Craftsman 917.272244 Manuel utilisateur

Owner's Manual

20.0 HP

ELECTRIC START

48" MOWER

AUTOMATIC

LAWN TRACTOR

Model No.

917.272244

•Safety

• Assembly

• Operation

•Maintenance

•Repair Parts

CAUTION:

Read and follow all

Safety Rules and Instructions

before operating this equip-

ment.

For answers to your questions

about this product, Call:

1-800-659-5917

Sears Craftsman Help Line

5 am -5 prn, Man - Sat

Sears, Roebuck and Co., Hoffman Estates, IL 60179

Visit our Craftsman website: www.sears.com/craftsman

Warranty ............................................... 2

Safety Rules ......................................... 3

Product Specifications .......................... 6

Assembly .............................................. 8

Operation ............................................ 12

Maintenance Schedule ...................... 18

Maintenance ....................................... 18

Service and Adjustments .................... 22

Storage ............................................... 29

Troubleshooting ................................. 30

Repair Pads ........................................ 34

Parts Ordering ..................... Back Cover

LIMITED TWO YEAR WARRANTY ON CRAFTSMAN RIDING EQUIPMENT PARTS

For two (2) years from the date of purchase, if this Craftsman Riding Equipment is

maintained, lubricated and tuned up according to the instructions in the owner's

manual, Sears wLIIrepair or replace, free of charge, any parts found to be defective in

material or workmanship. Warranty service is available free of charge by returning

your Craftsman riding equipment to your nearest Sears Service Center. In-home

warranty service is available but a tdp charge will apply. This warranty applies only

while this product is in the United States.

ThisWarranty does notcover:

• Expendable items which become worn during normal use, such as blades, spark

plugs, air cleaners, belts and oil filters.

• Tire replacement or repair caused by punctures from outside objects, such as nails,

thorns, stumps, or glass.

• Repairs necessary because of operator abuse, including but not limitedto, damage

caused by towing objects beyond the capability of the riding equipment, impacting

objects that bend the frame or crankshaft, or over speeding the engine.

• Repairs necessary because of operator negligence, including but not limited to,

electrical and mechanical damage caused by improper storage, failure to use the

proper grade and amount of engine oil, failure to keep the deck clear of flammable

debris, or the failure to maintain the equipment according to the instructions

contained in the owner's manual.

• Engine (fuel system) cleaning or repairs caused by fuel determined to be contami-

nated or oxidized (stale). In general, fuel should be used within thirty (30) days of its

purchase date.

• Riding equipment used for commercial or rental purposes. A product is "used for

commercial purpose" if is used for any purpose other than single family household

dwellings or in usage where profit is made.

LIMITED 90 DAY WARRANTY ON BATrERY

For ninety (90) days from date of purchase, if any battery included with this riding

equipment proves defective in material or workmanship and our testing determines

the battery will not hold a charge, Sears will replace the battery at no charge. War-

rarity service is available free of charge by returning your Craftsman riding equipment

to your nearest Sears Service Center. In-home warranty service is available but a trip

charge will apply. This warranty applies only while this product is in the United States.

TO LOCATE THE NEAREST SEARS SERVICE CENTER OR TO SCHEDULE IN-

HOME WARRANTY SERVICE, SIMPLY CONTACT SEARS AT 1-800-4-MY-HOME

This Warranty givesyou specificlegal dghts, and you may also have other rights

which may vary from state tostate.

Sears, Roebuck and Co., D/817 WA, Hoffman Estates, FL 60179

MPORTANT: This cuttng machine is capable of amputating hands and feet and

throwingobjects. Failure to observethe followingsafety instructionscould result in

serious inju_ or death.

L GENERAL OPERATION

• Read, understand,and to[low all

instructionsinthe manual and on the

machine beforestarting.

•Only allow responsibleadults,who are

familiar withthe instructions,to operate

the machine.

•Clear the areaof objectssuchas rocks,

toys,wire, etc., whichcouldbe picked

up end thrown by the blade.

•Be surethe area isdear ofother people

before mowing. Stop machine if anyone

enters the area.

•Never carrypassengers.

• Do nuf mow in reverse unless absolutely

necessary. Always look down and

behind before and while backing.

• Be aware Ofthe mowerdischarge

directionand do not point it at anyone.

Do notoperatethe mowerwithouteither

the entiregrass catcher or the guard in

place.

