Cranborne THI 10-50c Guide de l'utilisateur

HAMWORTHY HEATING LTD CRANBORNE THI 10-50c 500001115/B

Cranborne THI 10-50c

Wall Hung Gas Fired Condensing Boiler

Room Sealed or Open Flue

INSTALLATION, COMMISSIONING AND SERVICING

INSTRUCTIONS

IMPORTANT NOTE: THESE INSTRUCTIONS MUST BE READ AND UNDERSTOOD

BEFORE INSTALLING, COMMISSIONING, OPERATING OR SERVICING THIS

APPLIANCE.

THE CRANBORNE THI 10-50c BOILER IS INTENDED FOR USE AS A DOMESTIC /

LIGHT COMMERCIAL APPLIANCE FOR HEATING AND DOMESTIC HOT WATER

INSTALLATIONS.

THIS BOILER IS FOR USE ON GROUP H NATURAL GAS (2ND FAMILY) I2H OR LPG-

PROPANE GAS (3rd FAMILY) I3P. PLEASE ENSURE RELEVANT INFORMATION

REQUIRED WITHIN DOCUMENT IS FOUND RELATING TO SPECIFIC GAS TO BE

FIRED BEFORE FIRING BOILER.

THIS BOILER COMPLIES WITH ALL RELEVANT EUROPEAN DIRECTIVES

EC IDENTIFICATION No. CE-0085AR0323

PUBLICATION NO. 500001115

ISSUE 'B'

AUGUST 2003

- 2 -

CONTENTS

I-PRESENTATION ................................................................................................................................... 5

1-DESCRIPTION ...................................................................................................................................... 5

2-RANGE .................................................................................................................................................. 5

II - TECHNICAL SPECIFICATIONS ........................................................................................................... 6

1-CHARACTERISTICS............................................................................................................................. 6

2-PIPE CONNECTION DIAMETERS........................................................................................................ 7

3-DIMENSIONS ........................................................................................................................................ 7

4-LIST OF COMPONENTS....................................................................................................................... 8

4.1 - Control panel ............................................................................................................................. 9

5-CIRCULATING PUMP CHARACTERISTICS ...................................................................................... 10

6-PRESSURE DROP IN THE BOILER (HEATING CIRCUIT)................................................................ 10

7-THERMAL EFFICIENCY ..................................................................................................................... 10

III - OPERATION ........................................................................................................................................ 12

1-GENERAL OPERATING PRINCIPLE.................................................................................................. 12

2-OPERATION OF THE LMU MANAGEMENT UNIT............................................................................. 13

2.1 - Normal operating conditions ....................................................................................................13

2.2 - Operating diagram ................................................................................................................... 13

2.3 - Principle of air/gas servo-control system ................................................................................. 15

2.4 - Air pressure variation procedure ............................................................................................. 15

2.5 - Emission of pollutants .............................................................................................................. 15

3-FUNCTIONS........................................................................................................................................ 16

3.1 - Anti-freeze function .................................................................................................................. 16

3.2 - Anti-legionnella function .......................................................................................................... 16

3.3 - Pump run-on after the end of heating ...................................................................................... 16

3.4 - Pump kick or selector valve kick .............................................................................................. 16

3.5 - Boiler overheat protection ........................................................................................................ 16

3.6 - Monitoring of flue gas temperature .......................................................................................... 17

3.7 - Boiler return temperature control ............................................................................................. 17

3.8 - Monitoring of hydraulic pressure ............................................................................................. 17

3.9 - Anti-short burner cycle protection function .............................................................................. 17

3.10 - Cleaning function ..................................................................................................................... 17

3.11 - Regulator shutdown function ................................................................................................... 17

3.12 - LMU programmable key .......................................................................................................... 18

3.13 - Automatic summer/winter switching (only activated with outside sensor) ............................... 18

4-DIFFERENT VERSIONS OF THE THI ................................................................................................ 19

4.1 - THI basic model (without outside sensor, without room sensor) ............................................. 19

4.2 - THI with outside sensor only ...................................................................................................19

