Croydex AM302021 Manuel utilisateur

Fixing Pack Contents

Flexi-Fix Riser Rail

Please follow these ﬁxing and care instructions to ensure that your product is

ﬁtted safely

and that it retains its high quality ﬁnish. Please retain this leaﬂet for future

reference.

Fixing Pack Contents / Tools Required

Home Safety Advice

It is recommended that two people ﬁt this product to ensure that it is ﬁtted safely.

Always take care when using power tools, particularly in the bathroom.

Always check for hidden cables and pipework before drilling and take extreme care if there is

any water in the working area.

It is advisable to use a residual current circuit breaker (RCCB)

Always wear suitable eye protection when drilling.

If the product is to be ﬁtted on a ceramic tiled wall, a ceramic drill bit should be used.

Always ensure that the drill hole passes through the central tiled area rather than through the

grouted area. To prevent damage to the tile, mask the area around the hole with tape before

drilling.

Do not strike the product with hard or sharp objects.

DO NOT USE AS A GRAB RAIL - Suitable for use with standard hoses and shower handsets.

Maximum load 5Kg.

Product Care

To retain the best quality ﬁnish, clean product regularly with a soft damp cloth.

Do not use abrasive or chemical cleaners, as these will damage the product.

KEEP DIY TOOLS OUT OF THE REACH OF CHILDREN

Important Adhesive Information

- The adhesive is suitable for use on most ﬂat ﬁnished surfaces, such as gloss paint, tiles,

polished stone, laminates and textured surfaces.

- Do not use on decorative wall paper ﬁnishes.

- Not suitable for unﬁnished materials such as brick, blockwork, emulsion paint and loose, ﬂaky

surfaces.

- Redecoration may be required on some painted surfaces after removal.

SWR 060 R03

ALWAYS CHECK THE PACKAGING FOR FIXINGS AND PARTS BEFORE THROWING AWAY AND RECYCLING.

PLEASE READ THROUGH AND FULLY UNDERSTAND THE INSTRUCTION LEAFLET BEFORE STARTING THE INSTALLATION

OF THIS PRODUCT.

ENSURE YOU HAVE ALL THE FIXINGS AND PARTS BEFORE ATTEMPTING TO ASSEMBLE OR FIT THIS PRODUCT!

CENTRES

AWHEN USING EXISTING HOLES

40mm

Drill holes

CHECK

LEVEL

WHEN DRILLING NEW HOLES

30mm

Centres

AM1824## /

AM1825## /

AM1826##

Max Distance =

720mm

TIP!

To ensure the

Riser Rail is

vertical, mark the

wall using one

wall plate and

using a spirit level,

mark the second

plate whilst being

careful not to

exceed the

recommended

centre distances.

NOTE

Wall plugs supplied

are suitable for a

solid wall ﬁxing

only.

For cavity walls or

plasterboard use

specialist ﬁxings

available from all

good DIY stores.

1Remove your old riser rail and make sure you clear the existing screw holes

of any debris.

2Fix your Flexi-Fix brackets to the wall using one of the three methods

below.

Remove old wall plate.

(PLATE SHOWN FOR

REFERENCE ONLY.)

CAUTION!

Ensure holes in

the wall are

sutiable for

re-use.

It may be

necessary to

drill new holes.

Using a pencil mark

the screw hole

centres for the wall

plates 30mm apart.

Insert wall plugs into the wall and ﬁx

the wall plates tightly into position

using screws supplied.

Flexi-Fix Wall Plate will ﬁt

existing hole centres of -

Max - 34mm apart

Min - 15mm apart

SWR 060 R03

AM3000## /

AM3020##

Max Distance =

600mm

Once the Flexi-Fix

wall plates are

secured to the

wall, place the

Riser Rail brackets

over each of the

Flexi-Fix wall

plates and secure

by tightening the

grub screw with

the hex key

provided.

DO NOT

OVERTIGHTEN.

WHEN USING ADHESIVE FIXING METHOD

LEAVE

HOURS

C( )

CHECK

LEVEL

Assemble wall plate, alignment

guide and locking nut as shown.

Remove backing from adhesive

pad on alignment guide.

Please refer to Important Adhesive Information at

the front of this leaﬂet before proceeding

Place assembled wall plate in

desired location and press ﬁrmly.

Cut the end of the sachet and apply

a generous amount of adhesive to

the back of the wall plate as shown.

(Each sachet has sucient adhesive

for two wall plates).

Carefully place the wall plate over the

alignement quide and allow the rotation

of the locking nut to secure the wall plate

in position. DO NOT PRESS IN POSITION!

Leave the adhesive to set for 24 Hours

Undo locking nut and remove wall

plate leaving the alignment guide

stuck to wall

Sucient

adhesive must be

applied to give a

uniform thickness

of approximately

1.5mm when the

wall plate is

positioned

against the wall.

