Cornwell Tools CTGPL Manuel utilisateur

CTGPL 8/4/14

CTGPL

26 LED

Pivot Work Light

Instructions • Warning Information

Main Work Light LED .................................... 21

Base Light LED ......................................... 5

Main Work Light Lumens ........................... 60 Lumens

Base Light Lumens................................ 15 Lumens

Rechargable Battery........................3.6V 1600m Ah Ni-Mh

Runtime approximately...............................4-5 hours

Recharging time approximately ..........................5 hours

SPECIFICATIONS

Always read instructions

before using tools

Always wear

safety goggles

WARNING

CTGPL 2 8/4/14

THIS INSTRUCTION MANUAL CONTAINS IMPORTANT SAFETY INFORMATION. READ THIS INSTRUCTION

MANUAL CAREFULLY AND UNDERSTAND ALL INFORMATION BEFORE OPERATING THIS TOOL.

• It is the responsibility of the owner to make sure all personnel read this manual prior to using the device.

It is also the responsibility of the device owner to keep this manual intact and in a convenient location

for all to see and read. If the manual or product labels are lost or not legible, contact Cornwell Tools®

for replacements. If the operator is not fluent in English, the product and safety instructions shall be read

and discussed with the operator in the operator's native language by the purchaser/owner or his

designee, making sure that the operator comprehends its contents.

• Whenusingthisproduct,basicsafetyprecautionsincludingthefollowingshouldalwaysbefollowedtoreduce

risk of fire, electric shock, personal injury and material damage.

• Alwayswearimpact-resistanteyeandfaceprotectionwhenoperatingorperformingmaintenanceonthistool.

•Keepthetoolinefficientoperatingcondition.

• Donotuseorchargethelightwhenthetemperatureisover104°F(40°C)orlowerthan-4°F(-20°C).

•Donotstorelightattemperatureabove120°F(49°C).

• Donotputtheworklightnearover-heatedobjects.

• Keepawayfromacidandalkalineobjects.

•Donotoperatelightinexplosiveatmospheres,suchasinthepresenceofflammableliquids,gasesordust.

Lights create sparks which may ignite the dust or fumes.

• Avoidbumpsanddropping.

•Batterypackspresentariskoffire,explosionandelectricshockwhichcancausepersonalinjury

• Thisunitisnotwaterproofandisnotintendedforuseinshower,sauna,orinpotentiallywetlocations.Always

keep this unit away from sink, tub, shower and etc.

• Thisunitisintendedforgeneralindooruseonly.

• Keepoutofreachofchildren.

• Donotlookdirectlyintothelightduringoperationoftheunit.Thiscanbeharmfultotheeyesevenforabrief

period due to intense light.

• Chargebatterypackonlywithchargerprovided.Othertypesofbatteriesmayburst,causingpropertydamage

and personal injury.

•Donotdiscardusedbatteries–returnthemtoyourlocalrecyclingproviderforrecycling.

• CAUTION: Magneticforcescanbeharmfultopersonalpropertyandequipmentincludingcellphones,

computers,diagnosticequipmentandcreditcards.

•ThisproductmaycontainoneormorechemicalsknowntotheStateofCaliforniatocausecancerandbirth

defects or other reproductive harm. Wash hands thoroughly after handling.

•Failuretoheedanyofthesewarningsmayresultinpersonalinjuryand/orpropertydamage.

FAILURE TO OBSERVE THESE WARNINGS COULD RE SULT IN IN JU RY.

WARNING

CTGPL 3 8/4/14

CTGPL

26 LED

Pivot Light

Ref. # Item # Description Qty

 1 CTGPL PivotLight 1

 2 CTGPLH Hanger/Hook 1

 3 CTGPLENS LensCover 1

 4 CTGPLCHACA ACCharger 1

 5 CTGPLCH12 DCPortableCharger 1

Alsoavailable:RSCTGPLWLWarningLabel

CTGPL 4 8/4/14

Routine Maintenance

Battery Pack-Once in every three months, remove the

battery pack from the work light and visually inspect

for signs of gas or chemical leakage. If any signs are

observed the battery pack should be removed from

service to prevent chemical damage to inside the work

light.

