Cromtech TG6500VE Manuel utilisateur
CROMTECH AVR GENERATOR
OPERATION MANUAL
6500W AVR GENERATOR
Pg. 2
Thank you for purchasing a Cromtech Generator.
This manual provides understanding of the operaon
and maintenance of your generator. Please read this
manual carefully before operang.
For any quesons regarding operaon or maintenance,
please consult your local service agent. Find your local
service agent at www.crommelins.com.au.
IMPORTANT ICONS
Important informaon is disnguished by the nocaons
below. The Safety Alarm Symbol ( !) alerts you to
potenal hazards. Please obey all safety informaon in the
symbol to avoid any possible injury or even death.
!DANGER: - Indicates a hazardous situaon which, if
not strictly complied with, will result in substanal property
damage, serious injury or DEATH.
!WARNING: Indicates a hazardous situaon which, if
not strictly complied with, may result in property damage,
!CAUTION: Indicates a hazardous situaon which, if
not strictly complied with, could result in property damage
or injury.
!NOTE: Indicates important informaon to simplify
operaon and understanding.
!WARNING: PLEASE READ AND UNDERSTAND THIS
MANUAL BEFORE OPERATING THE PUMP.
!NOTE: We connually seek advancements in product
design and quality. Therefore, there may be minor
discrepancies in actual machine and the printed manual.
INDEX:
Warranty ..................................................................... 4
Safety Warnings .......................................................... 5
TG6500VE Features ....................................................... 8
Generator Specicaons .............................................. 9
Features ..................................................................... 9
Geng Started ............................................................ 10
Unpacking .................................................................. 10
Assembly .................................................................... 10
Baery and Parts ......................................................... 12
Operang Checklist ...................................................... 13
Operang area ........................................................... 13
Operang condion ................................................... 13
Check engine oil ........................................................... 14
Check fuel levels .......................................................... 15
Electrical Devices ......................................................... 16
Grounding ................................................................... 16
Starng the Generator ................................................. 17
Connecng electrical devices .................................... 19
Maximum capacity .................................................... 19
Waage reference guide ........................................... 20
Charging a baery ..................................................... 21
Stopping the generator ............................................. 22
General Maintenance .................................................. 23
Maintenance schedule .............................................. 24
Generator maintenance ............................................ 24
Engine oil ................................................................... 25
Air lter ..................................................................... 26
Spark plug .................................................................. 27
Spark arrestor ............................................................ 28
Engine speed ......................................................... 28
Adjustments .......................................................... 28
Troubleshoong ......................................................... 29
Storage and Transport ................................................ 29
Storage ..................................................................... 29
Long term storage .................................................... 29
Transport .................................................................. 30
Pg. 3
WARRANTY
CROMTECH™and CROMMELINS™ are a registered trademark of The
Crommelin Group. Crommelins warrants their goods against defects in
materials and workmanship under normal use and service.
The Crommelin Group warranty does not cover fair wear commensurate
with the age of the product, any damage caused by accident, abuse, misuse,
neglect or failure to observe proper operang instrucons or proper
machinery maintenance as described in the instrucon manual.
It is the owner’s responsibility to regularly maintain a product in accordance
with the owner’s manual and only use the equipment for its designed
purpose.
Our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entled to a replacement or refund for
a major failure and for compensaon for any other reasonably foreseeable
loss or damage. You are also entled to have goods repaired or replaced if
the goods fail to be of acceptable quality and the failure does not amount to
a major failure.
CONSUMER ADVICE
Any claim under these warranes must be made in the warranty period
from the date of purchase of the product.
There are over 185 naonal authorised service/repair agents available, visit
www.crommelins.com.au for their details and locaons.
To make a claim under the warranty, you must return the product (with
proof of purchase) to the closest warranty agent or to the place of purchase.
Where a failure does not amount to a major failure, Crommelins Machinery
is entled to choose between providing you with a repair, replacement or
refund. To obtain compensaon, you would need to provide documentary
evidence of the loss or damage suered, and documentary evidence that
such loss or damage was a reasonably foreseeable consequence of a failure
by The Crommelins Group to comply with a consumer guarantee under the
Australian Consumer Law.
Crommelins Operaons Pty Ltd trading as The Crommelin Group,
Crommelins Australia and Crommelins Machinery
THE CROMMELIN GROUP:
Ph: (08) 9350 5588 Fax: (08) 9451 6381
recepon@crommelins.com.au
www.crommelins.com.au
PO Box 352, BENTLEY WA 6982
ABN 11 008 889 656
Pg. 4
SAFETY WARNINGS
! WARNING: DO NOT Operate this generator unl
you have read ALL safety, operaon, and maintenance
instrucons listed in this manual.
• Failure to follow the instrucons may result in property
damage, INJURY or DEATH.
• The warnings and precauons discussed in this manual
cannot cover all possible condions and situaons that
may occur. It must be understood by the operator that
common sense and cauon are factors which cannot
be built into this product, but must be supplied by the
operator.
! WARNING: Modicaons to any part of the generator
is not allowed and may void your warranty.
! WARNING: This generator is intended for residenal
consumer use only. This generator is not designed for
permanent setup.
! WARNING: Before each use, check for loose or
damaged parts, signs of oil or fuel leaks, and any other
condion that may aect proper operaon. Repair or
replace all damaged or defecve parts immediately.
• Locate all operang controls and safety labels.
• Operate only on level surfaces.
• DO NOT expose generator to excessive moisture, dust,
or dirt.
• Keep all safety guards in place and in proper working
order at all mes.
• DO NOT allow any material to block the cooling slots.
• DO NOT allow children or untrained persons to operate
the generang set.
