Craftsman NEXTEC 320.33179 Manuel utilisateur

Owner's Manual

I€:RnI:TSMnN°I

gEXTEC

12.0-VOLT LITHIUM-ION

MINI PALM JIG SAW

Model No. 320.33179

ENERGYSTAR_'_

qualified battery

charger for a

better environment

_, WARNING: To reduce the risk of injury, the

user must read and understand the Operator's

manual before using this product.

Charge battery before first use.

c os

LISTED

Warranty

Safety

Assembly

Operation

Maintenance

Espa_ol

Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A.

www.craftsman.com

Warranty page 2

Safety Symbols pages 3-5

Safety instructions pages 6-9

Description pages 9-11

Assembly page 11

Operation pages 11-19

Maintenance pages 19-20

Troubleshooting page 20

Parts List pages 21-23

CRAFTSMAN ONE YEAR LIMITED WARRANTY

FOR ONE YEAR from the date of purchase, this product is warranted against any

defects in material or workmanship. With proof of purchase, defective product will

be replaced free of charge.

For warranty coverage details to obtain free replacement, visit the web site:

www.craftsman.com

This warranty does not cover the blade, which is an expendable part that can wear

out from normal use within the warranty period.

This warranty is void if this product is ever used while providing commercial

services or if rented to another person.

This warranty gives you specific legal rights, and you may also have other rights

which vary from state to state.

Sears Brands Management Corporation, Hoffman Estates, IL 60179

This cordless jig saw has many features for making its use more pleasant and

enjoyable. Safety, performance, and dependability have been given top

priority in the design of this product making it easy to maintain and operate.

SAVE THESE INSTRUCTIONS!

READ ALL INSTRUCTIONS!

Page 2 33179 Manual_Revised_12 0208

,_, DANGER: People with electronic devices, such as pacemakers, should

consult their physician(s) before using this product. Operation of electrical

equipment in close proximity to a heart pacemaker could cause interference or

failure of the pacemaker.

,_ WARNING: Some dust created by power sanding, sawing, grinding, drilling

and other construction activities contains chemicals known to the state of

California to cause cancer, birth defects or other reproductive harm. Some

examples of these chemicals are:

• Lead from lead-based paints,

• Crystalline silica from bricks and cement and other masonry products, and

• Arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type

of work. To reduce your exposure to these chemical: work in a welt ventilated

area, and work with approved safety equipment, such as those dust masks that

are specially designed to filter out microscopic particles.

The purpose of safety symbols is to attract your attention to possible dangers. The

safety symbols and the explanations with them deserve your careful attention and

understanding. The symbol warnings do not, by themselves, eliminate any danger.

The instructions and warnings they give are no substitutes for proper accident

prevention measures.

_, WARNING: Be sure to read and understand all safety instructions in this manual,

including all safety alert symbols such as "DANGER," "WARNING," and "CAUTION"

before using this tool. Failure to following all instructions listed below may result in

electric shock, fire, and/or serious personal injury.

SYMBOL MEANING

SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, OR CAUTION. May be

used in conjunction with other symbols or pictographs.

,_ DANGER: Indicates an imminently hazardous situation, which, if not avoided, will

result in death or serious injury.

_, WARNING: Indicates a potentially hazardous situation, which, if not avoided,

could result in death or serious injury.

,_ CAUTION: Indicates a potentially hazardous situation, which, if not avoided, could

result in minor or moderate injury.

33179 ManuaLRevised_12 0208 Page 3

Damage Prevention and Information Messages

These inform the user of important information and/or instructions that could lead to

equipment or other property damage if they are not followed. Each message is

preceded by the word "NOTICE," as in the example below:

NOTICE: Equipment and/or property damage may result if these instructions are not

followed.

_, WARNING: To ensure safety and reliability, all repairs should be performed by a

qualified service technician.

O_, WARNING: The operation of any power tools can result inforeign

objects being thrown into your eyes, which can result in severe eye

damage. Before beginning power tool operation, always wear safety

goggles or safety glasses with side shield and a full face shield when

needed. We recommend a Wide Vision Safety Mask for use over eye-

glasses or standard safety glasses with side shields. Always use eye

protection which is marked to comply with ANSI Z87.1.

