Crevavi Smarty CS-01 Manuel de service
Smarty
Quick Reference Guide
Version: 1.2
Page 2 of 16
1. Introduction..................................................................... 3
2. Product Functionality....................................................... 3
3. Warning ........................................................................... 5
4. Wiring .............................................................................. 6
5. Smarty App .................................................................... 12
5.1. Configuration:................................................................ 12
5.2. Operation....................................................................... 15
Download Smarty App
Page 3 of 16
1.Introduction
Crevavi Smarty –A smart switch to provide automation to
any and every house lighting applications. It can retrofit
into any of the existing switchboards and you can use your
smart phone to operate light or fan switches.
There are 2 parts in Smarty solution…
❖Smarty box fits inside most traditional switch boxes, and
attach to existing wiring.
❖Smarty app is to control the lights/fans that are
connected to the smarty box.
2.Product Functionality
❖Smarty-Box
▪Connects to switches, lights and fans (Connection
explained in section 3)
▪Takes input from mobile app, and switches on/off
the lights/fans, it also can regulate speed of fan on
the dedicated regulator port
▪It reads the physical switch status, and controls
light/fans based on that input too. All switches
connected to smarty, becomes 2-way switch.
Page 4 of 16
❖Smarty App
▪Home
•User can create “groups”, like Bedroom, Hall,
Kitchen, etc. Where multiple devices could be
connected to one/more which boards
•Once smarty is configured (process explained in
section 4.1), it shows the group on home screen
•Touch on a group connects to the smarty-boxes
(within proximity) configured for that group, and
app shows a control panel with switches
connected
▪Control Light/Fan
•Each connected switch shows their individual
status on screen
•On click, it changes the output state of the
switch, and once change is successful, updates
the status on screen
▪Manage
•Each smart-boxes need to be paired with the
app, and switches can be configured with a user-
friendly interface
•Icons and names for each group and switch are
configurable
Page 5 of 16
•Switches can be scheduled for ON/OFF at a
scheduled time, 3 schedules per switch can be
configured.
3.Warning
oAny work with AC mains must be done by trained
professional
oMain switch must be switched off before performing
any wiring
oInternal parts of the device conduct high voltage AC /
DC current. Under No circumstances user should open
the device housing
oElectrocution can cause Fatal injuries
Page 6 of 16
4.Wiring
Smarty box fits inside most traditional switch boxes, and
attach to existing wiring. There are three types of wires to
be connected
oLight/Fan outputs –on an existing switch-board
light/fan wires are connected to switches, remove them
from switch, and connect them to output terminal of
smarty.
oSwitch Inputs –Connect those switches to the input
wires
oLine and Neutral –power supply to the smarty box
Step-1: Switch off Mains, and make sure there is to power on
the Mains Line and Neutral
Step 1
Page 7 of 16
Step-2: Open the switch board, and note the connections
Step 2
Page 8 of 16
Step-3: Remove the light/fan wires from switch
Step 3
Page 9 of 16
Step-4: Connect these disconnected wires to smarty L1, L2, L3,
and R terminals
Step 4
Page 10 of 16
Step-5: Connect the switches to input S1, S2, S3, and F wire
Step 5
Table des matières
Autres manuels Crevavi Changer