4.3 - THI with outside and room sensors ......................................................................................... 22

- 3 -

CONTENT

IV - INSTALLATION ................................................................................................................................... 23

1-GENERAL............................................................................................................................................ 23

2-VENTILATION ..................................................................................................................................... 24

2.1 - THI models with conventional flue connection ........................................................................ 24

2.2 - THI models with balanced flue connection .............................................................................. 24

3-COMBUSTION PRODUCT FLUEING ................................................................................................. 25

3.1 - Conventional flue outlets (B23 model) ..................................................................................... 25

3.2 - Balanced flue outlet ................................................................................................................. 26

4-SUPPORT BRACKET.......................................................................................................................... 32

5-HYDRAULIC CONNECTION ............................................................................................................... 33

5.1-Recommendations................................................................................................................... 33

5.2 - Accessories to connect, install or adjust .................................................................................. 33

5.3 - Under-floor recommendations ................................................................................................. 34

5.4 - Heat exchanger flow rate ......................................................................................................... 34

5.5 - Hydraulic connection for models THI 10-50 C ......................................................................... 35

5.6 - Hydraulic connection for models THI 10-50 C + DHW production system of type BS ............ 35

6-GAS CONNECTION ............................................................................................................................ 36

6.1 - Connection of a gas safety solenoid ........................................................................................ 36

7-ELECTRICAL CONNECTION.............................................................................................................. 36

7.1 - Mains connection ..................................................................................................................... 36

7.2 - Connection of the sensors to the LMU management unit ....................................................... 36

7.3 - Under-floor heating safety ....................................................................................................... 36

7.4 - Wiring diagram ........................................................................................................................ 37

V-SETTINGS OF THE INSTALLATION TYPES ..................................................................................... 38

1-SINGLE CIRCUIT ................................................................................................................................ 38

1.1 - Heating pump relay operation ................................................................................................. 39

1.2 - Hydraulically disconnected operation ...................................................................................... 39

2-DOUBLE CIRCUIT............................................................................................................................... 40

2.1 - Heating pump relay operation ................................................................................................. 41

2.2 - Without room sensor ............................................................................................................... 41

2.3 - With room sensor .................................................................................................................... 41

2.4 - Recommended installation of the 2nd circuit and relay clip-ins on the LMU ........................... 42

3-ACCESS THE SETTINGS VIA THE QAA 73 ROOM SENSOR ......................................................... 43

3.1 - Access the lines 51 to 98 ......................................................................................................... 43

3.2 - Access the lines 501 to 755 ..................................................................................................... 44

VI - COMMISSIONING ............................................................................................................................... 45

1-PROTECTION OF THE INSTALLATION............................................................................................. 45

1.1 - Bionibal .................................................................................................................................... 45

1.2 - Bionibagel ................................................................................................................................ 45

2-FILLING THE INSTALLATION WITH WATER .................................................................................... 46

3-PRESSURE SENSOR......................................................................................................................... 46

4-GAS SUPPLY ...................................................................................................................................... 46

5-SETTING THE MAXIMUM POWER IN HEATING MODE................................................................... 47

6-VERIFICATIONS PRIOR TO COMMISSIONING................................................................................ 47

7-USER INFORMATION......................................................................................................................... 47

8-COMMISSIONING............................................................................................................................... 48

9-FLAME SETTING ................................................................................................................................ 49

10 - COMBUSTION PRODUCT CHECKING.............................................................................................. 49

- 4 -

CONTENT

VII - GAS CONVERSION ............................................................................................................................ 50

1-SERVICE PRESSURE CONTROL...................................................................................................... 50

2-GAS CONVERSION ............................................................................................................................ 50

2.1 - Conversion from Natural Gas to Propane ............................................................................... 51

2.2 - Conversion from Propane to Natural gas ................................................................................ 51

3-GAS/CO2/CO/NOX FLOW CONTROL................................................................................................ 52

3.1 - Surveillance procedure ............................................................................................................ 52

3.2 - Setting table ............................................................................................................................. 53

VIII - MAINTENANCE .................................................................................................................................. 54

