Crestron DM-NVX-E30 Manuel utilisateur

The Crestron DM-NVX-E30 is a network AV encoder that transmits ultra

high-definition 4K60 4:4:4 HDR video over standard Gigabit Ethernet to

a DM NVX® decoder. The DM-NVX-D30 is a network AV decoder that

receives ultra high-definition 4K60 4:4:4 HDR video from a DM NVX

encoder.

The DM-NVX-E30 provides a single HDMI® input, and the DM-NVX-D30

provides a single HDMI output. Both devices feature secure web-based

control and management, an analog audio output, and copper LAN

connectivity.

In the Box

1 DM-NVX-E30 or DM-NVX-D30

Additional Items

1 Connector, 4-Pin (2003576)

2 Connector, 5-Pin (2003577)

Install the Device

The DM-NVX-E30 and DM-NVX-D30 can be mounted onto a flat

surface or onto a rack rail.

Mounting onto a Flat Surface

Using four mounting screws (not included), mount the device onto a flat

surface such as a wall or the underside of a table. The screw diameter

should be no more than 6mm. Be sure to use the mounting hardware

that is appropriate for the surface to which the device is being mounted.

NOTE: Fan ventilation holes are provided on five sides of the device.

Ifthe installation necessitates that another object be positioned

flush against the ventilation holes on one side of the device, leave a

minimum clearance of 2 inches of space on all other sides containing

ventilation holes.

Wall Mounting (DM-NVX-E30 Shown)

DM-NVX-E30 and DM-NVX-D30 QuickStart

DM NVX® 4K60 4:4:4 HDR Network AV Encoder and Decoder

Mounting onto a Rack Rail

Using two rack mounting screws (not included), mount the left or right

mounting flange of the device onto the front or rear rail of a rack.

Rack Rail Mounting Example (DM-NVX-E30 Shown)

Connect the Device

Connect the device as required for the application.

NOTES:

lThe Ethernet port must be connected to a 1000BASE-T switch in

order to stream network video.

lThe DM-NVX-E30 and DM-NVX-D30 can be powered via the

Ethernet port, which is a PoE+ powered device (PD) port. In order

for the device to receive PoE+, the Ethernet port must be

connected to a PoE+ port of an Ethernet switch. Alternatively,

the DM-NVX-E30 and DM-NVX-D30 can be powered by a

24VDC power pack (sold separately).

DM-NVX-E30 and DM-NVX-D30 QuickStart

DM NVX® 4K60 4:4:4 HDR Network AV Encoder and Decoder

DM-NVX-E30 Front Panel Connections

DM-NVX-D30 Front Panel Connections

DM-NVX-E30 and DM-NVX-D30 QuickStart

DM NVX® 4K60 4:4:4 HDR Network AV Encoder and Decoder

DM-NVX-E30 and DM-NVX-D30 Rear Panel Connections

DM-NVX-E30 and DM-NVX-D30 QuickStart

DM NVX® 4K60 4:4:4 HDR Network AV Encoder and Decoder

AUDIO Connector Pin Assignments

The AUDIO connector uses a 5-pin terminal block for balanced or

unbalanced analog audio output.

AUDIO Connector

Refer to the following table and diagram for analog audio output pin

assignments and connection information.

Signal Name Balanced Audio Output Unbalanced Audio Output

+ L+ L+ Out

− L− Open

G Shield/ground Common ground

+ R+ R+ Out

− R− Open

Upgrade the Firmware

Before using the device, upgrade the firmware. The latest firmware can

be downloaded from the DM-NVX-E30 and DM-NVX-D30 product

pages on the Crestron website (www.crestron.com).

Configure the Device

Configure the device using the web interface. To access the web

interface, open a web browser and then go to the IP address of the

device.

