Craftsman 917.379600 Manuel utilisateur

Owner's Manual

ICRRFTSMRWI

6.75 HORSEPOWER

21" REAR DISCHARGE

POWER PROPELLED

ROTARY LAWN MOWER

Model No.

917.379600

•Safety

•Assembly

•Operation

•Maintenance

•EspaSol

•Repair Parts

NOTE: Engines which are certified to comply with California and U.S. EPA emission regulations

for SORE (Small Off Road Equipment), are certified to operate on regular unleaded gasoline,

and include the following emission control systems: Engine Modiflcatton(EM), and Three-way

Catalyst ('rwc) (If so equipped).

AVISO: Los motores homologados para cumplir can la reglamentacibn sobre emisiones de

California y de la Agencia de Proteccidn Ambiental estadounidense (EPA) para equipos

pequefios no circulantes (SORE) funcionan con gasolina normal sin plomo, e incluyen los

siguientes sistemas de controlde emisiones: modificacibn del motor (EM) y catalizador de triple

accibn (TWC) (en case de tener/o).

The D.O.M. decal includes engine life specifications for the emissions-related useful life period of

your engine. This period relates to the emission compliance life as certified by EPNCARB. To

findthe life period specification for your engine, please match one of the following letters with the

letter printed on your D.O.M decal: (C) 125 hours, (B) 250 hours, (A) 500 hours.

La calcamania D.O.M incluye especificaciones sobre la duracibn de_ motor para el periodo de

vida dtil de su motor relaccionado con emisiones. Este periodo sa relaciona con la duracibn an

conformidad con las emisiones seg_n Io certiflcado por EPNCARB. Para hailer la especificaei6n

del periodo de vida de su motor, mire cud1de las siguientes letras viene impresa en su

calcomanla D.OM.: (C) 125 horas, (B) 250 horas, (A) 500 horas.

CAUTION:

Read and follow all

Safety Rules and Instructions

before operating this equipment

Sears, Roebuck and Co., Hoffman Estates, IL 60179

Visit our Craftsman website: www.sears.comlcraftsman

Warranty ............................................... 2

Safety Rules ......................................... 2

Assembly .............................................. 5

Operation .............................................. 6

Maintenance Schedule ...................... 10

Maintenance ....................................... 10

Product Specifications........................ 11

Service and Adjustments.................... 13

Storage ............................................... 14

Troubleshooting ................................. 16

Repair Parts........................................ 35

Parts Ordering ..................... Back Cover

LIMITED TWO YEAR WARRANTY ON CRAFTSMAN POWER MOWER

For two years from date of purchase, when this Craftsman Lawn Mower is maintained,

lubricated,and tuned up according to the operating and maintenance instructionsin

the owner's manual, Sears will repair free of charge any defect in material or workman-

ship.

If thisCraftsman Lawn Mower is used for commercial or rental purposes, this warranty

appliesfor only 90 days from the date of purchase.

This Warranty does not cover:

• Expendable items which become worn during normal use, such as rotary mower

blades, blade adapters, belts, air cleaners and spark plug.

• Repairs necessary because of operator abuse or negligence, including bent

crankshafts and the failure to maintain the equipment according to the instructions

contained in the owner's manual.

Warranty service is available by returning the Craftsman power mower to the nearest

Sears Service Center/Department in the United States. This warranty applies only

while this product is in use in the United States.

This Warranty gives you specific legal rights, and you may also have other rights which

vary from state to state.

Sears, Roebuck and Co., D/817 WA, Hoffman Estates, IIILnois60179

IMPORTANT: This cutting machine is capable of amputating hands and feet and

throwing objects. Failure to observe the following safety instructionscould result in

serious injury or death.

I.GENERAL OPERATION

•Read, understand, and follow all

instructionson the machine and in the

manual(s) before starting. Be thor-

oughly familiar with the controls and

the proper use of the machine before

starting.

•Do not put hands or feet near or under

rotating parts. Keep clear of the

discharge opening at all times.

• Only allow responsible individuals,

who are familiarwith the instructions,to

operate the machine.

•Clear the area of objects such as

rocks,toys, wire, bones, sticks, etc.,

which could be picked up and thrown

by the blade.

•Be sure the area is clear of other

people before mowing. Stop machine if

anyone enters the area.

• Do not operate the mower when

barefoot or wearing open sandals.

Always wear substantial foot wear.