•Slowdown before turning.

•Never leave a running machine

unattended. Alwaysturnoff blades,set

parkingbrake,stop engine, and remove

keys beforedismounting.

•Turn off bladeswhen not mowing.

•Stop engine before removinggrass

catcheror uncloggingchute.

•Mow onlyin daylightor goodartificial

light.

•Do not operate the machine while under

the inf_ance of alcohelor drugs.

• Watch fortrafficwhen operating near or

crossingroadways.

• Use extra care when Ioadlm:Jor unload-

ingthe machine intoatrailer ortruck.

•Data indicatesthat operators,age 60

years and above, are involved in a large

percentage of riding mower-ralated

injuries. These operatorsshould

evaluate their abilityto operate the riding

mower safely enoughto protectthem-

selves and others from serious injury.

• Keep machine free of grass, leaves or

other debds build-up which can touch

hot exhaust /engine parts and bum. Do

not allow the mower deck to plow leaves

or other debris which can cause build-

up to occur. Clean any oil or fuel

spillage before operating or storing the

machine. Allow m._chieeto coolbefore

storage.

I1.SLOPE OPERATION

Slopes are a major factor related toleas-of-

controland tipover accidents, whichcan re-

sult in severe injury or death. All slopes

requireextra caution, Ifyou cannotback up

the slope or if you feel uneasy on it, do not

mow it.

DO:

•Mow up and downslopes,not across.

•Remove obstaclessuchas rocks,tree

limbs,etc.

Watch for holes, ruts, orbumps. Uneven

terraincould overturnthe machine. Tat/

grass can hide obstacles.

Use slowspeed. Choose a low gear so

that you will not have to stop or shift

while on the slope.

Fo_lowthe manufacturer's recommenda-

tions for wheel weights or counter-

weights to improve stability.

Use extra care with grass catchers or

other attachments. These can change

the stability of the machine.

Keep all movement on the slopes slow

and gradual. Do not make sudden

changes in speed or direction.

Avoid starting or stopping on a slope. If

tires lose traction, disengage the blades

and proceed slowly straight down the

slope.

DO NOT:

• Do not turn on slopesunless necessary,

and then, turnslowly and gradually

downhill,|f possible.

•Do notmow neardrop-effs,ditches,or

embankments. The mower could

suddenlyturnever if awheel is overthe

edgeof a cliffor ditch,or if an edge

caves in.

•Do not mow on wet grass. Reduced

tractioncould cause sliding.

•DOnot try to stabilizethe machine by

puttingyour foot on the ground.

•Donotuse grass catcher onsteep

slopes.

IlL CHILDREN

Tragic accidents can occur ifthe operator

is not alert to the presence of children.

Childrenare often attracted to the

machine and the mowing activity. Never

assume that children will remain where

you last saw them.

• Keep children out of the mowing area

and under the watchful care of another

responsible adult.

• Be alert and turn machine off if children

enter the area.

• Before and when backing, look behind

and down for small children.

•Never carry children. They may fall oft

and be sedously injuredor intedere

with safe machine operation.

• Never allow children to operate the

machine.

• Use extra care when approaching blind

comers, shrubs, trees, or other objects

that may obscure vision.

IV. SERVICE

•Use extra care in handling gasoline

and other fuels. They are flammable

and vapors are explosive.

-Use only an approved container.

-Never remove gas cap or add fuel

with the engine running. Allow

engine to COOlbefore refueling. 0o

not smoke.

-Never refuel the machine indoors.

-Never store the machine or fuel

container inside where there is an

open flame, suchas a water heater.

• Never run a machine inside aclosed

area.

•Keep nuts and bolts, especially blade

attachment bolts,tight and keep

equipment in good condition.

• Never tamper with safety devices.

Check their proper operation regularly.

• Keep machine free of grass, leaves, or

other debds build-up. Clean oil or fuel

spillage. Allow machine to cool before

stodng.

• Stop and inspect the equipment if you

strike an object. Repair, if necessary,

before restarting.

•Never mare ad_Jstments or repairs

with the engine running.

• Grass catcher components are subject

to wear, damage, and deterioration,

which could expose moving parts or

allow objects to be thrown. Frequently

check components and replace with

manufacturer's recommendedparts,

when necessary.

• Mower blades are sharp and can cut.