NOTE: By default, the IP address of a DM NVX device is assigned by

a DHCP server on the network. If a DHCP server does not exist on

the network, the IP address defaults to a link-local address in the

169.254.

xxx

range (refer to RFC 3927 for detailed information

about link-local addressing). To display the IP address on the

connected display, press the SETUP button on the rear panel of

thedevice.

If no account has been created, create an account by entering a user

name and password and confirming the password. After an account is

created, sign in to the web interface by entering the user name and

password.

DM-NVX-E30 and DM-NVX-D30 QuickStart

DM NVX® 4K60 4:4:4 HDR Network AV Encoder and Decoder

Connect to the Cloud

The XiOCloud®service allows supported devices across an enterprise to

be managed and configured from one central and secure location in the

cloud. Supported Crestron® devices are configured to connect to the

service out of the box.

Use of the service requires a registered XiOCloud account. To register

for an XiOCloud account, refer to

www.crestron.com/Support/Tools/Licensing-Registration/XiO-Cloud-

Registration-Room-Licenses.

To connect the device to the XiOCloud service:

1. Record the MAC address and serial number that are labeled on the

shipping box or the device. The MAC address and serial number are

required to add the device to the XiOCloud service.

NOTE:If the device has multiple MAC addresses, use the MAC

address that is providing the primary connection back to the

network. For most devices, the Ethernet MAC address should be

used. However, if your device is connecting to the network over a

different protocol (such as Wi-Fi® communications), use the MAC

address for that protocol instead.

2. Log in to your XiOCloud account at portal.crestron.io.

3. Claim the device to the XiOCloud service as described in the

XiOCloudUserGuide.

Select the device from the cloud interface to view its status and

settings. The device may now also be managed and assigned to a group

or room. For more information, refer to the XiOCloudUserGuide.

NOTE:For XiOCloud accounts with room-based licenses, the device

must be added to a licensed room before its status and settings can

be viewed.

Observe the LED Indicators

Refer to the following table for information about the LED indicators on

the device.

LED Indicator Color Meaning

PWR Amber Power is being applied to the

device. Thedevice is booting.

Green Power is being applied to the

device. Thedevice is

operational.

SETUP Red The SETUP button is pressed.

NV Green (DM-NVX-E30 only) The

device is encoding

(transmitting) network video.

(DM-NVX-D30 only) The

device is decoding (receiving)

network video.

OL Green The device is online with a

control system via Ethernet.

Ethernet Green An Ethernet link is

established.

Flashing amber Data activity is occurring on

the Ethernet link.

HDMI INPUT

(DM-NVX-E30 only)

Green An HDMI signal is detected at

the HDMI input.

HDMI OUTPUT

(DM-NVX-D30 only)

Green An HDMI signal is being

transmitted at the HDMI

output.

DM-NVX-E30 and DM-NVX-D30 QuickStart

DM NVX® 4K60 4:4:4 HDR Network AV Encoder and Decoder

Visit the Product Page

Scan the QR code to visit the product page.

DM-NVX-E30

www.crestron.com/model/6511506

DM-NVX-D30

www.crestron.com/model/6511507

Additional Information

Original Instructions

The U.S. English version of this document is the original instructions.

All other languages are a translation of the original instructions.

Regulatory Model: M202013001

Crestron product development software is licensed to Crestron dealers and Crestron

Service Providers (CSPs) under a limited nonexclusive, nontransferable Software

Development Tools License Agreement. Crestron product operating system software is

licensed to Crestron dealers, CSPs, and end-users under a separate End-User License

Agreement. Both of these Agreements can be found on the Crestron website at

www.crestron.com/legal/software_license_agreement.

The product warranty can be found at www.crestron.com/warranty.

The specific patents that cover Crestron products are listed at

www.crestron.com/legal/patents.

Certain Crestron products contain open source software. For specific information, visit

www.crestron.com/opensource.

