cubiio 2 Manuel utilisateur
MADE IN
TAIWAN
User Manual v1.3
Thank you for purchasing Cubiio2 . This manual will help you quickly understand
the functions and safety precautions of this product.
Please read carefully and follow the contents of this manual before starting to use
Cubiio2: The principle of laser processing is focusing the high-power laser on
surfaces of objects. After absorbing the laser, objects are instantly heated,
burned, or gasified to engrave or cut the object. During the process, harmful light,
temperature, and gases will be generated. It may cause fire, visual impairment,
skin burns, or inhalation of poisonous gas and other hazards.
The copyright in this manual, the hardware, firmware, and software in the product
described therein are owned by MUHERZ LIMITED. All rights reserved.
No part of this publication may be reproduced, stored in a retrieval system, or
transmitted, in any form or by any means, electronic, mechanical, photocopying or
otherwise, without the prior written permission of Muherz.
Please keep this manual for future reference.
We provide online support worldwide. If you have any questions:
01
01
02
04
04
04
05
06
06
07
07
08
09
10
10
10
11
11
11
12
13
13
13
14
15
16
Contents
About This Manual
02 Notices
01 Safety
3.1 Preparing Creative Space
Warnings & Signs
3.2 Unbox
3.3 Overview
03 Getting Started
3.4 Switch & Indicator Light Meanings
3.5 Setup
3.6 WPS Wi-Fi connection
3.7 Install the App
3.8 First Work
4.1 Cleaning
4.2 Maintenance
4.3 Changing Laser
04 Caring
5.1 Specification
5.2 Materials
5.3 Laser Safety
5.4 Engraving Oversize Objects
05 Reference
06 Warranty
Notices for Customers in the U.S.A.
Notices for Customers in Europe
Please make sure you have the latest version of the Cubiio2 user manual.
The latest version of the manual can be found at:
01
ContentsAbout This Manual
0-15y
To prevent injury to yourself or to others or damage to Cubiio2, read the following
safety precautions carefully. The owners of Cubiio2 are responsible for making
sure all those who use the product read and follow the instructions.
Set the machine in a room with good ventilation.
Avoid set it outdoor, direct sunlight, unventilated basement or top floor.
Set the machine on a stable and flat surface.
Tilting may trigger safety mechanisms and stop working.
Do not use in direct sunlight or wet surroundings.
Ensure temperature is in the range of 0-30℃and humidity is in the
range of 10-75% when operating.
Ensure proper supervision of children or pet.
Cubiio2 is not intended for children under the age of 15 years. Children under
the age of 15 years should be supervised to ensure they do not play around
the machine. Teenagers aged between 15 and 18 years can use the machine
with the consent and/or assistance of their parents or persons who have
parental authority over them.
Do not use Banned materials. [Refer to 5.2 Materials]
Materials containing chlorine will produce extremely toxic and corrosive
fumes when laser process. Reflective materials, such as materials with
mirror surfaces, will cause the laser to be reflected and potentially causing
injury to the user or damage to the machine.
Never run Cubiio2 unattended.
02
01 Safety
Choose dry powder or foam type fire extinguisher according to
different processed objects.If you see flame or fire - Immediately
stop the machine and extinguish.
Immediately call the fire brigade for Supports.
Clean and maintain the machine regularly. [Refer to 04 Caring]
Always unplug the power supply before cleaning and maintenance.
Cleanliness is important to safety and perform optimally. Processed debris
and ash left in the machine may reduce efficiency or cause fire.
Do not operate machine if damaged
Any damages to any components to the machine could compromise its
safety and cause injury. If any part of the machine is damaged, contact your
reseller or Muherz directly.
Do not place any liquids or flammable materials near or around
the device.
The dangerous items can result in electric shock or explosion or fire.
Do not look directly at the flame light generated during processing.
Looking directly at the light may cause visual impairment or other
light hazards.
03
01 Safety
Notices for Customers in the U.S.A.
Federal Communications Commission (FCC) Radio Frequency Interference
Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the follow-
ing measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/television technician for help.