• Do not pull mower backwards unless

absolutely necessary. Always look

down and behind before and while

moving backwards.

Do not operate the mower without

proper guards, plates, grass catcher or

other safety protective devices in place.

See manufacturer's instructions for

proper operation and installation of

accessories. Only use accessories

approved by the manufacturer.

• Stop the blade(s) when crossing grovel

drives, walks, or roads.

• Stop the engine (motor) whenever you

leave the equipment, before cleaning

the mower or unclogging the chute.

• Shut the engine (motor) off and wait

untilthe blade comes to complete stop

before removing grass catcher.

• Mow only in daylight or good artificial

light.

•Do not operate the machine while

under the influence of alcohol or drugs.

•Never operate machine in wet grass.

Always be sure of your footing: keep a

firm hold on the handle and walk; never

run.

•Disengage the self-propelled mecha-

nism or drive clutch on mowers so

equipped before starting the engine

(motor).

• If the equipment should start to vibrate

abnormally, stop the engine (motor)

and check immediately for the cause.

Vibration is generally a warning of

trouble.

•Always wear safety goggles or safety

glasses with side shields when

operating mower.

II. SLOPE OPERATION

Slopes are a major factor related to slip

and fall accidents which can result in

severe injury. All slopes require extra

caution. Ifyou feel uneasy on a slope, do

not mow it.

DO:

•Mow across the face of slopes: never

up and down. Exercise extreme caution

when changing direction on slopes.

•Remove obstacles such as rocks, tree

limbs, etc.

• Watch for holes, ruts, or bumps. Tall

grass can hide obstacles.

DO NOT:

•Do not trim near drop-offs, ditchesor

embankments. The operator could lose

footing or balance.

•Do not trim excessively steep slopes.

• Do not mow on wet grass. Reduced

footing could cause slipping.

II1.CHILDREN

Tragic accidents can occur if the operator

isnot alert to the presence of children.

Children are often attracted to the

machine and the mowing activity. Never

assume that children will remain where

you last saw them.

•Keep children out of the trimming area

and under the watchful care of another

responsible adult.

• Be alert and turn machine off if children

enter the area.

• Before and while walking backwards,

look behind and down for small

children.

• Never allow children to operate the

machine,

• Use extra care when approaching blind

comers, shrubs, trees, or other objects

that may obscure vision.

IV. SERVICE

•Use extra care in handling gasoline

and other fuels. They are flammable

and vapors are explosive.

-Use only an approved container.

-Never remove gas cap or add fuel

with the engine running. Allow

engine to cool before refueling. Do

not smoke.

-Never refuel the machine indoors.

-Never store the machine or fuel

container inside where there is an

open flame, such as a water heater.

• Never run a machine inside a closed

area.

• Never make adjustments or repairs with

the engine (motor) running. Disconnect

the spark plug wire, and keep the wire

away from the plug to prevent acciden-

tal starting.

• Keep nuts and bolts, especially blade

attachment bolts, tight and keep

equipment in good condition.

•Never tamper with safety devices.

Check their proper operation regularly.

• Keep machine free of grass, leaves, or

other debris build-up. Clean oil or fuel

spillage. Allow machine to cool before

storing.

•Stop and inspectthe equipment if you

strike an object. Repair, if necessary,

before restarting.

•Never attempt to make wheal height

adjustments while the engine (motor) is

running.

•Grass catcher components are subject

to wear, damage, and deterioration,

which could expose moving parts or

allow objects to be thrown. Frequently

check components and replace with

manufacturer's recommended parts,

when necessary.

• Mower blades are sharp and can cut.

Wrap the blade(s) or wear gloves, and

use extra cautionwhen servicing them.

•Do not change the engine governor

setting or overspead the engine.

ALook for this symbol to point out

important safety precautions. It means

CAUTION!!! BECOME ALERT!!! YOUR

SAFETY IS INVOLVED.

ACAUTION: In order to prevent

accidental starting when setting up,

transporting, adjusting or making repairs,

always disconnect spark plug wire and

place wire where it cannot contact spark

plug.

A CAUTION: Muffler and other engine

parts become extremely hot during

operation and remain hot after engine

has stopped. To avoid severe burns on

contact, stay away from these areas.

AWARNING: Engine exhaust, some of its

constituents,and certain vehicle

components contain or emit chemicals

known to the State of Californiato cause

cancer and birthdefects or other

reproductive harm.

