Crosscall Power pack Manuel utilisateur
POWER PACK
Thank you for your trust and for the purchase of this accessory.
The instruction manual will allow you to tame your new device and
make it easier for you to get started using it.
BENEFITS OF USE
1. Do not forget to recharge your power reserve. It recharges
automatically after charging your device.
2. POWER BANK function. Unplug your device from the power input
and your power reserve will take over.
3. Charge two devices at once and then the power reserve
4. International charger perfect for travelling and trekking. Built-in
US plug with easily interchangeable EU and UK plugs provided
5. Torch function
DESCRIPTION:
LED TORCH
DOUBLE USB
US PLUG
EU PLUG
UK PLUG
BATTERY
LEVEL
INDICATOR
ON BUTTON
CHARGING IN MAINS CHARGER MODE
1. Insert the appropriate plug
2. Plug the charger into the mains
3. Connect one or two devices to the USB port
Note: The charger delivers 2.1A of electrical current when a single
device is charging. If two devices are charging, the electrical current
delivered is then 1A to each device.
To change the plug, fold down the US connector against the power
reserve, and slide the EU or UK plug into place. A click indicates that
the plug is properly positioned and functional.
CLICK
INSTALLING THE INTERNATIONAL PLUGS:
RECHARGING THE POWER RESERVE
1. Insert the appropriate plug
2. Allow to charge. The LED indicator indicates the current charge
level.
3. During charging, the LED(s) indicate the level of charge reached,
and the blinking LED indicates the current level.
4. When the power bank is charged, all four LEDs remain on
Note: The power reserve will automatically recharge after charging a
device when it remains connected to the mains.
CHECKING THE BATTERY LEVEL USING THE INDICATOR
1. Briefly press the on button
2. The LED indicator gives you the battery level
Battery level:
75% - 100%
50% - 75%
25% - 50%
0% - 25%
Fully recharge your power bank's battery every 3 months in the
event of non-use.
USING THE TORCH
1. Press the on button until the torch turns on
2. To make the torch flash, press the on button a second time
3. To turn othe torch, press the button a third time
Use with the correct charger
Do not throw into fire
Do not incinerate
Do not short-circuit
Do not expose to temperatures above 60 °C / 140 °F or direct
sunlight
Recycle according to the standards in force
• Small parts may cause choking.
• Avoid extreme temperatures.
• Do not keep your device in extremely hot or cold places. (-10°C/
+60°C)
SAFETY AND USE OF THE BATTERY:
WARNING:
USING THE POWER RESERVE TO CHARGE A DEVICE.
1. Connect your cable (not supplied) to one of the two USB ports
2. Press the on button, and the charge will start automatically. Some
products require pressing briefly to start charging
3. After charging, remove the USB cable
• Do not attempt to disassemble or modify this product or any of
its components.
• Avoid impacts or damage to your Charger.
• Avoid using the connector to perform several actions and ensure
that the terminals of the battery do not touch any conductive
elements, such as metal or liquid.
• Stop using your device if any of its parts are cracked, broken or
if it overheats.
• Do not allow your children or pets to chew or lick the device.
• Do not press on your eyes, ears or any part of the body with your
device and do not put it in your mouth.
• Do not use your device outside during a thunderstorm.
• Do not place the unit near water or source of moisture, such as
a bathtub, sink, kitchen sink, pool, damp basement or other damp
locations. In general, do not use in case of inclement weather and
thunderstorms.
• Use only original accessories with this charger and do not use the
battery on another accessory.
• Before cleaning your device, unplug it from the power supply.
Clean the appliance with a soft, dry cloth. Do not use aggressive
cleaning agents or solvents such as petrol or alcohol: risk of damage
• This device is not intended for use by persons (including children)
with reduced physical, sensory or mental capacities, or persons
without experience or knowledge, unless they are supervised
by a person responsible for their safety or have received prior
instructions concerning the use of the device. Children should be
supervised to ensure that they do not play with the device.
Please observe the local regulations on the charger's package
concerning the battery and the disposal of used chargers, by
depositing them in the selective collection points so that they can
be properly recycled. Do not dispose of chargers or used batteries
in ordinary rubbish bins.
Please dispose of used lithium batteries that you do not want to
keep in a designated place for this purpose. Do not dispose of them
with household waste.
Assembled in China
Imported by: CROSSCALL
655 RUE P.S LAPLACE
13290 Aix en Pce - France
www.crosscall.com
CHARACTERISTICS:
POWER PACK
Battery capacity 3350 mAh
Output current 2.1A shared
Supply voltage 110-240V, 50/60 Hz
Type of battery Li-ion rechargeable
Charge time 3 hours
Dimensions 72x57x34 (mm) 2.8x2.24x1.3 inches
Weight 120 g
This symbol axed on the product indicates that it is a
device whose treatment as waste is subject to regulations on
electrical and electronic equipment waste (WEEE).
ENVIRONMENTAL PROTECTION:
Merci pour votre confiance et pour l’achat de cet accessoire.
Le manuel d’utilisation vous permettra d’apprivoiser votre nouvel
appareil et de vous en faciliter la mise en service.
BÉNÉFICES D’USAGE
1. N’oubliez plus de recharger votre réserve d’énergie, elle se
recharge automatiquement après la charge de votre appareil.
2. Fonction POWER BANK Débranchez votre appareil de la prise
secteur votre réserve d’énergie prends le relais.
3. Chargez en une seule fois 2 appareils puis la réserve d’énergie
4. Chargeur international idéal pour les voyages et le trek. Prise US
intégrée, EU et UK facilement interchangeables fournis
5. Fonction lampe torche
DESCRIPTION :
LAMPE TORCHE
À LED
DOUBLE USB
PRISE US
PRISE EU
PRISE UK
INDICATEUR
DE CHARGE
BOUTON MARCHE
RECHARGE EN MODE CHARGEUR SECTEUR
1. Insérer la prise appropriée
2. Brancher le chargeur au secteur
3. Brancher 1 ou 2 appareils au port USB
Note : Le chargeur delivre un courant de 2,1A lorsqu’un seul appareil
est en charge, si deux appareils sont en charge le courant délivré est
alors de deux fois 1A.
Pour changer de prise, rabattre les connecteurs US contre la réserve
d’energie, et faire coulisser la prise EU ou UK pour la mettre en place.
Un clic indique que la prise est bien positionnée et fonctionnelle.
CLIC
INSTALLATION DES PRISES INTERNATIONALES :
RECHARGE DE LA RÉSERVE D’ÉNERGIE
1. Insérer la prise appropriée
2. Laisser charger, l’indicateur à Led indique le niveau de Charge
en cours.
3. Pendant la charge la ou les Led indiquent le niveau de charge
atteint, la led clignotante indique le niveau en cours .
4. Lorsque la power bank est chargée les 4 Led restent allumées
Note : La réserve d’énergie se rechargera automatiquement après la
charge d’un appareil lorsqu’elle reste connectée sur le secteur.
CONTRÔLE DU NIVEAU DE CHARGE DE L’INDICATEUR
1. Eectuer un appui court sur le bouton marche
2. L’indicateur à Led vous donne le niveau de charge
Niveau de charge :
75% - 100%
50% - 75%
25% - 50%
0% - 25%
Rechargez entièrement la batterie de votre powerbank tous les 3
mois en cas de non-utilisation.
Table des matières
Langues :
Autres manuels Crosscall Chargeur de batteries