Wrap the blade s) or wear gloves, and

use extra caution when sew c ng them.

• Check brake operation frequently.

Adjust and service as required.

• Be sure the area is clear of other

people before mowing. Stop machineif

anyone enters the area.

•Never carry passengers or children

even with the blades off.

• DO not mow in reverse unless abso-

lutely necessary. Always look down

and behind before and while backing.

• Never carry children. 3"hey may lall off

and be seriously injured or interfere

with safe machine operation.

• Keep children out of the mowing area

and under the watchful care of another

responsible adult.

•Be alert and turn machine off ifchildren

enter the area.

• Before and when backing, look behind

and down for small children.

•Mow up and down slopes (15° Max),

not across.

• Remove obstaclessuch as rocks,tree

limbs,etc.

•Watch forholes, ruts,or bumps.

Uneven terrain could overturn the

machine. Tall grass can hide obstacles.

•Use slowspend. Choose a low gear so

that you will nothave to stop or shift

while on the slope.

•Avoid starting or stopping on a slope. If

tires lose traction, disengage the

blades and proceed slowly straight

down the slope.

• If machine stops while going uphill,

disengage blades, shift into reverse

and back down slowly.

• Do not turn on slopes unless neces-

sary, and then, turn slowly and gradu-

ally downhill, if possible.

_)&Lock for this symbolto point out

important safety precautions. It means

CAUTION!J! BECOMEALERT!!! YOUR

SAFETY ISINVOLVED.

,_kCAUTION: In order to prevent

accidental startingwhen setting up,

transporting, adjusting or making repairs,

always disconnect spark plug wire and

place wire where it cannot contact spark

plug.

•(_CAUTION: Do notcoast down a hill in

neutral, you may lose controlofthe

tractor.

_CAUTION; Tow onlythe attachments

that are recommended by and comply

with specificationsof the manufacturer of

your tractor. Use common sense when

towing. Operate only at the lowest

possiblespeed when on a slope. Too

heavy of a load, while on a slope, is

dangerous. Tires can lose tractionwith

the groundand cause you to lose control

of yourtractor.

_WARNING: Engineexhaust some of

its consttuants, and certain vehicle

components containor emit chemicals

known to the State of Californiato cause

cancer and birthdefects or other repro-

ductive harm.

4_WARNING: Batter,!posts, terminals

and related accessones contain lead and

lead compounds, chemicals known to the

State of Californiato cause cancer and

birthdefects or other reproductiveharm.

Wash hands after handling.

PRODUCTSPECIFICATIONS

GASOLINE 3.5 GALLONS

CAPACITY UNLEADED

AND TYPE: REGULAR

OILTYPE SAE 10W30

(ABOVE 32°F)

(API-SF-SJ): SAE 5W-30

(BELOW 32°1=)

OIL CAPACITY: W/FILTER: 4.5 PINTS

WiOFILTER:4.0PINTS

SPARK PLUG: CHAMPION RC12YC

GAP: .030")

GROUND SPEED FORWARD: 0-5,5

(MPH): REVERSE: 0-2.4

TIREPRESSURE: FRONT: 14 PSI

REAR: 10 PSI

CHARGING

SYSTEM: 15AMPS @3600 RPM

BATTERY: AMP/HR: 30

MIN. CCA: 240

CASE SIZE: U1R

BLADE BOLT 45-55 FT, LBS.

TORQUE:

CONGRATULATIONS on your purchase

of a new tractor. It has been designed,

engineered and manufactured to give you

the best possible dependability and

performance.

Should you experience any problem you

cannot easily remedy, please contact a

Sears or other qualifiedservice center.

We have competent, well-trainedtechni-

cians and the proper tools to service or

repair this tractor.

Please read and retain this manual. The

instructionswill enable you to assemble

and maintain your tractor properly.

Always observethe "SAFETY RULES",

REPAIR AGREEMENT

ARepair Agreement is available on this

product, Contactyour nearest Sears

storefor details,

CUSTOMER RESPONSIBILITIES

•Read and observethe safety rules.

•Fellow aregular schedule in maintain-

ing, cadngfor and using your tractor.

•Follow the instructionsunder "Mainte-

nance" and "Storage" sectionsof this

owner's manual.