AWARNING: Battery posts,terminals and

related accessories contain lead and lead

compounds,chemicals known to the State

of California to cause cancer and birth

defects or other reproductive harm. Wash

hands after handling.

These accessories were available when this lawn mower was produced. They are not

shipped with your mower. They are also available at most Sears retail outlets and

service canters. Most Sears stores can also order repair parts for you,when you

provide the model number of your lawn mower. Some of these accessories may not

apply to your lawn mower.

LAWN MOWER PERFORMANCE

CLIPPING DEFLECTOR

FOR REAR DISCHARGE LAWN MOWERS MULCHER KITS STABILIZER

GRASS CATCHERS GRASS CATCHERS /' 'i

\FOR Ill

[_ \ I__S-_-_- REAR DISCHARGE SlDEDISCHARGE i

"_i_- _ LAWN MOWERS LAWN MOWERS ---

GAS CANS

LAWN MOWER MAINTENANCE

MUFFLERS AIR FILTERS SPARK PLUGS

" _ _ __,

BELTS BLADES BLADE ADAPTERS WHEELS ENGINE OIL

Read these instructionsand this manual

in its entirety before you attempt to

assemble or operate your new lawn

mower.

IMPORTANT: This lawn mower is

shippedWITHOUT OIL OR GASOLINE in

the engine.

Your new lawn mower has been as-

sembled at the factory with the exception

of those parts left unassembled for

shipping purposes. All parts such as nuts,

washers, bolts, etc., necessary to com-

plete the assembly have been placed in

the parts bag.To ensure safe and proper

operationof your lawn mower, all parts

and hardware you assemble must be

tightened securely.Use the correct tools

as necessary to ensure proper tightness.

TO REMOVE LAWN MOWER FROM

CARTON

1. Remove loose parts included with

mower.

2. Cut down two end comers of carton

and lay end panel down fiat.

3. Remove all packing materials except

padding between upper and lower

handle and padding holding operator

presence control bar to upper handle.

4. Roll lawn mower out of carton and

check carton thorougly for additional

loose parts.

HOWTO SET UPYOUR LAWN

MOWER

TO UNFOLD HANDLE

IMPORTANT: Unfold handle carefully so

as not to pinch or damage control cables.

1. Raise handles until lower handle

section locks into place in mowing

position.

2. Remove protective padding, raise

upper handle section into place on

lower handle and tighten both handle

knobs.

3. Remove handle padding holding

operator presence control bar to

upper handle.

Your lawn mower handle can be adjusted

for your mowing comfort. Refer to "Adjust

Handle" in the Service and Adjustments

section ofthis manual.

Operatorpresence

controlbar

Upper handle ---_/J

Lif_up

ing

_osition

Lower handle

KNOWYOUR LAWN MOWER

READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR

LAWN MOWER. Compare the illustrations with your lawn mower to familiarize yourself

with the IocatLon of various controls and adjustments. Save this manual for future

reference.

These symbols may appear on your lawn mower or in literature supplied with the

product. Learn and understand their meaning.

CAUTION ENGINE ENGINE FAST SLOW CHOKE FUEL OIL DANGER, KEEP HANDS

OR WARNING ON OFF AND FEET AWAY

Engine zone

control cable

presence control bar

Starter handle' knob

Grass

Gasoline cap

Housing

Drive cover

Prim_

iMPORTANT: This lawn mower is

shippedWITHOUT OIL OR GASOLINE

in the engine. Wheel adjuster (on each wheel)

MEETS CPSC SAFETY REQUIREMENTS

Sears rotary walk-behind power lawn mowers conformto the safety standards of the

Amedcan National Standards Instituta and the U.S. Consumer Product Safety Commis-

sion. The blade turns when the engine is running.

Operator presence control bar -must Starter handle - used for starting the

be held down to the handle to start the engine.

engine. Release to stop the engine. Drive control lever -usedto engage

Primer - pumps additional fuel from the power-propelled forward motion of lawn

carburetor to the cylinder for use when mower.

starting a cold engine. 6

Theoperationofanylawn

mowercanresultin

foreignobjectsthrowninto

the eyes, which can result

in severe eye damage.

Always wear safety glasses or eye

shields while operating your lawn mower

or performing any adjustments or repairs.

We recommend awide vision safety

mask over spectacles or standard safety

glasses.

HOWTO USEYOUR LAWN MOWER

ENGINE SPEED

The engine speed was set at the factory

for optimum performance, Speed is not

adjustable.

