CRL JACKSON 2086 Manuel utilisateur
11M0263
INSTALLATION INSTRUCTIONS
CRL JACKSON 2086
CONCEALED VERTICAL ROD
PANIC EXIT DEVICE
Phone: (800) 421-6144 • Fax: (866) 921-0531
crlaurence.com • usalum.com • crl-arch.com
crlaurence.com
CRL JACKSON PANIC EXIT DEVICES - 2086 CONCEALED VERTICAL ROD
crlaurence.com | usalum.com 02
PARTS IDENTIFICATION ���������������������������������������������������������������������������� 03 - 04
DOOR PREPARATION ����������������������������������������������������������������������������������� 05
LAYOUT SELECTION ������������������������������������������������������������������������������� 06 - 09
HARDWARE INSTALLATION ������������������������������������������������������������������������ 10 - 14
INSERT ROD AND CASE ����������������������������������������������������������������������������� 10
INSTALL MORTISE CYLINDER LOCK AND MOUNTING PAD (OPTIONAL) ��������������������������� 11
INSTALL EXTERIOR LOCKING LEVER TRIM (OPTIONAL) ����������������������������������������� 12
INSTALL 2086 EXIT DEVICE ������������������������������������������������������������������������� 13
OPERATIONS CHECK AND DOGGING INSTRUCTIONS ��������������������������������������������� 14
FRAME PREPARATION AND STRIKE INSTALLATION ���������������������������������������������� 15 - 16
DOOR HARDWARE ADJUSTMENTS - UPPER AND BOTTOM BOLT�������������������������������������� 17
PACKAGE PARTS AVAILABLE ��������������������������������������������������������������������������� 18
ORDER OF ASSEMBLY AND INSTALLATION
NOTE: Any modications, other than those specied in this document, could result in this product's failure
to meet UL safety ratings and void the manufacturer’s warranties.
TOOLS REQUIRED
Drill Bits: 1/8", 9/32", 5/16",
7/32", 5/8", 11/16", 1-3/8"
Taps: 1/4-20, 10-32, 8-32
Tape Measure
Saw Horses
Cordless Drill
Phillips Head Screw Driver
Framing Square
Masking Tape
Center Punch
Flat Metal File
Round Metal File
Jigsaw with Metal Cutting Blade
Straight Edge
The rapidly changing technology within the architectural aluminum products industry demands that U.S. Aluminum reserve
the right to revise, discontinue or change any product line, specication or electronic media without prior written notice.
NOTE: Dimensions in parentheses ( ) are millimeters unless otherwise noted.
CRL JACKSON PANIC EXIT DEVICES - 2086 CONCEALED VERTICAL ROD
crlaurence.com | usalum.com 03
PARTS IDENTIFICATION
FASTENERS PROVIDED USED WITH
CALL
OUT QTY. FASTENER FASTENER
DESCRIPTION PART PART NUMBER
AND DESCRIPTION
A2
1/4"-20 x 1/4"
Shoulder Stud
Screws
302617 and 302619
Active Head Assembly
11/4"-20 x 1/4"
Shoulder Stud Screw
301266 Base End
Cap Package
21/4"-20 x 5/16"
Set Screw
302617 and 302619
Active Head Assembly
11/4"-20 x 5/16"
Set Screw
301266
Base End
Cap Package
4#10 x 1/2" FH
Self Tapping Screw
30934 Top Bolt Guide
30320 Bottom Bolt Guide
Assembly
2#10-32 x 3/4" FH
Machine Screw
30824
Trip Bracket Package
11/4"-20 x 1"
Adjustment SScrew 30824
Trip Bracket Package
4#10-32 x 3/8" FH
Machine Screw
301084 Top and Bottom
Strike Package
2 #8-32 x 2" FH
Machine Screw
30821J
Optional Mortise Cylinder
Mounting Pad
2#10-32 x 2-1/8"
FHMS
8500LV01 and 8500LV02
Optional Exterior Trim
with Lever Assembly
A
B
B
C
D
E
F
G
H
CRL JACKSON PANIC EXIT DEVICES - 2086 CONCEALED VERTICAL ROD
crlaurence.com | usalum.com 04
PARTS IDENTIFICATION
PARTS LIST
CALL
OUT PART PART NO. DESCRIPTION
DL2170 Optional 1" Single
Mortise Cylinder
30799
Actuator Link included in 2086
Active Head Assembly
Hardware Package 302607
30915J Rod and Case Assembly - 7/0
30PBAW Bolt Guide
Adjustment Wrench
301347
301348
Optional 12" and 24"
Top Rod Extender
301552PKG Rod Silencers (12 Pkg.)