_WARNING: This tractor isequipped

with an internal combustionengine and

should not be usedon or near any

unimproved forest-covered, brush-

covered or grass-covered land unless the

engine's exhaust system is equipped with

a spark arrester meeting applicable local

orstate laws (ifany). If a spark arraster is

used, it should be maintained in effective

working orderby the operator.

In the state ofCaliforniathe above is

requiredby law (Section 4442 of the

California Public Resoumes Code).

Other states may have similarlaws.

Federal laws apply on federal lands. A

spark arrester for the muffler isavailable

through your nearest Sears service

center (See REPAIR PARTS section of

this manual).

Steering Wheel

Steering

Wheel insert Steedng Sleeve

(1) W_

17/32 x 1-,3/16x 12 Gauge

i_(1) Knob

(5) Retainer Springs

(2) Retainer Springs (single loop)

Mower (2)Flanged

(1)FrontPlate _"

Assemb,y _

_r" (4) Adjusting Bar Gauge Wheels

_ _--_ (4) RetainerSpdngs

| (doub,e,oop)

3/8-16

_,_4> Wheels <4,Washers L_..._J [_"

3/8 x 3/4 x 14 Ga?_=.f

(4,L_clevisPins_j

(4) Shoulder Bolt

Nose Rolle_

(2) Locknuts

5/16-18

Nose Roller_

-- Nose Roller

_/r (2) Hex Bolts

S . _"_/(2) Washers_=._._'

5/1_-1_x 1 _ 17/32 x 7/8 x 16 Ga.--

Video Cassette Keys

(2) Keys

Slope Sheet

ForFutureUse

Your new tractor has been assembled at the factory withexception of those parts left

unassembled for shipping purposes. To ensure safe and proper operation of your

tractor all parts and hardware you assemble must be tightened securely. Use the

correct tools as necessary to insure proper tightness. Review the video cassette before

you begin.

TOOLS REQUIRED FOR ASSEMBLY

Asocket wrench set will make assembly

easier. Standard wrench sizes you need

are listed below.

(2) 9/16" wrench (1) 3/4" Socket w/

(1) 1/2" wrench drive ratchet

(1) Utility knife (1) Pliers

(1) "nre pressure gauge

When dght or left hand is mentioned in

this manual, it means, from your point of

view, when you are in the operating

position(seated behind the steering

wheel).

TO REMOVE TRACTOR FROM

CARTON

UNPACK CARTON

1. Remove all accessible loose parts

and parts cartons from carton.

2. Cut, from top to bottom, along lines on

all four corners of carton, and lay

panels flat.

3. Remove mower and packing mated-

als.

4. Check for any additional loose parts

or cartons and remove.

BEFORE REMOVING TRACTOR

FROM SKID

ATTACH STEERING WHEEL

1. Remove Iocknut and large flat washer

from steering shaft.

2. Position front wheels of the tractor so

they ere pointing straight forward.

3. Slide the steedng sleeve over the

steering shaft.

4. Position steedng wheel so cross bars

are horizontal (left to right) and slide

onto steering wheel adapter.

5. Secure steering wheel te steedng

shaft with Iocknut and large flat

washer previously removed. Tighten

securely.

6. Snap steering wheel insert into center

of steering wheel.

7. Remove protective materials from

tractor hood and grill.

IMPORTANT; Check for and remove any

staples in skid that may puncture tires

where tractor is to roll off skid.

I( )1 Look Nut

I_I_ge Flat Washer

SteeringWheel ___

Adapter_

Steering Shaft t, _._, _,_

Steering ]_ , u ,,

¥._iii

-.-I ,?, ,,,

)

HOW TO SET UP YOUR TRACTOR

CHECK BATTERY

1. Lift hoodto raised position.

NOTE: ifthis batteryis put into service

after month and year indicated on label

(label located between terminals) charge

battery for minimumof one hourat 6-10

amps. (See "BATTERY" in Maintenance

section of this manual for charging

instructions). .....

/ Label

INSTALL SEAT

Adjust seat before tightening adjustment

knob.

1, Remove adjustment knob and fiat

washer securing seat to cardboard

packing and set aside for assembly of

seat to tractor.

2. Pivot seat upward and remove from

the cardboard packing. Remove the

cardboard packing and discard,

3. Place seat on seat pan so head of

shoulder bolt is positioned over large

8slotted hole in pan.

4. Push down on seat to engage

shoulder bolt in slot and pull seat

towards rear oftractor.