ENGINE ZONE CONTROL

_kCAUTION: Federal regulations require

an engine control to be installed on this

lawn mower in orderto minimize the dsk

of blade contact injury.Do not under any

circumstances attempt to defeat the

function of the operator control.The blade

turns when the engine is running.

•Your lawn mower is equipped with an

operator presence control bar which

requires the operator to be positioned

behind the lawn mower handle to start

and operate the lawn mower.

TO ADJUST CUTTING HEIGHT

Raise wheels for low cut and lower

wheels for high cut, adjust cuttingheight

to suit your requirements. Medium

positionis best for most lawns.

• To change cutting height, squeeze

adjuster lever toward wheel. Move

wheel up or down to suit your require-

ments. Be sure all wheels are in the

same setting.

NOTE: Adjuster is properly positioned

when plate tab inserts into hole in lever.

Also, 9-position adjusters (if so equipped)

allow lever to be positioned between the

plate tabs. PlateTab

LowerWheelsfor HighCut

RaiseWheelsfor LowCut

TO CONVERT MOWER

Your lawnmower was shippedreadytobe

usedas a mulcher. Toconvertto bagging:

REARBAGGING

•Liftreardoo_ofthe lawnmower and place

the grass catcherframehooksontothe

doorpivotpins.

•To convertto mulching operation,remove

grasscatcher and closerear door.

_,CAUTION: Do not run your lawn mower

without clipping deflector or approved

grass catcher in place. Never attemptto

operate the lawn mower with the rear

door removed or propped open.

Pivot Grass catcher

handle

Catcher frame

TO EMPTY GRASS CATCHER

1. Open door and liftup on grass catcher

using the frame handle.

2. Remove grass catcher with clippings

from under lawn mower handle.

3. Empty clippingsfrom bag using both

frame handle and bag handle.

NOTE: Do not drag the bag when

emptying; it will cause unnecessary wear.

Bag catcher frame

handle handle

DRIVE CONTROL

• Self-prapelling is controlled by holding

the operator presence control bar down

to the handle and pushing the drive

control lever forward until it clicks;then

releasing the lever.

• Forward motionwill stop when the

operator presence control bar is

released. To stop forward motion

without stopping engine, release the

operator presence control bar slightly

until the drive control disengages. Hold

operator presence control bar down

against handle to continue mowing

without self-propelling.

•To keep drive control engaged when

turning corners, push down on handle

and lift front wheels off groundwhile

turning lawn mower.

Operatorpresencecontrolbar Drive

' t control

\_, Toengage \_ Drive control

"" dn_'econtrol_" disengaged

BEFORE STARTING ENGINE

ADD OIL

Your lawnmower is shipped without oil in

the engine. Engine holds 20 oz. of oil.

For type and grade of oil to use, see

=ENGINE" in Maintenance section of this

manual.

1. Be sure lawnmower is level and area

around oil fill is clean.

2. Remove engine oil cap and figto the

full line on the dipstick. Pour oil slowly.

Do not over fill.

NOTE: Allow oil to settle down into engine

for accurate reading. To read proper level,

tighten engine oil cap, then remove it to

read the dipstick.

3. Reinstall engine oil cap and tighten.

• Check oil level before each use. Add

oil if needed. Fill to full line on dipstick.

• Change the oil after every 25 hours of

operation or each season. You may

need to change the oil more often

under dusty, dirty conditions.

ADD GASOLINE

•Fillfuel tank. Use fresh, clean, regular

unleaded gasoline with a minimum of

87 octane. Do not mix oil with gaso-

line. Purchase fuel in quantities that

can be used within 30 days to assure

fuel freshness,

_WARNING: Experience indicates that

alcohol blended fuels (called gasohol or

using ethanol or methanol) can attract

moisturewhich leads to separation and

formation of acids during storage, Acidic

gas can damage the fuel system of an

engine while in storage. To avoid engine

problems, the fuel system should be

emptied before storage of 30 days or

longer. Drain the gas tank, start the

engine and let it run until the fuel lines

and carburetorare empty. Use fresh fuel

next season. See Storage Instructionsfor

additional information. Never use engine

or carburetor cleaner products in the fuel

tank or permanent damage may occur.

*_,CAUTION: Fill to bottom ofgas tank

filler neck. Do not overfill. Wipe off any

spilled oil or fuel. Do not store, spillor

use gasoline near an open flame.