1-SERVICING THE FAN AND THE BURNER........................................................................................ 54

2-SERVICING THE HEAT EXCHANGER OF THE BOILER SHELL...................................................... 55

3-CHECKING ACCESSORIES............................................................................................................... 55

4-EXPANSION VESSEL PRE-INFLATION PRESSURE CHECK .......................................................... 55

5-COMBUSTION PRODUCT CONDUITS.............................................................................................. 55

6-DRAINING ........................................................................................................................................... 56

7-SENSOR RESISTANCES ................................................................................................................... 56

IX - OPERATING FAULTS ........................................................................................................................ 57

X-OPTIONS ............................................................................................................................................. 59

1-SET-UP TAKING ROOM TEMPERATURE INTO ACCOUNT (REG 73) ............................................ 59

2-CLIP-IN LPB KIT (REG 130)............................................................................................................... 59

3-SECONDARY CIRCUIT CLIP-IN KIT ................................................................................................. 59

4-DOUBLE CIRCUIT KIT (REG 126)...................................................................................................... 60

5-PROGRAMMABLE RELAY CLIP-IN KIT (REG 127)........................................................................... 60

6-CONTROL UNIT ZHTI 46 (REG 129).................................................................................................. 60

7-CONTROL UNIT ZHTI 47 (REG 128).................................................................................................. 61

9-SELECTOR VALVE KIT FOR CONNECTING THI..C/BS ................................................................... 61

XII - NOMENCLATURE .............................................................................................................................. 64

- 5 -

I - PRESENTATION

1 - DESCRIPTION

Standard description: wall mounted condensation

boiler for hot water heating, sealed combustion cir-

cuit, pre-mixing burner with air-gas supply, and

linear power modulation connecting combustion

product types B23, C13, C33, following EN 483

(04/00)

The THI boiler is pre-set in the factory for natural

gas H (G20) or propane (G31) depending on the

model.

This boiler comprises all the necessary accessories

for the correct working of a water based central hea-

ting circuit specifically:

- one boiler comprising:

• a high performance double walled condensa-

tion exchanger,

- a pre-mixing burner, with stainless steel refracto-

ry grate,

- a variable speed 230 Volt fan controlled by the re-

gulator,

- a 230 Volt two way gas valve controlled by the air

pressure,

- electronic regulation which ensures power modu-

lation depending on the demands for heating or

DHW (LMU control unit),

- an outside sensor,

- a circulating pump,

- a 3 bar safety-valve,

-a gasconversion set (to propane from natural gas).

OPTIONAL:

- Horizontal flue kit (C13) allowing the boiler to be

connected to a straight horizontal flue.

- Accessories for horizontal connection of the boi-

ler (C13) - (extensions, elbows etc.).

- Flue adapter (C33) allowing the boiler to be con-

nected to a vertical flue.

- Accessories for vertical connection of the boiler

(C33) - (terminal, extensions, elbows etc.).

- Adjustment as a function of the room temperature

(REG 73).

- 2nd heating circuit kit allowing the connection of

a secondary heating circuit (REG 126).

- Clip-in kit secondary circuit allowing the connec-

tion of a secondary heating circuit.

- Clip-in communication LPB kit used for cascade

or multi-circuit installations (REG 130).

- Clip-in programmable relay kit allowing a secon-

dary pump to work in parallel (REG 127).

- Control unit ZHTi 46 (REG 129) controlling an ad-

ditional heating circuit.

- Control unit ZHTi 47 (REG 128) allowing cascade

management for two boilers.

- Domestic hot water production system (type BS).