Page 4 33179 Manual_Revised_12 0208

SAVE THESE INSTRUCTIONS

Some of the following symbols may be used on this tool. Please study them and

learn their meaning. Proper interpretation of these symbols will allow you to

operate the tool better and more safely.

SYMBOL NAME DESIGNATION/EXPLANATION

V Volts Voltage

A Amperes Current

Hz Hertz Frequency (cycles per second)

W Watt Power

min Minutes Time

Alternating Current Type of current

---== Direct Current Type or a characteristic of current

n o No Load Speed Rotational speed, at no load

] Class II Construction Double-insulated construction

.../min Per Minute Revolutions, strokes, surface speed,

orbits, etc., per minute

Wet Conditions Alert Do not expose to rain or use in damp

locations.

To reduce the risk of injury, user must

Read The Operator's Manual read and understand operator's manual

before using this product.

OAlways wear safety goggles or safety

Eye Protection glasses with side shields and a full face

shield when operating this product.

,_. Alert Precautions that involve

Safety your safety.

No Hands Symbol Failure to keep your hands away from theblade wil! result in serious personal injury.

No Hands Failure to keep your hands away from the

Symbol blade wil! result in serious personal injury.

No Hands Failure to keep your hands away from the

Symbol blade wil! result in serious personal injury.

No Hands Symbol Failure to keep your hands away from the

blade wil! result in serious personal injury.

Hot Surface To reduce the risk of injury or damage,avoid contact with any hot surface.

33179 Manual_Revised_12 0208 Page 5

GENERAL POWER TOOL SAFETY WARNINGS

_, WARNING: Read and understand all instructions. Failure to follow all

instructions listed below may result in electric shock, fire, and/or serious personal

injury.

Save all warnings and instructions for future reference.

The term "power tool" in all warnings listed below refers to corded power tools and

battery-operated (cordless) power tools.

WORK AREA SAFETY

•Keep your work area clean and well lit. Cluttered or dark areas invite

accidents.

Do not operate power tools in explosive environments, such as in the

presence of flammable liquids, gases, or dust. Power tools create sparks,

which may ignite the dust or fumes.

Keep children and bystanders away while operating a power tool.

Distractions may cause you to lose control.

ELECTRICAL SAFETY

Power tool plugs must match the outlet. Never modify the plug in any way.

Do not use any adapter plugs with grounded power tools. Unmodified plugs

and matching outlets will reduce the risk of electric shock.

Avoid body contact with grounded surfaces, such as pipes, radiators,

ranges, and refrigerators. There is an increased risk of electric shock if your

body is grounded.

Do not expose power tools to rain or wet conditions. Water entering a power

tool will increase the risk of electric shock.

Do not abuse the cord. Never use the cord for carrying, pulling, or

unplugging the power tool. Keep the cord away from heat, oil, sharp edges,

or moving parts. Damaged or entangled cords increase the risk of electric

shock.

•When operating a power tool outdoors, use an extension cord suitable for

outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric

shock.

•If operating a power tool in a damp location is unavoidable, use a ground

fault circuit interrupter (GFCI) protected supply. Use of a (GFCI) reduces the

risk of electric shock.

Page 6 33179 ManuaLRevised_12 0208

PERSONAL SAFETY

Stay alert, watch what you are doing and use common sense when

operating a power tool. Do not use the tool while tired or under the

influence of drugs, alcohol, or medication. A moment of inattention while

operating power tools may result in serious personal injury.

Use personal protective equipment. Always wear eye protection.

Protective equipment such as dust mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate conditions will reduce personal injuries.

Prevent unintentional starting. Ensure that the switch is in the OFF-position

before connecting to a power source and/or battery, picking up or carrying

the tool. Carrying power tools with your finger on the switch or energizing power

tools that have the switch on invites accidents.

Remove any adjusting key or wrench before turning the power tool on. A

wrench or a key left attached to a rotating part of the power tool may result in

personal injury.