Modifications
CAUTIONS
The FCC requires the user be notified that any changes or modifica-
tions made to this device that are not expressly approved by Muherz
may void the user’s authority to operate the equipment.
Notices for Customers in Europe
This symbol indicates that this product is to be collected separately.
The following apply only to users in European countries:
This product is designated for separate collection at an appropriate
collection point. Do not dispose of as household waste.
For more information, contact the retailer or the local authorities in
charge of waste management.
Caution: Use of controls or adjustments, or performance of procedures other
than those specified herein may result in exposure to hazardous laser radiation.
Use only Cubiio Certified Accessories
Only accessories certified by Cubiio specifically for use with your Cubiio2 are
engineered and proven to operate within its operational and safety requirements.
The use of non-certified accessories could damage your Cubiio 2 and void your
warranty.
04
02 Notices
Warnings & Signs
All signs of warnings and information on Cubiio 2 locate where they must be,
where may contains sources of dangers before and/or during operations. Do not
remove any of the signs for the safety.
Serial number labal
Serial number labal
02 Notices
Cubiio 2
Cubiio2Plus
05
3.1 Preparing Creative Space
A good environment is very important for using Cubiio2. We recommend you build
a comfortable and safe space of creativity by following the picture below.
RESTRICTED AREA / REMOTE INTERLOCK
Keep children / pets away from the machine.
User can set a remote interlock between machine and
door if needed.
FIRE BLANKET/ EXTINGUISHER
Necessary equipments.
SMOKE DETECTOR
It provids critical early warning for dangerous situations.
EXHAUST VENTING
Vent exhaust safely out of working space.
A fume extractor purifier is recommeded.
STABLE TABLE
Ensure machine is away from the edge and keep flammable
materials away from the machine.
06
03 Getting Started
WPS
3.2 Unbox 3.3 Overview
Packing List
Adaptor
Other Accessories
Filter Box
Working Area
Touch Switch/ State indicator light
Safety Key (Remote interlock) Socket
Power Plug
Power Switch
Leveling Feet
Inlet
Laser Head (Laser Aperture)
Exhaust hose &
socket
Power cord
*US type only
*Contents depend on your order
Outlet (Exhaust House Connector)
Reset
Cubiio2
07
03 Getting Started
3.4 Switch & Indicator Light Meanings Example Indicator Light
Breathing Cyan Initializing /
Wi-Fi configuration
Breathing
Slow on and slow off.
Warning
Instant on and slow off.
Three-flash
Periodically falsh three times.
Three-flash Cyan WPS setting
Breathing Green System is ready
(Pending)
State
Warning Purple Laser is ON
Warning Red Error
Three-flash Red Updating firmware
Homing
While Cubiio2 is pending (Breathing Green), you can run the laser head back to
the origin position by touching the switch for 3 seconds.
Pause/Resume
During a laser process (Warning Purple), you can pause or resume the work by
short touching the switch.
Stop
During a laser process (Warning Purple), you can STOP the work by touching the
switch for 1.5 seconds.
08
03 Getting Started
1
2
3
Loosen the 4 screws of rear fans by a PH2 screw driver.
Protective lid covering
films on both sides
Protective bottom
covering
Mount the socket by the 4 screws.
Attach the end of the exhaust tube to the socket. Ensure the
other side is placed to allow venting of fumes safely out of
the working space.
3. Attach Exhaust Hose
5
6
Step5 Connect the power & witch on.
4. leveling
Adjust the 4 leveling feet to level the machine. The two door
sensors should be triggered by the acrylic lid same time
after leveling.
Step2Peel off protective coverings
3.5 Setup
Scantoviewthe
demovideo
Step1
09
03 Getting Started
Table des matières
Autres manuels cubiio Instrument de mesure
Manuels Instrument de mesure populaires d'autres marques
Endress+Hauser
Endress+Hauser Proline Promag 50 Caractéristiques techniques
Siemens
Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces
KLINGER
KLINGER CMF V Series Manuel utilisateur
EXFO
EXFO FTB-2 Manuel d'exploitation et d'entretien
Keysight
Keysight M8290A Manuel utilisateur
ADTEK
ADTEK MW-5 Manuel utilisateur