CrimeStopper RS800ER Manuel utilisateur

RS800ER / RS801

REMOTE ENGINE STARTING SYSTEM

OPERATING INSTRUCTIONS

CONGRATULATIONSonyourchoice ofa CoolStart™ Remote Engine Starter by Crimestopper Security Products

Inc. This booklet contains the information necessary for using & maintaining your remote start system. If any

questions arise, contact your installation dealer or Crimestopper Security Products Inc. at (800) 998-6880.

OPERATION CAUTIONS & WARNINGS

CRIMESTOPPER SECURITY PRODUCTS, INC. and its VENDORS shall not be liable for any accident resulting from the use of this

equipment. This system is designed to be professionally installed onto a vehicle in which all items, such as parking brake and all

associated components, door switches, transmission shift linkage, throttle linkage, and all engine safety features, are in perfect

working condition.

DO NOT install this Remote Engine Starting System on MANUAL TRANSMISSION vehicles. If accidentally left in gear the

vehicle could become a self-propelled threat to life and property.

IT IS ABSOLUTELY THE OWNER’S SOLE RESPONSIBILITY TO: A) Understand the operation of this system and its safety

features. B) Check for proper operation of these safety features prior to accepting delivery of the vehicle from the installation facility.

C) Check and maintain the condition of the vehicle and all items relative to the proper operation of this system and its safety features.

D) Always leave the doors and windows closed and locked to protect against accident and theft.

DO NOT remote start the vehicle in a closed garage. Make sure that the garage door is open or there is adequate ventilation.

Failure to observe this rule could result in injury or death from poisonous Carbon Monoxide fumes.

IT IS ABSOLUTELY THE OWNERS SOLE RESPONSIBILITY TO: make certain the vehicle PARKING BRAKE is properly adjusted

and will hold the vehicle securely in all parking conditions, and to periodically check and maintain proper adjustment.

This device complies with FCC Rules part 15. Operation is subject to the following

two conditions: 1) This device may not cause interference, and (2) this device must

accept any interference that may be received, including interference that may

cause undesired operation. The manufacturer is not responsible for any radio or

TV interference caused by unauthorized modification to this equipment. Such

modification could void the user's authority to operate the equipment.

OPERATING THE REMOTE TRANSMITTER (RS800 ONLY)

The transmitter supplied with this RS800 system has (2) buttons / channels.

#1 #2

START

LOCK/ REMOTE

START

UNLOCK

RIME

TOPPER

REMOTE ENGINE CONTROL

REMOTE ENGINE STARTING -SUCCESSFUL START:

1) Press remote start button or for RS801 model, activate the Green Start input wire.

2) Parking lights flash once, then turn ON along with the IGN/ACC circuits

3) After 6 seconds Starter Motor engages. (Parking lights and Acc circuits turn off while cranking.)

4) Engine Starts and Runs. Parking Lights and Acc turn back on, Doors Lock.

5) Enginewill remainrunning forprogrammed runtimeor untilresetwith Brakepedal. If needed,theengine canbe

turned off with remote transmitter or for RS801 model, activating the Green Start input wire again.

AFTER

IGN

STARTER

THEN

FLASH 1X

SOLID

SEC.

START

NOTE: When using the

optional

Starter Disable feature without

power door locks, be certain to

install the supplied L.E.D. which

will be your only

indication that

the Starter Disable is active. You

must press the UNLOCK button on

the transmitter if the L.E.D. is

flashing or t

he vehicle will not

start.

REMOTE ENGINE CONTROL

REMOTE ENGINE STARTING -UNSUCCESSFUL START

In the event that the engine does not start on the first attempt, the system shuts down for a few seconds, then

attempts to restart the engine a 2nd and 3rd time. Forhard starting engines,the unit willallow astarter crank timeof

upto13 secondsmaximum. This shouldprovide amplecrankingtime fordifficult starts,butis limitedto13 seconds

to help prevent damage to the starter from over cranking in the case of a malfunctioning unit.

1) If engine starts on 2nd or 3rd attempt, see steps 4 & 5 above of "Successful Start".

2) If Third attempt fails to start engine, the system will turn off and doors will remain locked. NO FURTHER

ATTEMPTS WILL BE MADE AUTOMATICALLY

TURNING OFF A REMOTE STARTED ENGINE:

1) Engine is running in Remote Start (Parking lights are ON).

2) Press the Remote Start button again or for RS801 model, activate Green Start input wire.

3) Engine turns & parking lights OFF, Doors remain locked or will re-lock/re-arm if applicable.

CONVENIENCE AND SAFETY FEATURES

KEYLESS ENTRY (POWER DOOR LOCK CONTROL WITH RS800)

Thissystem enables youto remotelylock and unlockthe vehicle’s doors (if equippedwith power locks)through the

transmitter for safety and convenience. This feature may require extra labor and/or parts to install.

REMOTE LOCK / UNLOCK (RS-800 ONLY)

1) Press the Lock/Unlock button on the transmitter as you leave or come near the vehicle.

2) Parking lights will flash once for lock and twice for unlock. If vehicle is remote started, engine will remain

running and lights will flash but return to solid indicating engine is still being controlled by the remote starter.

NOTES: Doors lock automatically when vehicle is Remote Started. Starter Disable/Anti-grind is also

enabled/disabledwith thelock/unlock button. Ifan anti-grind/starterkill relayis installedon avehiclewithout power

door locks, the lock/unlock button of the remote control must still be used to operate the Starter disable.

VALET MODE / STARTER DISABLE OVERRIDE

Before servicing your vehicle or handing the keys over to a Valet we recommend putting the unit into valet mode.