Do not overreach. Keep proper footing and balance at all times. This

enables better control of the power tool in unexpected situations.

Dress properly. Do not wear loose clothing or jewelry. Keep your hair,

clothing and gloves away from moving parts. Loose clothes, jewelry or long

hair can be caught in moving parts.

If devices are provided for the connection of dust extraction and collection

facilities, ensure that these are connected and properly used. Use of these

devices can reduce dust-related hazards.

POWER TOOL USE AND CARE

Do not force the power tool. Use the correct power tool for your

application. The correct power tool will do the job better and more safely at the

rate for which it was designed.

Do not use the power tool if the switch does not turn it on and off. Any

power tool that cannot be controlled with the switch is dangerous and must be

repaired.

Disconnect the plug from the power source and/or the battery from the

power tool before making any adjustments, changing accessories, or

storing power tools. Such preventive safety measures reduce the risk of

starting the power tool accidentally.

Store idle power tools out of the reach of children and do not allow persons

unfamiliar with the power tool or these instructions to operate the power

tool. Power tools are dangerous in the hands of untrained users.

Maintain power tools. Check for misalignment or binding of moving parts,

breakage of parts and any other condition that may affect the power tool

operation. If damaged, have the power tool repaired before use. Many

accidents are caused by poorly maintained power tools.

33179 ManuaLRevised_12 0208 Page 7

Keep cutting tools sharp and clean. Properly maintained cutting tools with

sharp cutting edges are less likely to bind and are easier to control.

Use the power tool, accessories, tool blades, etc., in accordance with these

instructions, taking into account the working conditions and the work to

be performed. Use of the power tool for operations different from those intended

could result in a hazardous situation.

BATTERY TOOL USE AND CARE

•Recharge only with the charger specified by the manufacturer. A charger

that is suitable for one type of battery pack may create a risk of fire when used

with another battery pack.

• Use power tools only with specifically designated battery packs. Use of any

other battery packs may create a risk of injury and fire.

• Use only the battery pack and chargers listed below:

BATTERY PACK CHARGERS

320.10006

320.11221 320.14300

320.29497

When the battery pack is not in use, keep it away from other metal objects,

such as paper clips, coins, keys, nails screws, or other small metal objects

that can make a connection from one terminal to another. Shorting the

battery terminals together may cause burns or a fire.

Under abusive conditions, liquid may be ejected from the battery; avoid

contact. If contact accidentally occurs, flush with water. If liquid contacts

eyes, also seek medical help. Liquid ejected from the battery may cause

irritation or burns.

SERVICE

•Have your power tool serviced by a qualified repair person using only

identical replacement parts. This will ensure that the safety of the power tool is

maintained.

•Follow instructions in the Maintenance section of this manual. Use of parts

not listed in this manual or failure to follow Maintenance instructions may create a

risk of shock or injury.

Page 8 33179 Manual_Revised_12 0208

SPECIFIC SAFETY RULES FOR CORDLESS JIG SAW

Hold power tools by their insulated gripping surfaces when performing an

operation where the cutting tool may contact hidden wiring or its own cord.

Contact with a "live" wire will also make exposed metal parts of the tool "live" and

shock the operator.

Use clamps or other practical way to support and secure the workpiece to a

stable platform. Holding the work by hand or against your body is unstable and

may lead to loss of control.

KNOW YOUR CORDLESS JIG SAW (Fig. 1)

Palm grip

LED Worklight

Lock ON/OFF Button

Variable-speed dial

Steel base "f FuelGauge

Power switch

33179 ManuaLRevised_12 0208 Page 9

PRODUCT SPECIFICATIONS

Motor 12 Volt DC

No-Load Speed 1400 - 2400SPM

Length of Stroke 5/8 inch (16mm)

Blade Type T shank

Tool Weight (without battery) 1.84 lbs.

