1.7
Pinto BT-POM 1212 - Revision 5
Section 1 Pre-Delivery Check List
1 Operator’s Manuals Supplied:
• Pinto Parts & Operators Manual ................ ❑
• Auto Spray-Rate Controller Manual
(if fitted) ............................................................... ❑
2 Trailer
• Undamaged ...................................................... ❑
• Hitch height adjusted ..................................... ❑
• Hitch Jack lubricated ...................................... ❑
• Axle adjustment bolts tight (if applicable) ❑
• Axle nut adjustment, split pin in place ...... ❑
• Lubricate spring rockers (if applicable)..... ❑
• Check mudguards (if fitted) .......................... ❑
• Check paint ....................................................... ❑
3 Wheels & Hubs:
• Greased ............................................................. ❑
• Bearings adjusted ........................................... ❑
• Split pin and dust caps in place ................. ❑
• Wheel nuts tight & threads greased ......... ❑
• Check tyre pressure ....................................... ❑
4 Tank
• Undamaged ...................................................... ❑
• Agitator adjusted correctly ......................... ❑
• Check main lid opens and seals
shut correctly .................................................... ❑
• Basket strainer in place ................................. ❑
5 Check AllTank Fittings Are Sealed
• Agitators ............................................................. ❑
• Sump outlets ..................................................... ❑
• Tank rinse nozzle ............................................ ❑
6 Boom & Lift Device
• Undamaged ...................................................... ❑
• Check hydraulic height adjustment ........... ❑
• Check boom mounting bolts tight .............. ❑
• Unfold the boom, and .................................... ❑
• Align wing sections .................................. ❑
• Align wing extensions ............................. ❑
• Align balancing device ........................... ❑
• Adjust sliding surfaces ........................... ❑
• Grease the lift .................................................. ❑
• Check nozzle spacings ................................. ❑
• Check nozzle mountings tight .................... ❑
• Check all pins in place .................................. ❑
• Check shock absorber springs (if fitted) .❑
• Lubricate boom hinge points ...................... ❑
• Fold boom to transport position, and
• Check transport cradles ........................ ❑
• Check that hoses are not kinked or
jammed on folding ................................... ❑
7 Power Drive
(a) PTO
• Check quick release pins operate
easily and lock into place ............................. ❑
• Check universal joints work correctly ...... ❑
• Adjust PTO length to suit tractor ............... ❑
• Grease telescopic sliding shaft .................. ❑
• Grease universal joints ................................. ❑
• Check safety shields are in place ............. ❑
(b) Hydraulic Pump Drive & Filling Pump
(if fitted)
• Check pressure & return lines are
identified for Hydraulic pump drive ......... ❑
• Check revs set correctly for hydraulic
pump drive .............................................. ❑
• Check liquid pump operates correctly .... ❑
• Check filling pump operation &
control tap ............................................... ❑
8 Pump
• Check mountings ............................................ ❑
• Check oil level .................................................. ❑
• Check air chamber pressure -
70-100kPa (10-15 psi) .................................. ❑
• Check operation .............................................. ❑
9 Suction Lines
• Undamaged ...................................................... ❑
• Hoses - no kinks or restrictions ................. ❑
• All joins sealed (no air leaks) ...................... ❑
• Filter clean & sealed ...................................... ❑
10 Pressure Lines
• Undamaged ...................................................... ❑
• Hoses - no kinks or restrictions ................. ❑
• All hoses sealed (no leakages) .................. ❑
• Filter clean & sealed ...................................... ❑
11 Bottom-Fill (Spray/Flush Tanks)
• Check bottom-fill operates ........................... ❑
• Filter clean & sealed ...................................... ❑
• Check hoses properly sealed ..................... ❑
• Check caps & plugs in place ...................... ❑
12 Nozzles
• Undamaged ...................................................... ❑
• Nozzle filters clean ......................................... ❑
• Nozzles correct type throughout ............... ❑
• Nozzle caps sealed (no leakages) ........... ❑
• Non-drip diaphragms working .................... ❑
• Check fenceline sprayer operation (if fitted) ❑
13 Agitation
• Check agitator works correctly .................. ❑
• Check hoses are properly sealed ............. ❑
14 Chem-E-Flush (if fitted)
• Check unit is undamaged ............................ ❑
• Check hoses/fittings seal correctly ........... ❑
• Check Chem-E-Flush operation ................ ❑
15 Chemical Probe (if fitted)
• Undamaged ...................................................... ❑
• Check fittings seal correctly ........................ ❑
• Check probe operation ................................. ❑
• Check caps & plugs in place ..................... ❑
16 Electric Controls (Standard)
• Check installation ........................................... ❑
• Check battery connection ............................ ❑
• Fully check controls operation ................... ❑
17 Auto Spray-Rate Controller (if fitted)
• Check installation ........................................... ❑
• Check battery connection ............................ ❑
• Calibrate controller ......................................... ❑
• Fully check controller operation ................. ❑
18 Fresh Water & FlushingTanks
• Undamaged ..................................................... ❑
• Check fittings ................................................... ❑
• Check operation ............................................. ❑
19 Main Control & Drain Valves
• Check there are no leaks ............................ ❑
• Check all valves open & close easily ...... ❑
20 Foam Marker (if fitted)
• Check installation ........................................... ❑
• Check battery connection ............................ ❑
• Check foam tank mountings ....................... ❑
• Hoses - no kinks or restrictions ................. ❑
• All joins sealed (no air leaks) ..................... ❑
• Check filters are clean ................................. ❑
• Check foam marker & in-cab control
operation ........................................................... ❑
21 Gooseneck Option (if fitted)
• Gooseneck correctly fitted to vehicle ...... ❑
• Electric/hydraulic power pack & loom
fitted correctly to vehicle .............................. ❑
• Electric brakes working & adjusted
correctly (if fitted) ............................................ ❑
• Gooseneck complies with State &
Federal Road Laws ....................................... ❑
• Honda pump drive fully operational & oil
level checked ................................................... ❑
22 Decals
• Check all decals are in place ..................... ❑
The Pre-Delivery Check List must be completed by the Dealer & signed by both the Dealer and the Owner, and the white copy returned by the Dealer to Croplands.
✔✔✔✔
Tick each box to affirm completion
DEALER:
Dealership Name: (Print)
.................................................................................
Address: ..................................................................
.................................................................................
.......................................... Postcode: ......................
Signature of Dealer Representative
.................................................................................
Date: .............................
OWNER: Farmer ❑Contractor ❑
Owner's Name: (Print)
.................................................................................
Address: ..................................................................
.................................................................................
.......................................... Postcode: ......................
Phone: .....................................................................
Mobile: .....................................................................
Email: ......................................................................
Signature of Owner
.................................................................................
Date: .............................
Tick each box to affirm completion Tick each box to affirm completion Tick each box to affirm completion
Top Copy (White) - Forward to Croplands; Second Copy (Yellow) - Dealer’s Copy; Third Copy (Blue) - Owner’s Copy.
✔
Tick appropriate box