• Remove dirt and grease as soon as it accumulates.

Use a soft, damp cloth and a mild soap.

•NEVER submerge any part of the light in any solution

to clean it.

• DO NOT USE solvents such as gasoline, turpentine,

etc. to clean the unit.

Mounting the charger

AC and DC power cords are available. To charge the

work light, switch off and insert the charge plug ﬁrmly

into the work light receptacle. Connect the charger to an

appropriate power source.

AC Charging Adaptor

Connect the adaptor cord to the work light charging

receptacle, only with the AC power source in the

“OFF”position.Otherwise,itmayresultin the damage

of the recharging system. Refer to speciﬁcations for

detailsregardingchargingtime.ThereisindicatoronAC

charger. When the indicator changes from red to green,

pull the charger plug out and store properly.

Installing the DC Option

TheDCAdaptorisofferedasanoptionforthosewholike

to mount 26 LED Pivot Work Light system in their vehicles.

When installing or using the 26 LED Pivot Work Light in a

vehicle, always make sure that the work light case does

not touch the chassis. This can result in damage to the

work light.

PlugtheDCpowercordAdaptorintothecigarettelighter

receptacle of the vehicle. Do not leave adaptor plugged

inforanyextendedperiodwhileengineis“OFF”toavoid

draining battery.

Operation

1. Depresstheupperswitchforworklight

2. Depress the lower switch for base light

Warranty

LIMITED12-MONTHWARRANTY

Cornwell Tools warrants to the original purchaser that the company’s 26 LED Pivot Work Light are free from defects in

material or workmanship during the one year warranty period. We will replace any 26 LED Pivot Work Light which fails to

give satisfactory service due to defective workmanship or materials for 12 months from the date of original purchase.

Products must be returned with proof of purchase, to an authorized Cornwell dealer.

Thiswarrantyexcludes26LEDPivotWorkLightwhichhavebeensubjectedtoabnormaluse,accident,neglect,orlackof

maintenance.Anymodification,disassemblyofthis26LEDPivotWorkLightorrepairbyanunauthorizedservicecenterwill

void the warranty.

Thiswarrantygivesyouspecificrights.Youmayalsohaveotherrightswhichvaryfromstatetostate.

The foregoing obligation is Cornwell Tools' sole liability under this or any implied warranty and under no circumstances shall

CornwellToolsbeliableforanyincidentalorconsequentialdamages.

Note:Somestatesdonotallowtheexclusionorlimitationofincidentalorconsequentialdamagessotheabovelimitation

orexclusionmaynotapplytoyou.

Table des matières

Autres manuels Cornwell Tools Lampe de travail

Cornwell Tools

Cornwell Tools CTGAL350 Manuel utilisateur

Manuels Lampe de travail populaires d'autres marques

ANSMANN

ANSMANN POWERLIGHT 5.1 Manuel utilisateur

RTRMAX

RTRMAX RTX1868 Manuel utilisateur

FeinTech

FeinTech LAL00220 Manuel utilisateur

Bunker Hill Security

Bunker Hill Security 64735 Manuel utilisateur

Goobay

Goobay 30450 Manuel utilisateur

REV Ritter

REV Ritter SPOT Manuel utilisateur

Ignition

Ignition Stagepix Line 100 IP Manuel utilisateur

SCANGRIP

SCANGRIP DUO CONNECT Manuel utilisateur

Bosch

Bosch GLI 18 V Manuel utilisateur

Bayco

Bayco SL-1514 Manuel utilisateur

EUFAB

EUFAB SMD LED 8+1 Manuel utilisateur

DeWalt

DeWalt DCL510 Manuel utilisateur

PowerSmith

PowerSmith PWLD080T Manuel utilisateur

MaxLite

MaxLite 73683 Manuel utilisateur

Heitronic

Heitronic Trend 27867 Manuel utilisateur

Monzana

Monzana Gore MZCL10 Manuel utilisateur

EINHELL

EINHELL TE-CL 18/2000 LiAC Manuel utilisateur

Bayco

Bayco NIGHTSTICK Dual-Light Xtreme Lumens... Manuel utilisateur