Engine oil cap Gasoline filler cap

TO START ENGINE

NOTE: Due to protectivecoatings on the

engine, a small amount of smoke may be

present duringthe initial use of the

product and should be considered

normal.

1. To start a cold engine, push primer

three (3) times before trying to start.

Use afirm push. This step is not

usually necessary when starting an

engine which has already run for a

few minutes.

2. Hold operator presence control bar

down to the handle and pull starter

handle quickly. Do not allow starter

rope to snap back.

TO STOP ENGINE

•To stop engine, release operator

presence control bar.

NOTE: In cooler weather it may be

necessary to repeat primingsteps. In

warmer weather over priming may cause

floodingand engine will notstart. If you

do flood engine, wait a few minutes

before attemptingto start and do not

repeat priming steps.

MOWINGTIPS

• Undercertainconditions,suchasvery

tailgrass,itmaybenecessarytoraise

theheightofcuttoreducepushing

effortandtokeepfrom overloading the

engine and leaving clumps of grass

clippings. It may also be necessary to

reduce ground speed and/or run the

lawn mower over the area a second

time.

• For extremely heavy cutting, reduce the

width of cut by overlapping previously

cut path and mow slowly.

• For better grass bagging and most

cuttingconditions, the engine speed

should be set in the fast position.

•When using a rear discharge lawn

mower in moist, heavy grass, clumps of

cut grass may not enter the grass

catcher. Reduce ground speed

(pushing speed) and/or run the lawn

mower over the area a second time.

• If a trailof clippingsis left on the right

side of a rear discharge mower, mow in

a clockwise directionwith a small

ovedap to collect the clippings on the

next pass.

• Pores in cloth grass catchers can

become filledwith dirt and dust with use

and catchers will collect less grass. To

prevent this, regularly hose catcher off

with water and let dry before using.

• Keep top of engine around starter clear

and clean of grassclippings and chaff.

This will help engine air flow and

extend engine life.

MULCHING MOWlNGTIPS

IMPORTANT: For best performance,

keep mower housingfree of built-up

grass and trash. See =Cleaning" in

Maintenance section of this manual.

•The special mulching blade wig recut

the grass clippings many times and

reduce them in size so that as they fall

onto the lawn they will disperse into the

grass and not be noticed. Atso, the

mulched grass will biodegrade quickly

to provide nutrientsfor the lawn.

Always mulch with your highest engine

(blade) speed as this will provide the

best racutting action of the blades.

•Avoid cuttingyour ]awn when it is wet;

Wet grass tends to form clumps and

interferes with the mulchingaction.

The besttime to mow your lawn isthe

early afternoon. At this time the grass

has dried and the newly cut area will

notbe exposed to the direct sun.

•For best results, adjustthe lawn mower

cuttingheight so that the lawn mower

cuts off onlythe top orm-thirdof the

grass blades. If the lawn is overgrown

it will be necessary to raise the height

of cutto reduce pushingeffort and to

keep from overloading the engine and

leaving dumps of mulched grass. For

extremely heavy mulching, reduce your

width of cut by overlapping previously

cut path and mow slowly.

•Certain types of grass and grass

conditionsmay require that an area be

mulched a second time to completely

hidethe clippings. When doing a

second cut, mow across or perpendicu-

lartothe firstcut path,

•Change your cutting pattern from week

to week. Mow northto south one week

then change to east to west the next

week. This will help prevent matting

and graining of the lawn.

Max 1/3

MAINTENANCE SCHEDULE .,,,,,,,__°_.._J

AS YOU COMPLETE f_a_O_l_\/iel:: nA--_

Check for Loose Fasteners VS

Ctaan/Inspect Grass Catcher

(If Equipped) _(t_ II/

MClean Lawn Mower _l/

:lean Under Drive Cover

(Power-Propelled Mowers)

Check drive belt/peileys

Power-Propelled Mowers) II/'

Check/Sharpen/Replace Btade V°3

LubricationChart t_ l/

Clean Battery/Recharge

Electric Start Mowers ! II/ 11/4

ECheck Engine Oil Level P//

NChan_fflEngine Oil t/1,2

G CleanAirFiltar Ii/ 2

Inspect Muffler

N CleanorReplaceSparkPlug

E ReplaceAirFilterPaperCartridge t_2

1. Change ii"o¢e of_Jn when operating under a hea W load or in high ambient temperatures.

2 - Service rnomoitenwhen operating indirty ordustyconditions

3 * Replace _ades more oflen when _insandy soil

4-Chacge48 houn5at end olseason,

GENERAL RECOMMENDATIONS

The warranty on this lawn mower does

not cover items that have been subjected

to operator abuse or negligence. To

receive full value from the warranty,

operator must maintain mower as

instructedin this manual,

Some adjustments will need to be made

periodically to properly maintain your

unit,

All adjustments in the Service and

Adjustments section of this manual

should be checked at least once each

season.

