Crystal Instruments Coco-80 Manuel utilisateur

CoCo-80 Quick

Reference

Vibration Data Collector Mode

7/24/2012

Crystal Instruments Corporation

2370 Owen Street

Santa Clara, CA 95054, USA

www.go-ci.com

+1 (408)986-8880

Document History

Crystal Instruments EDM®3.1.5.7

Software Release Notes

CoCo-80 Quick Reference

Vibration Data Collection Mode

Date

Issue

Changes

April 2012 Issue 1 Initial Release

May 2012 Issue 2 Edited for general

users

This document, or parts thereof, may not be reproduced in any form without the express

permission of Crystal Instruments Corporation.

All product names referenced herein are trademarks or registered trademarks of their respective

companies. The information contained in this document is subject to change without notice.

CoCo-80 Quick Reference

Table of Contents

INSTALLATION OF EDM SOFTWARE ..............................................1

What You Will Need ............................................................................. 1

Software Included on Installation CD ...................................................1

System Requirements........................................................................... 2

Hardware..........................................................................................2

Software ...........................................................................................3

EDM Software CD ................................................................................. 3

EDM Software Installation Wizard ....................................................... 4

EDM License Key ..............................................................................7

Where is My License Key? ....................................................................9

USB Device Driver ...............................................................................10

CREATING A DATABASE...............................................................15

Accessing a New Database .................................................................15

Creating Database Items: Factories, Machines, Points, Entries and

Routes.................................................................................................16

Adding Measurement Points ..............................................................21

RPM Multiplier ...............................................................................22

Diameter of Roller/Pulley...............................................................22

Adding Measurement Entries.............................................................23

Expected RPM ................................................................................24

CREATING A ROUTE .....................................................................28

UPLOAD AND DOWNLOAD OPTIONS ..........................................30

Upload Options................................................................................... 30

Replace Mode.................................................................................30

Combine Mode...............................................................................30

Uploading Data to CoCo .....................................................................31

Downloading Data from CoCo ............................................................32

CoCo-80 Quick Reference

Download from VDC to EDM with New Machine Added............... 32

Synchronize via USB ....................................................................... 33

Synchronizing via SD Card ..............................................................35

MANAGING DATABASES AND FACTORIES...................................37

Database Management ......................................................................37

Auto Backup ...................................................................................38

Auto Save........................................................................................38

Backup a Database .........................................................................39

Restore a Database ........................................................................39

Delete a Database ..........................................................................39

New or Change Database............................................................... 40

Load Demo Database .....................................................................40

Factory Management .........................................................................40

Export a Factory .............................................................................40

Import a Factory.............................................................................44

COCO MEASUREMENTS...............................................................47

Select Measurement Mode ................................................................ 47

CoCo Setup Page ............................................................................48

Route Measurements .........................................................................51

Reviewing Captured Data............................................................... 55

Soft Key Menu Options ..................................................................56

Onsite Measurements ........................................................................61

Configuring an Onsite Measurement .............................................61

TROUBLESHOOTING ....................................................................70

DECLARATION OF CONFORMITY .................................................77

CoCo-80 Quick Reference

Installation of EDM Software

What You Will Need

Installation of EDM requires a valid CoCo license key, as

well as an installation CD or file. For EDM to run, a SQL

database manager is necessary. EDM comes with an

installer for MSSQL if there is no SQL manager detected

on the system.

Software Included on Installation CD

The Installation CD includes Crystal Instruments’ EDM

software as well as several other necessary software

installers required for proper operation. EDM uses

Microsoft Word for generating reports, which should be

installed on your computer prior to the installation of

EDM. EDM does not include Microsoft Word in its

installation files.

EDM Software: This is the software and user interface

used to connect the CoCo hardware to the computer and

manage your data.

Microsoft SQL Server Software (MSSQL): A SQL server is

required. MSSQL Server is included to manage the

database system that stores route and measurement data

on the PC and CoCo.

USB Driver for CoCo: The USB driver is required to

connect the CoCo hardware to the PC with a USB

connection. The CoCo driver does not install

automatically, the location will need to be specified.

CoCo-80 Quick Reference

Microsoft .NET Framework: .NET will be installed

automatically if it is not already installed on your

computer.