5. Pivot seat and pan forward and

assemble adjustment knob and flat

washer loosely. Do not tighten.

6. Lower seat into operating position and

sit in seat.

7. Slide seat until a comfortable position

is reached which allows you to press

clutch/brake pedal all the way down.

8. Get off seat without moving its

adjusted position.

9. Raise seat and tighten adjustment

knob securely.

NOTE: You may now roll or drive your

tractor off the skid. Follow the appropriate

instruction bek_w to remove the tractor

from the skid.

TO ROLLTRACTOR OFF SKID (See

Operation section for location and

function of controls)

t. Press lift lever plunger and raise

attachment liftleverto itshighest

position.

2. Release parking brake by depressing

brake pedal.

3. Place freewheel control in freewheel-

ing positionto disengage transmis-

sion (See "TO TRANSPORT' in the

Operationsection of this manual),

4. Rolltractor forward off skid,

TO DRIVE TRACTOR OFF SKID (See

Operation section for location and

function of controls)

_1_WARNING: Before starting,read,

understandand follow all instructionsIn

the Operation sectionof this manual. Be

suretractor is in a well-ventilated area. Be

surethe area in front of tractor Is clear of

other people and objects.

1. Be sure all the above assembly steps

have been completed.

2. Check Brig(he oil level and fill fuel

tank with gasoline.

3. Place freewheel control in "transmis-

sion engaged" position.

4. Sit on seat in operating position,

depress brake pedal and set the

parking brake.

5, Press lift lever plunger and raise

attachment lift lever to its highest

position.

6. Start the engine. After engine has

started, move throttle control to idle

position.

7. Release parking brake.

8. Slowly depress forward ddve pedal

and ddve tractor off skid.

9. Apply brake to stop tractor and set

parking brake.

"t0.Turn ignition key to "OFF" position.

Continue with the instructions that follow.

ASSEMBLE GAUGE WHEELS TO

MOWER DECK

The gauge wheels are designed to keep

the mower deck in proper positionwhen

operating mower. Be sure they are

properly adjusted to ensure optimum

mower peliornqance.

1. Slide gauge wheel bar down into

bracket channel, Be sure that gauge

wheel bar aligningholes are on top,

Assemble gauge wheels as shown

using shoulder bolts, 3/8 washers and

3/8-16 center Iocknutsand tighten

securely.

2. For ease of mower to tractor assem-

bly, raise gauge wheels to highest

positionand retain with clevis pins

and spring retainers.

NOTE: Adjust gauge wheels before

operating mower. See "TO ADJUST

GAUGE WHEELS" in the Operation

section of this manual.

Shoulder Adjusting

Boil Bar

Gauge

Wheel 3/8-16 Center

_Locknut

TO ATrACH NOSE ROLLER

1. Position brackets, 17/32 x 7/8 x 16

gauge washers, and nose roller

between deck mounting brackets as

shown. Be sure to position brackets

on correct side, as shown.

2. Install hex bolts and lock nuts as

shown. Tighten hardware securely.

NOTE: Be sure bracket tabs are posi-

tioned in tab holes in deck brackets.

Tab Nose RollerLock •B" Bracket

Hex Bolt

Bracket

INSTALL MOWER AND DRIVE BELT

Be suretractoris onlevelsurfaceand mower

suspensionarmsare raisedwi_ attachment

liftcontrol.Engageparking brake.

1. Cut and remove ties securing anti-

sway bar and belts. Swing anti-sway

barto left side of mower deck.

2. Slide mower under tractor with

deflectorshield to dghtside of tractor.

IMPORTANT: Check belt for proper

routing in aUmower pulley grooves.

3. If equipped, turn height adjustment

knob counterclockwise until it stops.

4. Lower mower linkage with attachment

lift control.

5. Be sure belt tension rod is in disen-

gaged position. Lock

Belt TensionRod

Disengaged Position .-_,'J

Chassis

Gauge

Wheel

Double Loop

Retainer Spring

Anti-Sway

USEPUERSFOR I

RETAINERSPRINGSI Suspension Arms

/_Loop Double Loop Retainer

Spring (Outward

Up pointing deck pins)

6. Install belt into electdcclutch pulley

groove.

7. Place the suspension arms on

outward pointingdeck pins. Retain

with double loop retainer springwith

loops up as shown.