• DO NOT run the generang set unaended. Turn o the
generang set before leaving the area.
!DANGER: FIRE OR EXPLOSION - Gasoline is highly
ammable and extremely explosive.
• Fire or explosion can cause severe burns or death.
• Keep ammable items away while handling gasoline.
• Fill fuel tank outdoors and in a well-venlated area with
the generator stopped.
• Always wipe o spilled fuel and wait unl the fuel has
dried before starng the generator.
Pg. 5
• DO NOT operate the generator with known leaks in the
fuel system.
• Use proper fuel storage and handling procedures. DO
NOT store fuel or other ammable materials nearby.
• Empty the fuel tank before storing or transporng the
generator.
• Keep re exnguisher handy and be prepared if a re
starts.
!DANGER: TOXIC FUMES - The exhaust of the generator
engine contains carbon monoxide, an odorless, colorless,
poison gas. Using engine indoors CAN KILL YOU!
• NEVER use generator inside any building or any kind of
enclosure, EVEN IF doors and windows are open.
• Place the generator in a well-venlated area and
consider wind and air currents when posioning the
generator
!DANGER: MOVING PARTS - Moving parts can cause
severe injury. Keep hands and feet away.
• DO NOT operate generator with covers, shrouds, or
guards removed.
• DO NOT wear loose-ng clothing, dangling drawstrings
or items that could become caught. Tie up long hair and
remove jewelry.
• NEVER place ngers, hands, or body near the engine
when it is running.
!DANGER: KICKBACK - Rapid retracon of the starter
cord will pull hand and arm towards the engine faster than
you can let go.
• Unintenonal startup could result in an injury.
!WARNING: HOT SURFACE - The running generator
produces heat. Severe burns can occur on contact.
• DO NOT touch generator while operang or just aer
stopping. Avoid contact with hot exhaust gases.
• Maintain at least three feet of clearance on all sides to
ensure adequate cooling.
• Combusble material can catch re on contact. Maintain
at least one metre of clearance from combusble
materials.
!WARNING: ACID (For types equipped with baery) - Be
careful when using any baery.
• Keep away from open ame, heat or spark.
• Baery will exhaust hydrogen while charging. Only
Pg. 6
charge a baery in a well venlated place.
• Avoid spilled baery acid. If contact with skin is made,
wash immediately with clean water.
!WARNING: ELECTRICAL SHOCK - This generator
produces powerful voltage and the electricity CAN KILL
YOU.
• This generator must be properly connected to an
appropriate ground to help prevent electric shock.
Failure to properly ground generator can result in
electrocuon, especially if the generator is equipped
with a wheel kit. Consult an electrician for local
grounding requirements.
• To reduce the risk of electrical shock, DO NOT use
electrical cords that are worn, frayed, bare or otherwise
damaged.
• DO NOT touch bare wires or receptacles.
• DO NOT operate generator in wet weather. Keep the
generator dry.
• DO NOT handle generator or electrical cords while
standing in water, while barefoot, or while hands or feet
are wet.
• DO NOT allow unqualied persons or children to operate
or service the generator.
Pg. 7
TG6500VE FEATURES & CONTROLS
Pg. 8
❶ Fuel cap
❷ Fuel level indicator
❸ Fuel tank
❹ Frame
❺ Wheels
❻ Cylinder head
❼ Muer guard
❽ Push handle
❾ Air lter
❿ Recoil starter
⓫ Support bracket
⓬ Fuel switch
⓭ Baery
⓮ Control panel
⓯ Engine switch
⓰ DC Baery charging
⓱ DC Overload switch
⓲ RCD Circuit breaker
⓳ AC Overload reset buon
⓴ DC Overload reset buon
GENERATOR SPECIFICATIONS
Model TG6500VE
Max. Output (W) 6500w
Cont. Rated Output (W) 6000w
Rated Voltage 230V / 50Hz
Power Factor 1.0
Engine Cromtech
Engine Features OHV, air cooled
Displacement 420cc
Fuel Type Petrol
Fuel Tank 25L
Oil Capacity 1.1L
Decibels at 7m (db) 74db
Weight (kg) 87kg
Packaging (LxWxH) 715x545x605mm
FEATURES
• 2x Outlets (single phase - 15 Amp)
• Electric start and recoil start
• Fold-out handles
• Steel frame with large wheels
• 4-Stroke, air cooled, OHV engine
• Hours operaon, Hz, Voltage meter
• Baery charging (12V-8.3Amp)
• Low oil alarm, overload alarm, output indicator
• Large 25L fuel tank
• 1 Year Cromtech warranty
Pg. 9
GETTING STARTED
! NOTE: DO NOT Operate this generator unl you have
read ALL safety, operaon, and maintenance Instrucons
listed in this manual.
1. UNPACKING - Remove the generator from the shipping
carton
I. Place the shipping carton on a solid, at surface.
Ii. Carefully cut each corner of the carton box from top
to boom. Fold each side at on the ground.
Iii. Remove everything from the carton except the
generator.
2. ASSEMBLY - Your generator requires some assembly. If
you have any quesons regarding the assembly of your
generator, please have your model number and serial
number ready and consult your local dealer for help.
INSTALL WHEEL KIT - Put wheel stop pin through
wheel and mounng lug hole, then x it with the clip.
❶Clip
❷ Wheel
❸ Wheel stop pin
INSTALL SUPPORT BRACKET - Connect bracket nuts,
seats, support bracket and bolt to frame.
❶ Support bracket nut M8
❷ Damping seat nut M6
❸ Support bracket
❹ Damping seat
❺ Damping seat nut M6 x18
❻ Support bracket bolt M8 x16
Pg. 10
Table des matières
Autres manuels Cromtech Générateur portable
