Cosasco Checkmate DL Manuel utilisateur
CHECKMATE™ DL
Reference Manual
11841 Smith Avenue
Santa Fe Springs, CA 90670
Tel: (562) 949-0123 • (800) 635-6898
Fax: (562) 949-3065
P/N: 723700-Manual Rev G
www.cosasco.com
CHECKMATE™ DL is a trademark of Rohrback Cosasco Systems, Inc. CORROSOME-
TER®, CORRDATA®, MICROCOR®, MICROCOR ® TOOLS ,and CORRDATA® PLUS
are registered trademarks of Rohrback Cosasco Systems, Inc.
Windows® is a trademark of Microsoft Corporation.
No part of this manual may be reproduced or transmitted in any form or by any means,
electronic or mechanical, including photocopying and recording, for any purpose, without
the express written permission of Rohrback Cosasco Systems, Inc.
CHECKMATE™ DL i
Table of Contents
Chapter 1 Introduction ............................................................................1
Chapter 2 Specifications .........................................................................3
Checkmate DL Instrument.......................................................................................3
Electrical..................................................................................................................3
Hazardous Area Certification...................................................................................3
Intrinsic Safety.........................................................................................................4
Chapter 3 Basics of Checkmate DL ..................................................5
Contents and Unpacking........................................................................................5
Battery Installation..................................................................................................5
Checking Battery Status.........................................................................................6
Standby Screens of Checkmate DL.......................................................................7
Available Memory Space and Standard Time Zone...............................................7
Checkmate DL Keypad..........................................................................................8
Checkmate DL Firmware Version..........................................................................8
Standby Display Screens for Microcor and Corrdata Systems..............................9
Chapter 4 Initializing Checkmate DL to Work with Corrdata System ..11
Configuring Checkmate DL for Corrdata Systems...............................................11
Setting the Time and Date...................................................................................11
Setting the Engineering Units..............................................................................12
Clearing Memory on Checkmate DL....................................................................13
Changing the Communication Baud Rate............................................................13
Chapter 5 Configuring Checkmate DL with RDC/ER-210 Configuration ...15
Import RDC/ER-210 Configurations to Checkmate DL using a PC and Corrdata Plus.......15
Manually Set RDC/ER-210 Configurations to Checkmate DL................................16
ii TABLE OF CONTENTS
Chapter 6 Configuring a RDC/ER-210 Using Checkmate DL ...................25
Setting the Date and Time on RDCs/ER-210s.....................................................25
Configure a RDC/ER-210 using the Checkmate DL..............................................26
Updating RDC/ER-210 Configuration upon Probe Replacement...........................28
Configuration of 4 Channel RDC..........................................................................29
Chapter 7 Reading a RDC/ER-210 with the Checkmate DL .....................33
Data Collection from a RDC/ER-210 .....................................................................33
Reading the RDC Configuration Details...............................................................34
Reading the Programmed Date and Time on the RDC........................................35
Perform a “Test Read” on a RDC.........................................................................36
Display the “Test Read” Results...........................................................................37
Chapter 8 Displaying RDC/ER-210 Data on the Checkmate DL ...............39
Chapter9 TransferringRDC/ER-210 Data tothePC..................................41
Corrdata Plus Installation....................................................................................41
Configuring Corrdata Plus...................................................................................41
Connecting the Checkmate DL to the PC............................................................41
Checkmate DL Data Transfer Procedure.............................................................41
Chapter 10 Initializing Checkmate DL for Microcor Systems ..................45
Configuring Checkmate DL for Microcor Systems.............................................45
Setting the Time and Date.................................................................................45
Clearing the Checkmate DL Memory.................................................................46
Chapter 11 Configuring and Programming Microcor Data Loggers ....47
Set Data Logger Configurations to Checkmate DL and Program Data Logger.........47
Set Data Logger Time.......................................................................................48
Chapter 12 Reading a Data Logger with the Checkmate DL ...................49
Read Data Logger Configuration and Status...................................................49
Reading / Clearing Data from Microcor Data Loggers.....................................49
CHECKMATE™ DL iii
Chapter 13 Transferring Data Logger Data to the PC ............................53
Microcor Tools Installation....................................................................................53
Configuring Microcor Tools...................................................................................53
Connecting the Checkmate DL to the PC.............................................................53
Checkmate DL Data Transfer Procedure..............................................................53
Chapter 14 Troubleshooting Guide ..........................................................57
Appendix A EC Type Examination Certificate ..........................................59
Appendix B Interconnect Diagram Drawing.............................................63
iv TABLE OF CONTENTS
CHECKMATE™ DL i
FIGURES and TABLES
Figure 1.1 Checkmate DL Instrument ....................................................1
Figure 1.2 Checkmate DL Instrument Specifications .........................2
Figure 3.1 Battery Cover of Checkmate DL Instrument .....................6
Figure 3.2 Checkmate DL Function Keys .............................................8
Table 5.1 CORROSOMETER and CORROTEMP Probe Types and Spans 23
Table 5.2 Alloy Multipliers .................................................................24
Figure B.1 Interconnect Diagram Drawing ..........................................63
ii FIGURES AND TABLES
CHECKMATE™ DL 1
Introduction CHAPTER 1
The Checkmate™ DL handheld instrument is the convenient and hassle-free way
to program and collect data from Microcor Data Loggers or Corrosometer and
Corrater Remote Data Collectors (RDCs). Checkmate DL can be programmed to
operate with either technology with only a few keypad entries. This portable unit
can store readings of up to 50 different Microcor Data Loggers or Corrosometer
and Corrater RDCs. The intrinsically safe communication between the
instrument and Data Loggers or RDCs enables the user to collect data without
moving the Data Logger or RDC to a safe area. Furthermore, the Checkmate
DL makes transferring stored data to a PC a much simpler process than before,
using the Corrdata Plus® Corrosion Management Software or the Microcor Tools
Software. Refer to Appendix A for Typical System Configuration.
Figure 1.1 Checkmate DL Instrument
2INTRODUCTION
Figure 1.2 Checkmate DL Instrument Specifications
Table des matières