• Once a year, replace the spark plug,

clean or replace air filter element and

check blade for wear. A new spark

plug and clean/new air filter element

assures proper air-fuel mixture and

helps your engine run better and last

longer.

• Follow the maintenance schedule in

this manual.

BEFORE EACH USE

1. Check engine oil level.

2. Check for loose fasteners.

LUBRICATION

Keep unit well lubricated (See "LUBRI-

CATION CHART").

LUBRICATION CHART

(_ Wheeladjuster

Brake spring bracket

-_andlebracket mounting pin

_) Refer to maintenance "Engine" section.

(2) Spray lubricant

IMPORTANT: Do notoil or grease

plastic wheel bearings, viscous lubri-

cants will attract dust and dirtthat will

shorten the life of the self-lubricating

bearings, ifyou feel they must be

lubricated, use only a dry, powdered

graphite type lubricant sparingly.

Table des matières

Autres manuels Craftsman Tondeuse à gazon

Craftsman

Craftsman 917.254244 Manuel utilisateur

Craftsman

Craftsman 917.388461 Manuel utilisateur

Craftsman

Craftsman T1000 series Manuel utilisateur

Craftsman

Craftsman 917.377631 Manuel utilisateur

Craftsman

Craftsman C935-355190 Manuel utilisateur

Craftsman

Craftsman 917.371881 Manuel utilisateur

Craftsman

Craftsman EZ3 917.271140 Manuel utilisateur

Craftsman

Craftsman 917.376656 Manuel utilisateur

Craftsman

Craftsman 917.270741 Manuel utilisateur

Craftsman

Craftsman 917.276821 Manuel utilisateur

Craftsman

Craftsman 917.276816 Manuel utilisateur

Craftsman

Craftsman 917.273260 Manuel utilisateur

Craftsman

Craftsman 917.377843 Manuel utilisateur

Craftsman

Craftsman 917.371760 Manuel utilisateur

Craftsman

Craftsman 917.25049 Manuel utilisateur

Craftsman

Craftsman 917.273500 Manuel utilisateur

Craftsman

Craftsman 917.377091 Manuel utilisateur

Craftsman

Craftsman 502.251220 Manuel utilisateur

Craftsman

Craftsman 917.388011 Manuel utilisateur

Craftsman

Craftsman 944.365871 Manuel utilisateur

Craftsman

Craftsman 917.28866 Manuel utilisateur

Craftsman

Craftsman 917.371340 Manuel utilisateur

Craftsman

Craftsman 917.272911 Manuel utilisateur

Craftsman

Craftsman 917.270($30 Manuel utilisateur

Manuels Tondeuse à gazon populaires d'autres marques

RHINO

RHINO 1958 Manuel utilisateur

Wolf Garten

Wolf Garten Compact plus 40 B Manuel utilisateur

Cub Cadet

Cub Cadet LTX 1045 Manuel utilisateur

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Manuel utilisateur

Challenge

Challenge CH18V2 Instructions de fonctionnement

TALEN TOOLS

TALEN TOOLS AVR HGM30 Manuel utilisateur

DEWEZE

DEWEZE ATM-725 Manuel d'utilisation

Weed Eater

Weed Eater 180083 Manuel utilisateur

Husqvarna

Husqvarna Poulan Pro PP185A42 Manuel utilisateur

Better Outdoor Products

Better Outdoor Products Quick Series Manuel utilisateur

Cub Cadet

Cub Cadet 23HP Z-Force 60 Manuel d'utilisation

MTD

MTD 795, 792, 791, 790 Manuel utilisateur

Toro

Toro Groundsmaster 3505-D Manuel utilisateur

Dennis

Dennis FT 610 Manuel utilisateur

AIRFORCE

AIRFORCE F-15 Gen 3 Manuel utilisateur

MTD

MTD 126-220-000 Manuel utilisateur

Toro

Toro 74806 Manuel utilisateur

Stihl

Stihl RMA 443 PV Manuel utilisateur