Currie tech e4.5 eZip Manuel utilisateur
2e4.5 Owner's Manual.indd, Last Modied: December 28, 2012 10:49 AM
Customer Service................................................................................3
Technical Information .........................................................................4
Scooter Components ..........................................................................5
Scooter Assembly ..........................................................................6-11
Tire ination.......................................................................................8
Quick release levers/clamps ......................................................10-11
Scooter Use........................................................................................12
Safety............................................................................................ 13-15
Battery Care ................................................................................. 16-19
Battery charging ..............................................................................19
Maintenance................................................................................. 20-23
Brake adjustment ...................................................................... 21-23
Troubleshooting .......................................................................... 24-25
Limited Warranty ......................................................................... 26-27
Additional Instructions and Warnings....................................... 28-29
CONTENTS
3
PLEASE DO NOT RETURN
THIS SCOOTER TO THE STORE.
For questions or assistance on assembly, contact
Currie Technologies® Customer Service toll free at
(800) 377-4532
Monday - Friday
8:00 am - 4:00 pm (PST)
Retain this manual along with the original sales receipt. Record the product serial number (S/N), place of purchase and date
of purchase below.
Model Name : __________________________________________
S/N : __________________________________________________
Place of Purchase : ______________________________________
Date of Purchase : _______________________________________
(Stamped on scooter frame, between front wheels)
4e4.5 Owner's Manual.indd, Last Modied: December 28, 2012 10:49 AM
Minimum Rider
Age 13 years old
Maximum Rider
Weight 180 lbs. (81.6 kg)
Maximum Speed* 12 mph (19 kph)
Maximum range* 5 miles (8 km)
Battery 24V 7Ah, SLA
Charging time** 4-6 hours
*Maximum range and speed varies based on rider weight and terrain
**Charge time is based on new batteries charged with a standard charger
TECHNICAL INFORMATION
Battery & controller compartments
(underneath deck)
5
SCOOTER COMPONENTS
Brake lever
“Top cap”
Steering mast
Throttle
Handlebar
Quick release
On/Off switch
Chain guard with
access door for
tire ination
Battery & controller compartments
(underneath deck)
Seat mast
Saddle
Charger port
(XLR-3 plug type)
Locking pin
6e4.5 Owner's Manual.indd, Last Modied: December 28, 2012 10:49 AM
ASSEMBLING YOUR E4.5
1. Slide the steering mast onto the scooter frame. Make sure the silver locking pin engages, then close the quick
release securely to hold the mast in place. See the next section of this manual for more information on properly
tightening quick release clamps.
1b
1a
Steering mast
Locking pin
7
2. Install the seat mast into the frame. The mast should go all the way down to the base of the scooter, as shown in
photo 2a. You may need to twist the mast to work it into position. With the mast fully inserted, twist the saddle so it is
facing forward, parallel to the scooter, then tighten the binder bolt as show in photo 2b. When the binder bolt is properly
tightened, the seat mast will not be able to twist out of position or pull out of the scooter.
2a 2b
3. Before riding for the rst time, you should check the tightness of all nuts and bolts on the scooter. Most important are
the front wheel axle nuts, any nuts or bolts around the rear brake, the motor, and the rear wheel. Make sure the brake
levers and throttle are secure on the handlebars. If they can be twisted out of alignment, their mounting bolts need to be
tightened.
8e4.5 Owner's Manual.indd, Last Modied: December 28, 2012 10:49 AM
Both the front and rear tires on the e4.5 are pneumatic, meaning they need to be kept inated at the proper air pressure to
work properly. Just like a car tire, the proper ination pressure is molded into the sidewall of the tire. Unlike a car, it is best
to inate your scooter’s tires with a hand pump (usually sold for inating bicycle tires), to avoid overlling.
To inate the front tire:
1. Remove the valve cap from the air valve.
2. Add air as needed, checking the pressure regularly to avoid overlling.
3. Reinstall the valve cap.
To inate the rear tire:
1. Move aside the door on the chainguard covering the valve. Align the tire valve with the hole in the chainguard, and
remove the valve cap.
2. Install the supplied valve extender.
3. Add air as needed, checking the pressure regularly to avoid overlling.
4. Remove the valve extender, reinstall the valve cap, and close the cover door.
9
Attention!
Before riding your scooter for the rst time, you must
connect the battery, located under the deck plate
1
2
3
10 e4.5 Owner's Manual.indd, Last Modied: December 28, 2012 10:49 AM
Properly adjusting the steering mast quick release clamp
On the E4.5, the steering mast is clamped in place by the force of the
quick release cam lever pushing against one side of the clamp and
pulling the tension adjusting nut, by way of the skewer, against the other.
The amount of clamping force is controlled by the tension adjusting nut.
Turning the tension adjusting nut clockwise while keeping the cam lever
from rotating increases clamping force; turning it counterclockwise while
keeping the cam lever from rotating reduces clamping force. Less than half
a turn of the tension adjusting nut can make the difference between safe
clamping force and unsafe clamping force.
1. With the quick release clamp in the OPEN position, position the
steering mast so that the handlebar is perpendicular to the front axle.
2. Swing the quick release lever into the CLOSED position.
3. While holding the front wheel in place, grab the handlebar with both
hands and attempt to rotate it out of alignment.
Tension adjusting
nut
Skewer
Cam lever
open
Closed
Autres manuels pour e4.5 eZip
1
Table des matières
Autres manuels Currie tech Scooter
Currie tech
Currie tech e4.5 eZip Manuel utilisateur
Currie tech
Currie tech EZ 3 NANO Manuel utilisateur
Currie tech
Currie tech Ezip Manuel utilisateur
Currie tech
Currie tech 500 DD Series Manuel utilisateur
Currie tech
Currie tech 300 Series Manuel utilisateur
Currie tech
Currie tech 500 DD Series Manuel utilisateur
Currie tech
Currie tech 600 Series Manuel utilisateur
Currie tech
Currie tech 350 Series Manuel utilisateur
Manuels Scooter populaires d'autres marques
First Choice Mobility
First Choice Mobility Roma Medical Corella S741 Manuel utilisateur
Carrera
Carrera impel Manuel utilisateur
Afikim
Afikim Superlight SL-3 Manuel utilisateur
CareCo
CareCo ZOOM Manuel utilisateur
Douglas
Douglas Vespa G.S. Manuel utilisateur
Gazelle
Gazelle with BOSCH System Manuel utilisateur