2 - RANGE

Models Functions Combustion products

connection

THI 10-50 C Only heating

Chimney conduit (B23)

Horizontal flue (C13)

Vertical flue (C33)

- 6 -

II - TECHNICAL SPECIFICATIONS

1 - CHARACTERISTICS

ModelTHI10-50 C

Certification CE0085AR0323

Category / Country of destination: GB II2H3P

Nominal power 30/50 °C

60/80 °C kW

kW 10,7/52,6

9,7/48,7

Heat rate kW 10,0/50,0

Efficiency on PCI 30/50 °C

60/80 °C %

%107,7/105,1

97,4/95,9

Efficiency on PCS 30/50 °C

60/80 °C %

%96,9/94,6

87,7/86,3

Efficiency according to 92/42 CEE directive (30%) load %107,7

Useable gases (NG:Natural gas / PG:Propane) NGH -PG

Combustion product temperaturemaxi°C

Over-heating safety of combustion products °C 85

Flow rate of combustion products mini/maxi kg/h 18,0/90,0

Permitted back pressure (C13)maxi Pa 100

Air flow required for combustion m3/h 61

NOx

mg/kWh

<60

mg/kWh

<50

Heating service pressure mini/maxi bar 1/3

Heating circuit water temperature maxi °C 80

Water overheating safety thermostat °C 100

Boiler water capacity liter 3,8

Primary water flow 60/80 °C m3/h 2,1

DP water (at nominal flow) mbar 600

Thermal losses (DT 30 K) W100

Absorbed electrical power in heating mode:

Control alone W

mini:23

maxi:53

Pump speed 1 W110

Pump speed 2 W124

Pump speed 3 W147

Stand By Position W9,2

Power supply/frequency 230 V (+ 10%, - 15%)/50 Hz

Protection factor

models B23

model C13/C33

IP 24

IP 44

Weight packaged kg 80

- 7 -

TECHNICAL SPECIFICATIONS

2 - PIPE CONNECTION DIAMETERS

3 - DIMENSIONS

Modèles THI 10-50 C

ÆCombustion products B23 mm 80/139

ÆCombustion products C13

C33

mm 80/125

ÆGasinletR1

ÆHeatingflow/return R1

ÆCondensation outlet mm 25

ÆSafetyvalve outlet R3/4

ÆDHW production system connection (option § 9 - page 61)

R3/4 with coupling

55,5

45,5 117 56 323,5

361

102

765

120 67,5

495

760

cd i

THI-05-0

Legend:

a : Combustion products outlet

b : Gas inlet

c : Heating flow

d : Heating return

e : /

f : /

g : Condensate drain

h : Safety valve drain

i : DHW production system connection (option)

Bottom view

Rear view

Fig. 1

- 8 -

TECHNICAL SPECIFICATIONS

4 - LIST OF COMPONENTS

104

13 313

6 8

2022

119

THI-06-0

1) Gas inlet

2) Gas unit (solenoids and regulator) 230 V

3) Gas burner

4) Combustion products outlet

5) Flue gas sensor

6) Heating flow

7) Heating outlet and safety sensor

8) Heating return manifold

9) Boiler return sensor

10)Ignition transformer 230 V

11) Fan 230 V

12) Boiler shell

13) Sight-glass

14) Microprocessor control panel

15)3 speed pump 230 V

16) Air bleed

17) Pressure sensor

18) Filter and drain tap

19) Safety valve 3 bar

20) Safety valve outlet

21) Siphon trap

22) Condensate drain

23) Combustion check window

24)DHW production system connection (option)

Fig. 2

- 9 -

TECHNICAL SPECIFICATIONS

4.1 - Control panel

THI Without room sensor or outside sensor

The heating (2) and hot water (3) temperatures set-

ting are manually set on the boiler control panel.

- The FUNCTION key (1) gives access to 2 opera-

ting modes:

• Auto mode operation (4): no access

• Winter mode operation: LED (5) on

• Summer mode operation: LED (5) off

THI Without room sensor and with outside sensor

Possibility of correcting the heating temperature (2)

computed automatically using the outside tempera-

ture and manual setting of the hot water temperatu-

re (3) on the boiler control panel. (The room

temperature setting can be changed by + or - 3°C

maximum according to the setting).