The remote start function WILL NOT operate when in Valet mode. To enter Valet mode, turn the key to the ON

position, press and hold Program/Valet switch for 6 seconds. The LED will turn on solid and the system is now in

valet. Performthis procedureagain toexit ofValetmode. The keylessentry willstill functionnormally whilein valet

mode. In the event of a lost or broken transmitter, perform this step to override the Starter Disable (If installed).

CONVENIENCE AND SAFETY FEATURES

HOOD OPEN SAFETY SWITCH

Prevents the engine being Remote Started when hood is open and will abort a remote start if running. Eliminates

risk of injury to someone working under the hood of the vehicle. If a Remote Start is requested with the hood open,

the lights will flash twice, Ignition will not turn on, and the unit will not attempt a start.

BRAKE PEDAL RESET CIRCUITRY

Preventsstarting orshuts off aremote startedvehicle whenthiscircuit isactive oractivated. Prevents unauthorized

tampering. Thiscircuit shuts thesystem downimmediately when brakepedal ispressed if keyis notin ignition and

turned to the RUN position.

ANTI-GRIND / STARTER DISABLE

Prevents the driver from accidentally grinding the starter if the Ignition key is turned too far (to the start position)

while engine is already running from the remote starter. Starter circuit is automatically disabled when doors are

locked using remote (RS800 model only) as an added security feature.

NOTE:

Inthe eventof amajor malfunction,performing electricalservice orjumpstarting thevehicleyou shouldremove the

main Power Fuse(s) to protect the unit from possible damage.

TRANSMITTER PROGRAMMING (RS800ER ONLY)

TRANSMITTER PROGRAMMING:

Note: All transmitter codes must be learned at time of programming!! The RS800 allows storage of up to 4

different transmitter codes.

1. Open Hood.

2. Turn key to the ON position.

3. Press Programming button 4 times. After a few seconds, the unit will flash the parking lights 4 times.

4. Press button #1 of the transmitter to be coded. You should get 2 light flashes indicating the unit is waiting for a

2nd code, then press button #1 of a second transmitter, the unit will flash 3 times indicating its waiting for the 3rd

codeand 4flashes forthe 4th code. Ifall 4codes arelearned, theunit willautomaticallyexit codelearning mode,

otherwise turn key off and close hood.

CRIMESTOPPER SECURITY PRODUCTS, INC. 1770 SOUTH TAPO ST. SIMI VALLEY, CA. 93063

RS800 OPS REVA 08.01.00

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels CrimeStopper Démarreur à distance

CrimeStopper

CrimeStopper CS-9704 Manuel utilisateur

CrimeStopper

CrimeStopper RS-800.III Manuel utilisateur

CrimeStopper

CrimeStopper SP-400 Manuel utilisateur

CrimeStopper

CrimeStopper Cool Start RS-3 Manuel utilisateur

CrimeStopper

CrimeStopper Cool Start RS-7 Manuel utilisateur

CrimeStopper

CrimeStopper CS-2016DPII-FM Informer II Manuel utilisateur

CrimeStopper

CrimeStopper COOL START RS-900 Manuel utilisateur

CrimeStopper

CrimeStopper CS-865RKE II Series Manuel

CrimeStopper

CrimeStopper Ezee Start EZ-30DP Manuel utilisateur

CrimeStopper

CrimeStopper Ezee Start EZ-777 FM Manuel utilisateur

CrimeStopper

CrimeStopper EZEE Start EZ-45DP Manuel utilisateur

CrimeStopper

CrimeStopper REVO-1 Series Manuel utilisateur

CrimeStopper

CrimeStopper cool start RS2-G3 Manuel utilisateur

CrimeStopper

CrimeStopper Cool Start RS-1300DP Manuel utilisateur

CrimeStopper

CrimeStopper Cool Start RS-1405DP Manuel utilisateur

CrimeStopper

CrimeStopper RS-800.IV Manuel utilisateur

CrimeStopper

CrimeStopper EZ-45DP/55DP Manuel utilisateur

CrimeStopper

CrimeStopper Cool Start RS-00 Manuel utilisateur

CrimeStopper

CrimeStopper CoolStart RS900ER Manuel utilisateur

CrimeStopper

CrimeStopper Cool Start RS-1405DP Manuel utilisateur

CrimeStopper

CrimeStopper RS-901.II Manuel utilisateur

CrimeStopper

CrimeStopper RS700 IIIER Manuel utilisateur

CrimeStopper

CrimeStopper EZ-31DP/33DP/34DP Manuel utilisateur

CrimeStopper

CrimeStopper CoolStart RS900ER Manuel utilisateur

Manuels Démarreur à distance populaires d'autres marques

AstroStart

AstroStart 803U Manuel utilisateur

Durite

Durite 0-649-20 Manuel

EINHELL

EINHELL BT-PS 1000 Manuel

Linear

Linear ACCESS AK-21 Caractéristiques techniques

Soundstream

Soundstream TARANTULA RS.2 Manuel utilisateur

Jaycar Electronics

Jaycar Electronics MB3752 Manuel utilisateur

Ultra Start

Ultra Start 72 Series Manuel utilisateur

ADS

ADS FLASHLOGIC FLRSVW1 Manuel utilisateur

Selecta

Selecta JS012 Manuel utilisateur

Black Widow Security

Black Widow Security BW RAS 400 Manuel utilisateur

Vector

Vector Power City DK080706 Supplément

Code Alarm

Code Alarm CA-535 Manuel utilisateur

Ozito

Ozito OJS-800 Manuel utilisateur

Profi-Partner

Profi-Partner 46387 Manuel utilisateur

EZ STARTER

EZ STARTER EZ-45 Manuel utilisateur

Viper

Viper 4204 Manuel utilisateur

Essex Electronics

Essex Electronics KE-1701 Manuel utilisateur

EINHELL

EINHELL EGS 3600 Manuel