Before starting

ensure all surfaces

are clean and free

from dirt and soap

residue,

particularly if

adhereing to tiled

walls.

SWR 060 R03

TIP!

To ensure the

Riser Rail is

vertical, mark the

wall using one

wall plate and

using a spirit level,

mark the second

plate whilst being

careful not to

exceed the

recommended

centre distances.

Step 3

Place the square

nut into the recess

in the back of the

wall bracket.

Partially insert the

grub screw into

the threaded hole

in the square nut.

Image shown for reference only - grub

screw previously ﬁtted into wall bracket.

AM1824## /

AM1825## /

AM1826##

Max Distance =

720mm

AM3000## /

AM3020##

Max Distance =

600mm

4With the wall brackets secured onto the

Flexi-Fix wall plates, insert the riser rail,

together with all accessories in

between the wall brackets.

SWR 060 R03

6You can adjust the height and rotation

to all of the accessories which are used

with the Flexi Fix Riser Rail as

demonstrated in the illustration.

Step 4

Step 5

5Remove the bracket end caps and secure

the riser rail in position by tightening the

grub screws using a ﬂat bladed

screwdriver.

Replace the wall bracket caps.

Step 6

Note:- Hose retaining ring not included

in Flexi-Fix Riser Rail AM182641.

Hose Retaining

Ring

CONTACT DETAILS

UK: Croydex, Central Way, Andover,

Hampshire, SP10 5AW, UK

EU: MIL, Unit 8 Purcellsinch Ind Est,

Dublin Road, Kilkenny, R95 HP71,

Ireland

Tel: +44 (0)1264 365881

Email: info@croydex.co.uk

www.croydex.co.uk

Ce manuel convient aux modèles suivants

Autres manuels Croydex Appareil de salle de bains

Croydex

Croydex TS 068 R02 Manuel utilisateur

Croydex

Croydex QM781941 Manuel utilisateur

Croydex

Croydex WC266205E Manuel utilisateur

Croydex

Croydex MM700100 Manuel utilisateur

Croydex

Croydex Flexi-Fix Riser Rail AM182041 Guide d'installation

Croydex

Croydex FLEXI FIX Manuel utilisateur

Croydex

Croydex QM391941 Manuel

Croydex

Croydex PA670100 Manuel utilisateur

Croydex

Croydex WA971022 Manuel utilisateur

Croydex

Croydex AD179441 Guide d'installation

Croydex

Croydex QM391941 Manuel

Croydex

Croydex AJ900041 Manuel utilisateur

Croydex

Croydex STICK 'N' LOCK PREMIUM Manuel utilisateur

Croydex

Croydex QM361941 Manuel utilisateur

Croydex

Croydex Flexi-Fix Manuel utilisateur

Croydex

Croydex AP2300 Manuel utilisateur

Croydex

Croydex LUXURY SQUARE ROD AD116441 Manuel utilisateur

Croydex

Croydex Luxury Round Shower Curtain Rod AD116541 Manuel utilisateur

Croydex

Croydex QM950122 Manuel utilisateur

Croydex

Croydex Hampstead Wall Mounted Accessory Manuel utilisateur

Croydex

Croydex GP78100 Manuel

Croydex

Croydex QM770341 Manuel utilisateur

Croydex

Croydex SLIMLINE GP87000SF Manuel utilisateur

Croydex

Croydex ATTRACTIVE PREMIUM QM770321 Manuel utilisateur

Manuels Appareil de salle de bains populaires d'autres marques

DURAVIT

DURAVIT C.1 C15240 0090 Manuel

Heatstore

Heatstore HSTRL500WTN Manuel utilisateur

Sunshower

Sunshower PURE SOLO Manuel utilisateur

Delabie

Delabie Delabie Sporting 714700 Manuel utilisateur

Kohler

Kohler K-13056 Instructions de montage

ESS

ESS Container TCL-11 Manuel utilisateur

Mustee

Mustee 22C Manuel utilisateur

VITRA

VITRA V-Flow Manuel utilisateur

baliv

baliv DUK-80.30 T Manuel utilisateur

Malmet

Malmet B105BT Manuel utilisateur

bathstore

bathstore Transition H1690MM Mode d’emploi

BELLOSTA

BELLOSTA Edward 0800/M Manuel utilisateur

baliv

baliv DU-5160 Manuel utilisateur

Franke

Franke PRTR0006 Manuel utilisateur

Gessi

Gessi RILIEVO 59011 Manuel utilisateur

noken

noken VITAE 100188525-N299998810 Manuel utilisateur

Allen + Roth

Allen + Roth 1142VA-30-201 Manuel utilisateur

Britex

Britex HBDA Manuel utilisateur