- The FUNCTION key (1) gives access to 3 opera-

ting modes:

• Auto mode function:

auto winter = Leds (4) and (5) on

auto summer = Led (4) on + Led (5) off

• Winter mode operation: LED (5) on

• Summer mode operation: LEDs (4) and (5) off

THI With room sensor and outside sensor

Fitting the QAA73 room sensor cancels the func-

tions of the heating temperature setting (2) and hot

water setting (3) on the boiler control panel. All the

temperatures required, together with the heating

programmes, are set on the QAA 73 (refer to the

sensor instructions).

bar

auto

Function

Info

°C

Reset

THI-01-0

1112

Fig. 3

1) The "Function" key gives access to 3 operating

modes by simply pressing the key:

auto mode: LED (4) on

winter mode: LED (5) on

summer mode: LED (4) and (5) off

2) Regulation of the heating temperature (setting

read on the display (13)) *

3) Regulation of the DHW temperature (setting

read on the display (13)) *

6) Maintenance key: reserved for servicemen or

maitenance (see overleaf)

7) "Info" key gives access to 5 types of information

on the display (13) by simply pressing the key:

Boiler outlet temperature: LED (9) on

Sensor temperature: LED (9) flashing

Boiler water pressure: LED (8) on

Operating phase: LEDs (8/9) off

Diagnostics: LEDs (8/9) off/

Display (13) flashing

10) Boiler reset button (After each reset, wait for

about 30 seconds before the restart = reset)

11) Alarm: Red LED on

12) Flame indicator: Green LED on

13) Digital display: Alternatively displays the setting

selected by the "Info" key and the current default

code

14) ON/OFF switch (depending on the models) **

*The function of the heating temperature (2) and DHW temperature (3)

potentiometers differs according the 3 examples below.

**The On/Off switch (after initial lighting) should be maintained in the "ON"

position in order to preserve all the automatic functions of the boiler (an-

ti-freeze, anti-legionella functions, etc).

- 10 -

TECHNICAL SPECIFICATIONS

5 - CIRCULATING PUMP CHARACTERISTICS

The boiler’s integrated circulating pump is equipped

with a 3 speed motor (refer to section 1 - page 6).

Electrical consumption of the heating circulating

pump can be optimised by adapting its speed to the

needs of the installation.

6 - PRESSURE DROP IN THE BOILER (HEATING CIRCUIT)

7 - THERMAL EFFICIENCY

Fig. 4 UPS 25-80-180

Fig. 5

0 500 1000 1500 2000

Flow rate (dm3/h)

Pressuredrop (mWG)

0,90

0,92

0,94

0,96

0,98

1,00

1,02

1,04

1,06

1,08

1,10

20 30 40 50 60 70

T50-03-3

PCI efficiency

Installation- empératurereturn t

Minimum rate

Maximum rate

Fig. 6

Table des matières

Autres manuels Cranborne Chaudière

Cranborne

Cranborne THI 5-25c Guide de l'utilisateur

Manuels Chaudière populaires d'autres marques

Vaillant

Vaillant uniSTOR VIH SW GB 500 BES Manuel utilisateur

Radijator

Radijator BIO max 23.1 Manuel utilisateur

Brunner

Brunner BSV 20 Manuel utilisateur

Buderus

Buderus Logamax GB062-24 KDE H V2 Manuel utilisateur

Potterton

Potterton 50e Fiche technique

UTICA BOILERS

UTICA BOILERS TriFire Manuel utilisateur

Joannes

Joannes LADY Series Manuel

ECR International

ECR International UB90-125 Manuel d'instructions

Froling

Froling FHG Turbo 3000 Manuel utilisateur

Froling

Froling P4 Pellet 8 - 105 Manuel utilisateur

U.S. Boiler Company

U.S. Boiler Company K2 Manuel utilisateur

Henrad

Henrad C95 FF Manuel utilisateur

NeOvo

NeOvo EcoNox EF 36 Manuel utilisateur

Potterton

Potterton PROMAX SL 12 Manuel utilisateur

Eco Hometec

Eco Hometec EC 25 COMPACT Manuel utilisateur

Viessmann

Viessmann VITODENS 200 Mode d’emploi

Baxi

Baxi Prime 1.24 Manuel utilisateur

REXNOVA

REXNOVA ISA 20 BITHERMAL Manuel utilisateur