CRU Dataport Data Express DE75 SAS Manuel utilisateur

Rugged, Reliable, Mobile, SecureTM

1-800-260-9800 www.CRU-DataPort.com

Data Express DE75 SAS/SATA Install Guide

Removable SAS/SATA Drive Enclosure

Receiving Frame Board

Factory-Installed Jumper (Pins 15 & 17) – Factory-installed

jumper. DO NOT REMOVE!

Remote Activity LED (RLED) – These pins provide a remote

LED device activity indicator (Pin 13=Cathode, Pin 14-Anode).

Frame Data Connectivity – For SATA operation the SATA data

cable must be connected to the SAS/SATA Host 1 Connector.

SATA hard drives do not support the SAS Host 2 Connector. SAS

hard drives can use either SAS Host 1 Connector or SAS Host 2

Connector. The DE75 supports the SAS dual host feature for fail

over protection.

Note: SAS hard drives require a SAS host. SAS hard drives

will not work with a SATA host.

Frame Installation

For SATA operation connect a SATA data cable to the SATA/SAS

host 1 connector.

For SAS operation connect a SATA/SAS data cable to either

SATA/SAS Host 1 or SAS Host 2 connector.

For dual host capabilities connect SATA/SAS data cables to

SATA/SAS Host 1 and SAS Host 2.

Connect SATA power or ATX power to the power connectors on the

back of the DE75. The DE75 will support either ATX or SATA power.

Slide the frame into an available drive bay and secure the frame.

Drive Installation

1. Carefully insert the drive into the carrier. Slide the drive to-

wards the Drive Carrier Board, so that the I/O connector on the

drive mates with the connector on the Drive Carrier Board. Hold

the drive in place, then turn the drive/carrier assembly over.

2. Fasten the drive into place with the four provided #6-32

Phillips Under Cut Flat Hd. Screws. Some drives may require

minor adjustment to position before securing into carrier with

screws.

3. Install the provided drive cover. Insert the front end of the cover

ﬁrst and then slide the cover towards the rear of the carrier.

Secure drive cover with the two provided #4-40 Phillips Under

Cut Flat Hd. Screws.

The DE75 SAS/SATA is a low-proﬁle removable hard drive enclosure

designed to provide durable and reliable mounting for one (1) 3.5”

low proﬁle Serial ATA (SATA) 3.0 Gb/s or Serial Attached SCSI (SAS)

drive, within a standard or undersized 5.25” half-height peripheral

expansion slot. The low proﬁle ﬁller bracket can be removed for

space-constrained mounting.

Note: The DE75 SAS/SATA frame is not a universal frame

and does not support the DE75 IDE carrier. It is backwards

compatible and will support the DE75 SATA 1.5 Gb/s carriers.

Figure 2: Drive Installation Overview

Drive Cover

(provided)

SATA/SAS Drive

(not included)

Drive Carrier

Board

Drive Carrier

Figure 1: Receiving Frame Board (rear view)

Rugged, Reliable, Mobile, SecureTM

1-800-260-9800 www.CRU-DataPort.com

Package Contents

1 - Key set

1 - Alignment tool

2 - 4-40 x 1/8” Flathead screws (carrier cover)

4 - 6-32 x 1/4” Flathead screws (drive mounting)

4 - M3 x 6mm Trusshead screws (frame mounting)

Limited Product Warranty

CRU-DataPort (CRU) warrants the Data Express DE75 to be free

of signiﬁcant defects in material and workmanship for a period of

ﬁve years from the original date of purchase. CRU’s warranty is

nontransferable and is limited to the original purchaser.

Limitation of Liability

The warranties set forth in this agreement replace all other war-

ranties. CRU expressly disclaims all other warranties, including

but not limited to, the implied warranties of merchantability and

ﬁtness for a particular purpose and non-infringement of third-party

rights with respect to the documentation and hardware. No CRU

dealer, agent or employee is authorized to make any modiﬁcation,

extension, or addition to this warranty. In no event will CRU or

its suppliers be liable for any costs of procurement of substitute

products or services, lost proﬁts, loss of information or data, com-

puter malfunction, or any other special, indirect, consequential,

or incidental damages arising in any way out of the sale of, use

of, or inability to use any CRU product or service, even if CRU has

been advised of the possibility of such damages. In no case shall

CRU’s liability exceed the actual money paid for the products at

issue. CRU reserves the right to make modiﬁcations and additions

to this product without notice or taking on additional liability.