8. Installfront plate assembly 1otractor

suspension brackets and retain with

single loop retainer springsas shown.

9. Positionfront plate assemb]y between

front mower brackets. Raise deck and

plate assembly to align holes and

insert flanged pins. Secure pins with

double loop retainer springs between

the plate assembly and mower

brackets.

NOTE: To assist in locatinghole in

flanged pin, the hole in pin is inlinewith

notch on head ofpin. If necessary, move

mower side-to-sideto give space

between plate and mower brackets.

IMPORTANT: Check belt for proper

routing in all mower pulley grooves.

10.Engage belt tension rod by pushing

rod into locking bracket.

•qLCAUTION: Belt tension rodis spring

loaded. Have a tightgrip on red and

engage slowly.

11.Connect anti-sway bar to chassis

bracket under leftfootrest and retain

with double loop retainer spring.

12.1f equipped, turn height adjustment

knob clockwiseto remove slack from

mower suspension.

13. Raise deck to highest position.

14.Adjust gauge wheels before operating

mower as shown in the Operation

section of this manual.

Electric Clutch

Pulley Front Suspension Brackets

Front Front Plate Assembly

Mower _Double Loop

Bracket Retainer Springs

Single

Loop

Retainer

Springs

10 Shield

Table des matières

Autres manuels Craftsman Tondeuse à gazon

Craftsman

Craftsman 917.25480 Manuel utilisateur

Craftsman

Craftsman 917.376783 Manuel utilisateur

Craftsman

Craftsman 944.361170 Manuel utilisateur

Craftsman

Craftsman 917.374358 Manuel utilisateur

Craftsman

Craftsman 917.27077 Manuel utilisateur

Craftsman

Craftsman 917.370432 Manuel utilisateur

Craftsman

Craftsman T1200 Manuel utilisateur

Craftsman

Craftsman 3One 917.252590 Manuel utilisateur

Craftsman

Craftsman 25327 Manuel utilisateur

Craftsman

Craftsman 917.28626 Manuel utilisateur

Craftsman

Craftsman 917.275010 Manuel utilisateur

Craftsman

Craftsman 917.272054 Manuel utilisateur

Craftsman

Craftsman 917.272067 Manuel utilisateur

Craftsman

Craftsman 917.370771 Manuel utilisateur

Craftsman

Craftsman 917.986360 Manuel utilisateur

Craftsman

Craftsman 917.371530 Manuel utilisateur

Craftsman

Craftsman 917.378340 Manuel utilisateur

Craftsman

Craftsman 917.377532 Manuel utilisateur

Craftsman

Craftsman 247.37109 Manuel utilisateur

Craftsman

Craftsman 917.371032 Manuel utilisateur

Craftsman

Craftsman 917.379040 Manuel utilisateur

Craftsman

Craftsman 917.371641 Manuel utilisateur

Craftsman

Craftsman ZTL7000 Manuel utilisateur

Craftsman

Craftsman 917.379811 Manuel utilisateur

Manuels Tondeuse à gazon populaires d'autres marques

RHINO

RHINO 1958 Manuel utilisateur

Wolf Garten

Wolf Garten Compact plus 40 B Manuel utilisateur

Cub Cadet

Cub Cadet LTX 1045 Manuel utilisateur

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Manuel utilisateur

Challenge

Challenge CH18V2 Instructions de fonctionnement

TALEN TOOLS

TALEN TOOLS AVR HGM30 Manuel utilisateur

DEWEZE

DEWEZE ATM-725 Manuel d'utilisation

Weed Eater

Weed Eater 180083 Manuel utilisateur

Husqvarna

Husqvarna Poulan Pro PP185A42 Manuel utilisateur

Better Outdoor Products

Better Outdoor Products Quick Series Manuel utilisateur

Cub Cadet

Cub Cadet 23HP Z-Force 60 Manuel d'utilisation

MTD

MTD 795, 792, 791, 790 Manuel utilisateur

Toro

Toro Groundsmaster 3505-D Manuel utilisateur

Dennis

Dennis FT 610 Manuel utilisateur

AIRFORCE

AIRFORCE F-15 Gen 3 Manuel utilisateur

MTD

MTD 126-220-000 Manuel utilisateur

Toro

Toro 74806 Manuel utilisateur

Stihl

Stihl RMA 443 PV Manuel utilisateur