Battery Type Lithium-Ion

Battery Voltage 12 Volt DC

Charger Input 120-Volts, 60Hz AC only

Optimum Charging Temperature 32°F (0°C) and 104°F (40°C)

_i, WARNING: The safe use of this product requires an understanding of the

information on the tool and in this operator's manual as welt as knowledge of the

project you are attempting. Before use of this product, familiarize yourself with all

operating features and safety rules.

TOOL-LESS BLADE CLAMP

The blade clamp design does not require the use of a tool (such as a blade wrench)

when installing or removing the blade.

VARIABLE-SPEED DIAL

The variable-speed dial is located on the side of your tool and is for selecting the

appropriate speed. This allows maximum control for a wide variety of applications.

LED WORKLIGHT

The LED worklight is located above the tool-less blade. This feature provides extra

light for increased visibility.

LOCK ON/OFF BUTTON

The button can lock the tool off to reduce accidental starting and can lock the tool on

for continuous operation.

FUELGAUGE

The FuelGauge indicates the battery-pack charge level.

BLOWER

The jig saw is equipped with a blower for removing dust and chips to help keep the

cutting line clear.

Page 10 33179 ManuaLRevised_12 0208

Table des matières

Langues :

Autres manuels Craftsman Outils électriques

Craftsman

Craftsman CMCN618N Manuel utilisateur

Craftsman

Craftsman 320.17543 Manuel utilisateur

Craftsman

Craftsman Hammerhead 320.38600 Manuel utilisateur

Craftsman

Craftsman 351.217620 Manuel utilisateur

Craftsman

Craftsman 103.20620 Manuel utilisateur

Craftsman

Craftsman 124.47747 Manuel utilisateur

Craftsman

Craftsman 328.12190 Manuel utilisateur

Craftsman

Craftsman 572.610520 Manuel utilisateur

Craftsman

Craftsman 124.34985 Manuel utilisateur

Craftsman

Craftsman 320.23465 Manuel utilisateur

Craftsman

Craftsman 315.175100 Manuel utilisateur

Craftsman

Craftsman CMES612 Manuel utilisateur

Craftsman

Craftsman 113.213722 Manuel utilisateur

Craftsman

Craftsman nEXTEC 320.30566 Manuel utilisateur

Craftsman

Craftsman 320.17255 Manuel utilisateur

Craftsman

Craftsman CMEW020-CA Manuel utilisateur

Craftsman

Craftsman 137.219120 Manuel utilisateur

Craftsman

Craftsman 315.172281 Manuel utilisateur

Craftsman

Craftsman 572.61000 Manuel utilisateur

Craftsman

Craftsman 315.115860 Manuel utilisateur

Craftsman

Craftsman 351.252741-3 Manuel utilisateur

Craftsman

Craftsman Colovos 351.181700 Manuel utilisateur

Craftsman

Craftsman 137.219001 Manuel utilisateur

Craftsman

Craftsman CMEW020 Manuel utilisateur

Manuels Outils électriques populaires d'autres marques

AEG

AEG OMNI-JS Manuel utilisateur

SIP

SIP 01533 Manuel utilisateur

Ribimex

Ribimex PRS499 Manuel utilisateur

3M Fiber Optic Connector Crimp Tool Manuel utilisateur

Ryobi

Ryobi P524 Manuel utilisateur

ROJEK

ROJEK FSN 300A Manuel utilisateur

Kemper

Kemper 1740PRO Manuel utilisateur

WABCO

WABCO OptiTire Manuel utilisateur

EINHELL

EINHELL TE-MS 18/210 Li Manuel utilisateur

Orgapack

Orgapack OR-T 85 Guide rapide

TOUGHCUT

TOUGHCUT Diamond 400 Manuel utilisateur

Yaros

Yaros PB-3603 Manuel utilisateur

Fein

Fein BSS 2.0 E Guide de configuration

Baileigh Industrial

Baileigh Industrial SS-2725 Manuel utilisateur

Milwaukee

Milwaukee 2674-20 Manuel utilisateur

Fein

Fein BLs 1.6 Manuel utilisateur

Princess

Princess Electric Multi Sharpener Manuel utilisateur

FOREDOM

FOREDOM K.1050 Manuel