG.COM •NEED ASSISTANCE? •877.287.8 634 •48411-INS-RA •PAGE 2

Hooking up to the Trailer

Unlock the pintle by removing the safety pin.

Back the vehicle up until the lunette

eye taps the pintle's strike plate.

Lower the lunette eye into place. The primary

latching mechanism will engage automatically.

Secure with provided safety pin.

Cross the safety chains and hook them up

to the vehicle. Link the safety chains onto

the chain hangers to prevent them from

dragging on the ground during travel.

NOTICE

Hooks are not to be used as a

connection point for safety chains.

They are to be used only as chain support.

Unhooking the Trailer

Unhook the safety chains from the

hangers and vehicle and unlock the

pintle by removing the safety pin.

Flip the locking plate forward until it

touches the trailer ball. Raise the lunette

eye until it clears the trailer ball.

Return the safety pin to locked position.

Mounting the Pintle Hook (pintle mount required, sold separately)

Insert the pintle mount shank into

the receiver hitch. Secure with a

5/8" hitch pin or lock (not included).

Begin securing the pintle hook to the pintle

mount using four 1/2" grade-8 bolts, washers

and nuts (not included). Do not fully tighten.

Adjust the pintle hook to the required towing

height. Tighten all bolts to 90 ft. lbs.

Note: Never exceed the rated capacity of

the vehicle or lowest rated towing component.

BEFORE EACH USE: Inspect the unit for proper

operation and worn, damaged or missing parts.

Replace parts as required or when the unit's

wear exceeds 1/8" from the original surface.

Autres manuels Curt Group Accessoires automobiles

Curt Group

Curt Group 18151 Manuel utilisateur

Curt Group

Curt Group 40247 Manuel utilisateur

Curt Group

Curt Group Aries TrailCrusher 2156002 Manuel utilisateur

Curt Group

Curt Group 19750 Manuel utilisateur

Curt Group

Curt Group 60639 Manuel utilisateur

Curt Group

Curt Group Retrac 207700 Manuel utilisateur

Curt Group

Curt Group 45144 Manuel utilisateur

Curt Group

Curt Group Aries 4490 Manuel utilisateur

Curt Group

Curt Group ARIES S224046 Manuel utilisateur

Curt Group

Curt Group 60628 Manuel utilisateur

Curt Group

Curt Group UWS TBV-49 Manuel utilisateur

Curt Group

Curt Group 16190 Manuel utilisateur

Curt Group

Curt Group 18320 Manuel utilisateur

Curt Group

Curt Group RETRAC 207770 Manuel utilisateur

Curt Group

Curt Group 13458 Manuel utilisateur

Curt Group

Curt Group 45143 Manuel utilisateur

Curt Group

Curt Group Liverne 401801 Manuel utilisateur

Curt Group

Curt Group Aries S225045-2 Manuel utilisateur

Curt Group

Curt Group 13387 Manuel utilisateur

Curt Group

Curt Group Aries 3025175 Manuel utilisateur

Curt Group

Curt Group 13415 Manuel utilisateur

Curt Group

Curt Group Betterweigh Manuel utilisateur

Curt Group

Curt Group 51189 Manuel utilisateur

Curt Group

Curt Group Aries AL235045 Manuel utilisateur

Manuels Accessoires automobiles populaires d'autres marques

James Baroud

James Baroud Odyssey Manuel utilisateur

Motorola

Motorola i50sx Manuel utilisateur

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manuel utilisateur

Feniex

Feniex T3 Manuel utilisateur

Renault

Renault 77 11 423 180 Manuel utilisateur

Kia

Kia E8300-4D000 Manuel utilisateur

Brink

Brink 756843 Manuel utilisateur

Whispbar

Whispbar K085W Manuel utilisateur

v.link

v.link CI-VL2-PC-HSD Manuel utilisateur

Viking

Viking Stack-Rack Guide de configuration rapide

Aries

Aries 203015 Manuel utilisateur

Choetech

Choetech AT0005 Manuel utilisateur

ZZ2

ZZ2 ZZAIR-PRO Manuel utilisateur

Holman

Holman 4A80L Manuel utilisateur

Thule

Thule 2075 Manuel utilisateur

Motorola

Motorola T325 Manuel utilisateur

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guide d'installation

DV8

DV8 FBJL-02 Manuel utilisateur