N
I
J
K
L
M
CRL JACKSON PANIC EXIT DEVICES - 2086 CONCEALED VERTICAL ROD
crlaurence.com | usalum.com
NOT TO SCALE
05
DOOR PREPARATION
1. Place the door horizontally on the stands interior side up.
2. Mark the stile centerlines 1-1/8" (28.6) from the inside edge. (Fig. 1)
3. Mark the corresponding layouts on to the stile using the vertical centerlines at the specied height. (Fig. 2)
REMOVE DOOR AND PREPARE PER TEMPLATE
1-1/8"
(28�6)
Y
FIG. 1
TEMPLATES
FIG. 2
BOTTOM RAIL
TOP RAIL
ACTIVE STILE
INTERIOR VIEW
SEE TEMPLATE FOR
HEIGHT DIMENSIONS
YY
YY
XX
X
Y
X
Y
HINGE STILE
CRL JACKSON PANIC EXIT DEVICES - 2086 CONCEALED VERTICAL ROD
crlaurence.com | usalum.com
NOT TO SCALE
06
DOOR PREPARATION – LAYOUT SELECTION
2086 EXIT DEVICE INSTALLATION - ACTIVE STILE
Edge of Door
Edge of Door
Use Template from Box
35" (889) to Bottom
of Door From This Line
FIG. 3
Drill and Tap
for a 1/4"-20
Machine Screw
(2)-Places
Glass Stop
Glass Stop
INTERIOR VIEW
ACTIVE STILE
2086 Active Side
Mounting Inside Face
10-952
CRL JACKSON PANIC EXIT DEVICES - 2086 CONCEALED VERTICAL ROD
crlaurence.com | usalum.com
NOT TO SCALE
07
FIG. 4
DOOR PREPARATION – LAYOUT SELECTION
2086 EXIT DEVICE INSTALLATION - INACTIVE STILE
Edge of Door
Edge of Door
Drill and Tap
for a 1/4"-20
Machine Screw
38-5/32" (969) to Bottom
of Door From This Line
Glass Stop
Glass Stop
Use Template from Box
INTERIOR VIEW
INACTIVE STILE
2086 Inactive Side
Mounting Inside Face
10-952
CRL JACKSON PANIC EXIT DEVICES - 2086 CONCEALED VERTICAL ROD
crlaurence.com | usalum.com
NOT TO SCALE
08
FIG. 6
DOOR PREPARATION – LAYOUT SELECTION
Edge of Door
Edge of Door
Drill and Counter
Sink for a 8-32
FHMS (2) Places
Edge of Door
FIG. 5
2086 EXIT DEVICE INSTALLATION WITH LOCK CYLINDER AND MOUNTING PAD
35" (889) to Bottom
of Door From This Line
Drill and Tap for
a 8-32 FHMS
(2) Places
Edge of Door
CUT
OUT
Drill and Tap
for a 1/4"-20
Machine Screw
(2) Places
Glass Stop
Glass Stop
Glass Stop
Glass Stop
EXTERIOR VIEW
ACTIVE STILE
Use Template from Box
Use Template from Box
INTERIOR VIEW
ACTIVE STILE
37-7/8" (962) to Bottom
of Door From This Line
CRL JACKSON PANIC EXIT DEVICES - 2086 CONCEALED VERTICAL ROD
crlaurence.com | usalum.com
NOT TO SCALE
09
FIG. 8
DOOR PREPARATION – LAYOUT SELECTION
Edge of Door
Edge of Door
Drill and Counter
Sink for a 10-24
FHMS (2) Places
Edge of Door
FIG. 7
2086 EXIT DEVICE INSTALLATION WITH EXTERIOR LOCKING LEVER TRIM
35" (889) to Bottom
of Door From This Line
Drill and Tap for
a 10-24 FHMS
(2) Places
Edge of Door
35" (889) to Bottom
of Door From This Line
Drill and Tap
for a 1/4"-20
Machine Screw
(2) Places
Glass Stop
Glass Stop
Glass Stop
Glass Stop
INTERIOR VIEW
INACTIVE STILE
Use Template from Box
Use Template from Box
EXTERIOR VIEW
ACTIVE STILE
CRL JACKSON PANIC EXIT DEVICES - 2086 CONCEALED VERTICAL ROD
10
crlaurence.com | usalum.com
NOT TO SCALE
DOOR HARDWARE INSTALLATION (CONTINUED)
INSERT ROD AND CASE
1. Insert the panic device rod and case assembly into
active stile (Fig. 9)�
2. Align actuator pin through the slotted cut-out on interior
face of stile, fastening with (2) 1/4"-20 x 1/4" shoulder
stud screws. (Fig. 10)
3. Adjust the bottom and top bolts, to extend 1/2" past the
top and bottom stiles.
4. Install the top bolt guide assembly using (2) #10 x 1/2" FH
self threading screws at the top of the active door stile.
The (2) holes face the interior side.
5. Install the bottom bolt guide assembly using (2) #10 x 1/2" FH
self threading screws at the bottom of the active
door stile. The (2) holes face the interior side of stile.
6. Attach A (1) 1/4"-20 x 1/4" shoulder stud screw on the Inactive
Stile. (Fig. 10)
FIG. 9
A
C
C
ACTIVE STILE
Bottom
Bolt Guide
(2) #10 x 1/2" FH
Self Tapping Screws
(2) 1/4"-20 x 1/4"
Shoulder Stud Screws
FIG. 10
ACTIVE STILE
A
C
INACTIVE STILE
(1) 1/4"-20 x 1/4"
Shoulder Stud Screw
A(2) #10 x 1/2" FH
Self Tapping Screws
C
Top
Bolt
Guide
Table des matières