Crestron, the Crestron logo, DM NVX, and XiO Cloud are either trademarks or registered

trademarks of Crestron Electronics, Inc. in the United States and/or other countries. HDMI

and the HDMI logo are either trademarks or registered trademarks of HDMI Licensing LLC

in the United States and/or other countries. Wi-Fi is either a trademark or registered

trademark of Wi-Fi Alliance in the United States and/or other countries. Other

trademarks, registered trademarks, and trade names may be used in this document to

refer to either the entities claiming the marks and names or their products. Crestron

disclaims any proprietary interest in the marks and names of others. Crestron is not

responsible for errors in typography or photography.

Doc. 8906B

04/07/22

DM-NVX-E30 and DM-NVX-D30 QuickStart

DM NVX® 4K60 4:4:4 HDR Network AV Encoder and Decoder

Autres manuels pour DM-NVX-E30

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Crestron Convertisseur de média

Crestron

Crestron HD-CONV-USB-300 Manuel utilisateur

Crestron

Crestron DM-NVX-360 Manuel utilisateur

Crestron

Crestron DM-NVX-D80-IOAV Manuel utilisateur

Crestron

Crestron DigitalMedia DM-NVX-350 Manuel utilisateur

Crestron

Crestron DM-NVX-D80-IOAV Manuel utilisateur

Crestron

Crestron DigitalMedia DM-NVX-350C Manuel utilisateur

Crestron

Crestron DigitalMedia DM-NVX-350 Dessin dimensionnel

Crestron

Crestron DigitalMedia NVX Series Mode d’emploi

Crestron

Crestron DM-NVX-E10 Manuel utilisateur

Crestron

Crestron DM-DA4-4K-C Dessin dimensionnel

Crestron

Crestron HD-CONV-USB-200 Manuel utilisateur

Crestron

Crestron RCA Analog Video Input Card w/Analog Audio... Manuel utilisateur

Crestron

Crestron DigitalMedia DM-NVX-350 Manuel utilisateur

Crestron

Crestron DigitalMedia DM-NVX-350C Dessin dimensionnel

Crestron

Crestron DigitalMedia DM-NVX-351 Manuel utilisateur

Crestron

Crestron DM-NAX-16AIN Manuel utilisateur

Crestron

Crestron DM-NVX-E20-2G-B-T Manuel utilisateur

Crestron

Crestron DM-NVX-E30 Manuel utilisateur

Crestron

Crestron DM-NVX-D200 Manuel utilisateur

Crestron

Crestron C2N-MMS-SC Comment utiliser

Crestron

Crestron DigitalMedia DM-NVX-350 Manuel utilisateur

Crestron

Crestron DM-RMC-SCALER-C Manuel utilisateur

Crestron

Crestron HD-PS401 Manuel utilisateur

Crestron

Crestron UC-BRKT-200-S-Z-ASSY Manuel utilisateur

Manuels Convertisseur de média populaires d'autres marques

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuel utilisateur

SPROLINK

SPROLINK VA1 Manuel utilisateur

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuel utilisateur

Nikon

Nikon AF-S TC-20E III Manuel utilisateur

Axis

Axis AXIS Q7406 Manuel utilisateur

Omega

Omega TAC80B-J Manuel utilisateur

Zoom

Zoom Thunderbolt TAC-2R Manuel utilisateur

OST

OST iConverter 10/100M Manuel utilisateur

Vertiv

Vertiv Netsure Manuel utilisateur

birddog

birddog MINI Manuel utilisateur

Roland

Roland GI-10 Manuel utilisateur

Wallenstein

Wallenstein WX310 Manuel utilisateur

Pace

Pace MSS 200-1 Manuel utilisateur

Solar Converters

Solar Converters EQ 12/24-50 Manuel utilisateur

CYP

CYP EL-7400V Manuel utilisateur

TIE

TIE MIDI 1i1o Manuel utilisateur

DCS

DCS Vivaldi Upsampler Manuel utilisateur

Westermo

Westermo MCW-211 SERIES Manuel utilisateur