2
Choose the most appropriate setting from a simple and practical point of
view. Your radio should not interfere with the driver or crash the driver's
knee or leg when rush brake.
t.1.
Put the Non-slip mat on the 2 ends of the bracket and put in the 2.
radio.Then insert the adjusting screws and check carefull each
screws, make sure the screws and machinme will not loose when
the car shaking.
Choose suitable angle by the 3 screw holes in the two ends of 3.
bracket.
onious
adjusted CB antenna, suitable antenna type and corect installation
will bring excellent commnuication.
To match with the radio, the antenna and cable shall with
characteristic impedance of 50ohm, or the antenna system will not
This radio adopt 13.8V power supply, never connect it to 24V battery,
become dark and Transmit power will drop down.
Connect positive red power cable with the + terminal of the battery.1.
Connect negative black power cable with the - terminal of the 2.
battery.
Screw the antenna connector into the antenna jack.1.
Grounding the antenna system to ensure best performance of 2.
this radio.
radio.
station shall equip of lightning protector
s.
the fuse holder from the cable.
The position of antenna can be put as following example:3.