A7-075-0005 Rev. 1.0

Unit ID Select Switch Settings

Note: The unit ID number display is for ID display purposes only.

The following table lists the unit ID select switch settings.

Selecting the Unit ID Number: Use the alignment tool (pro-

vided) to select the ID number of the disk drive.

Figure 3: Unit ID Select Switch Location

NOTE: The lock on the Data Express serves as a power

switch. It must be engaged (turned counterclockwise) for the

Data Express to power up and function properly.

Alignment Tool

Unit ID Select Switch

Table 1: Unit ID Hex Reference

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels CRU Dataport Enceinte

CRU Dataport

CRU Dataport DataPort 3 Manuel utilisateur

CRU Dataport

CRU Dataport HotDock Secure Manuel utilisateur

CRU Dataport

CRU Dataport RTX800-XJ Manuel utilisateur

CRU Dataport

CRU Dataport RTX Secure 410-SJ Manuel utilisateur

CRU Dataport

CRU Dataport DE100 Series Manuel utilisateur

CRU Dataport

CRU Dataport 25 Secure Manuel utilisateur

CRU Dataport

CRU Dataport Rugged, Reliable, Mobile, Secure DataPort 2... Manuel utilisateur

CRU Dataport

CRU Dataport ToughTech Duo-QR Manuel utilisateur

CRU Dataport

CRU Dataport ToughTech m3 Manuel utilisateur

CRU Dataport

CRU Dataport 2U Manuel utilisateur

CRU Dataport

CRU Dataport Data Express DE275 Manuel utilisateur

CRU Dataport

CRU Dataport ToughTech Q Instructions d'utilisation et d'entretien

CRU Dataport

CRU Dataport Data Express DX115 SATA Manuel utilisateur

CRU Dataport

CRU Dataport DE110 Series Manuel utilisateur

CRU Dataport

CRU Dataport RJR110 Ultra320 Manuel utilisateur

CRU Dataport

CRU Dataport Data Express DE110 Ultra ATA133 Manuel utilisateur

CRU Dataport

CRU Dataport DataPort 350 Manuel utilisateur

CRU Dataport

CRU Dataport DataPort 350 Manuel utilisateur

CRU Dataport

CRU Dataport Multi-Lane DataPAK Manuel utilisateur

CRU Dataport

CRU Dataport 10 USB-to-SATA Manuel utilisateur

CRU Dataport

CRU Dataport TT-Q Manuel utilisateur

CRU Dataport

CRU Dataport RTX 610-IR Manuel utilisateur

CRU Dataport

CRU Dataport DE100 ATA 33 Manuel utilisateur

CRU Dataport

CRU Dataport DE50 SATA Manuel utilisateur

Manuels Enceinte populaires d'autres marques

SilentiumPC

SilentiumPC Armis AR5 Manuel

Pulsar

Pulsar 17/TRP80/DSPR Manuel utilisateur

Thermaltake

Thermaltake V150 TG Manuel utilisateur

MSI

MSI MPG SEKIRA 500X Manuel utilisateur

Antec

Antec Dark fleet DF-10 Manuel utilisateur

Nexans

Nexans WTC05 Manuel utilisateur

Peavey

Peavey DS 1502 Manuel utilisateur

D-Link

D-Link ShareCenter Pro DNS-1550-04 Manuel utilisateur

Rosewill

Rosewill RX82-U(JBOD) Manuel utilisateur

QNAP

QNAP SAS JBOD CLI 1.0 Manuel utilisateur

GAMDIAS

GAMDIAS Talos P1 Manuel utilisateur

Auvs

Auvs KR615 Manuel utilisateur

Digitus

Digitus DA-71114 Manuel utilisateur

CommScope

CommScope FDH 3000 Manuel utilisateur

FS FHD-FWME4 Manuel utilisateur

JBL

JBL CS1215T Manuel utilisateur

Pulsar

Pulsar ARAD-S4 Manuel utilisateur

Pulsar

Pulsar AWO454 Manuel utilisateur