Tip: Check with your system administrator or IT

department prior to installation. It is generally

a good idea to run Microsoft Windows Update

to make sure your system is completely up-to-

date with all security releases before you install

new software.

Note: Administrator privileges are required for

installation. Please contact your IT department

for information regarding installation of

applications.

System Requirements

Hardware

Memory: 512 MB

o1 GB recommended

CPU Speed: 1.0 GHz

o2.0 GHz recommended

CPU Type:

ox64 Processor: AMD Opteron, AMD Athlon 64,

Intel Xeon with Intel EM64T support, Intel

Pentium IV with EM64T support

ox86 Processor: Pentium III-compatible

processor or faster

Hard Disk: at least 1 GB of free space

A CD or DVD drive

Display

oResolution at least 1,024x768

A Microsoft mouse or compatible pointing device is

required.

CoCo-80 Quick Reference

Software

Framework:

o.NET Framework 3.5 SP1

oSQL Server Native Client

oSQL Server Setup support files

Software

oMicrosoft Windows Installer 4.5 or later

Network Software

oSupported operating systems have built-in

network software. Stand-alone named and

default instances support the following network

protocols:

Shared memory

Named Pipes

TCP/IP

VIA

Internet Software

oMicrosoft Internet Explorer 6 SP1 or later

EDM Software CD

Engineering Data Management (EDM) is PC software used

for data management, post signal processing, viewing,

reporting, and connecting Crystal Instruments hardware,

the PC, and the data storage system. EDM provides

connectivity to one or more CoCo devices. It provides

data management tools to search through many tests and

records, and view file properties or waveform

characteristics. The analysis tools display data in a wide

variety of formats and configurations to help identify

important signal characteristics using cursors. The report

tool documents the hardware configuration or data

analysis results in a user formatted document.

CoCo-80 Quick Reference

To install EDM and related software systems included on

the CD, place the installation CD in the CD drive of the

target PC. The Welcome Screen will automatically open as

shown below. If the Welcome Screen does not

automatically open, run the Setup.exe file on the root

level of the CD by selecting the physical drive with the CD,

opening the EDM folder, and double-clicking on

Setup.exe.

Figure 1: Welcome Screen for EDM Installation

Prior to installing EDM, MSSQL needs to be installed on

the system. The EDM installation will check for Microsoft

SQL 2008 R2 and install it if it is not already installed.

EDM Software Installation Wizard

To begin the installation the Engineering Data

Management (EDM) software, click Install EDM Software

(version X.X.X.X) from the EDM Welcome Screen to

launch the Installation Wizard.

CoCo-80 Quick Reference

Important: A SQL database software is

necessary for EDM to operate. The supported

database managers are MSSQL

(recommended, and installed by default) and

MySQL. If MySQL is preferred or currently used

for EDM database management, please refer

to Appendix 3 of the full CoCo-80 VDC Manual.

Figure 2: EDM Installation Wizard

Click Next to begin the installation process.

Review and accept the license agreement and click Next.

To install EDM a valid license key is required. If the default

location does not contain your license key, browse for the

correct folder. A license key file has a “.lic” file extension.

Once the license key has been specified, press Next.

Note:If you do not know the location of your

license key or do not have a license key, refer

to the section of this manual titled Where is

My License Key.

CoCo-80 Quick Reference

Specify whether to install Microsoft SQL Server 2008. This

is required for VDC mode to function and should be

checked. Press Next to begin the MSSQL installation.

Figure 3: Microsoft SQL Server Installation

Prompt

A series of windows will open displaying the installation

process. There is no input necessary during the MSSQL

installation.

Important: Do not close any windows during

the MSSQL installation.

Note: Having the computer and a user account

named the same can cause login errors. If

problems are encountered logging in to

MSSQL, verify that the computer name does

not match any user account. To check the

computer name, right-click on My Computer

and select properties. Computer name will be

on the first page. To check user name, right-

click on My Computer and select Manage.

Autres manuels pour Coco-80

Table des matières

Autres manuels Crystal Instruments Instrument de mesure

Crystal Instruments

Crystal Instruments Spider Manuel utilisateur

Crystal Instruments

Crystal Instruments Coco-80 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur