Cornelius Nordic CCM1030 Manuel utilisateur

ED/DF300 30” CCM330/430/530/630/830/1030 Nordic Style Lid Kit Installation Instructions

INSTALLATION INSTRUCTIONS

ED/DF300 30” CCM330/430/530/630/830/1030 NORDIC BLACK/GRAY

STYLE LID KITS

This Nordic style kit applies to the Cornelius 30” wide CCM330/430/530/630/830/1030 ice maker.

WARNING:

Disconnect power to the unit before installing the adaptor following all lockout/tag out procedures established by the

user. Verify that all the power is off to the unit before performing any work.

Failure to comply could result in serious injury, death or damage to the equipment.

WARNING:

All ice baffle plates and bin stats, if included or recommended in this kit, must be installed as directed in this manual or

the equipment manufacturer’s instructions.

Failure to comply could result in serious injury, death or damage to the equipment.

WARNING:

All of the attachment screws and plates must be installed as directed in this manual.

Failure to comply could result in serious injury, death or damage to the equipment.

WARNING:

The dispenser must be secured with 3/8-16 bolts (6) to the counter before installing this Ice Maker Adapter Kit. Refer

to the installation manual and Figure 3 for the counter mounting template.

NOTE: Adjust the automatic agitation timer located in the dispenser’s electrical control box to 5 sec-

onds on, 20 minutes off. Access to the timer is provided by removing the merchandiser/upper

front panel.

1. Unpack the kit.

2. Remove the two (2) screws from each side of the dispenser cabinet and the plastic hopper covers (2) that were

shipped with the unit.

3. Place the adapter lid on the unit and use the four (4) screws that were removed to fasten the lid in place.

4. Install the ice baffle on the lid assembly as shown in Figure 2.

Table 1. Supplied Loose Parts

Item No. Part No. Name Qty.

1 15209 Adapter Lid 1

222127 Bracket 2

350904 RTV 1

452946

52964

Cover, Gray

Cover, Black 1

591957 Label 1

6620042919 Baffle, Ice 1

770226 #10 x 3/4” Sheetmetal Screw 12

8620701902 Acorn Nut, 8--32 Nylon 4

9620701901 Sealing Washer 4

10 611701903 #8 Nylon Washer 4

11 15192 Lid Opening Cover (For 22–inch Wide Icemakers) 2

12 630500109 Bin Stat 1

Release Date: November 4, 2010 www.cornelius.com Revision: B

ED/DF300 30” CCM330/430/530/630/830/1030 Nordic Style Lid Kit Installation Instructions

IMPORTANT: The baffle prevents ice from over–filling the manual fill area during agitation/

dispensing with a full storage bin and forcing the manual fill cover off.

5. Seal the ice maker to the top of the dispenser after determining the correct location for the ice maker (see Figure 1).

A. Run beads of RTV around the opening in the lid and inside of the perimeter of the ice maker outline so

that the ice maker will set on the RTV.

B. Set the ice maker onto the lid and position it as required.

C. Wipe away the excess RTV.

6. Drill 0.136” diameter holes into the ice maker cabinet and the dispenser lid using the ice maker mounting brack-

ets as templates. USE CAUTION SO AS NOT TO DRILL INTO ANY ICE MAKER COMPONENTS (CON-

DENSER, TUBING, ETC.). Secure the brackets using the #10 sheet metal screws provided.

7. Install the wire form bracket, supplied with the bin stat kit (item 4), through the 5/8” diameter hole in the bottom of

the ice maker. Wrap the eye of the wire form over the stud near the hole to the end of the wire form bracket and

wrap the tube around the end of the bracket several times, insuring the tube is secure.

NOTE: The bin stat must not interfere with the agitator rotation or in the path of ice falling from the ice-

maker. If it interferes with the agitator or in the path of ice, bend the bracket out of the way.

8. For 22–inch wide ice makers, locate the lid opening covers (2) (item 11) as shown in Figure 1. Secure the covers

to the adapter lid by drilling 0.136” diameter holes into the lid. Use the covers as templates to locate the mounting

holes. Secure the covers with the # 10 sheet metal screws.

9. Locate the cleaning caution label (item 5) on the manual ice fill cover (item 4) as shown in Figure 1. Place the

manual fill cover in position over the flange on the lid assembly and the front access hopper opening.

10. The unit is now ready for operation.

Figure 1. ED/DF300 Kit

ED/DF300 30” CCM330/430/530/630/830/1030 Nordic Style Lid Kit Installation Instructions

Figure 2. ED/DF300 Kit Ice Baffle Installation

Figure 3 ED/DF300 Mounting Template

ED/DF300 30” CCM330/430/530/630/830/1030 Nordic Style Lid Kit Installation Instructions

Figure 4. Bin Stat

Figure 5. Detail X

FRONT PANEL OF ICE MAKER

REMOVED FOR CLARITY

SEE DETAIL X

IN FIGURE 3

DETAIL X

SCALE 0.580

NOTE: BINSTAT MUST BE WRAPPED AROUND SUPPORT AS SHOWN.

BINSTAT COIL

SUPPORT

NOT SUPPLIED

WITH BINSTAT

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Cornelius Machine à glaçons

Cornelius

Cornelius UCR 700 Series Supplément

Cornelius

Cornelius 1400 Series Guide de configuration

Cornelius

Cornelius TS-061 Manuel de l'opérateur

Cornelius

Cornelius AC-300 Manuel utilisateur

Cornelius

Cornelius CMP 600-30 Manuel utilisateur

Cornelius

Cornelius ED150 "K" Style Lid Kit Manuel utilisateur

Cornelius

Cornelius Xtreme ICE Series Manuel du propriétaire

Cornelius

Cornelius CCM0330 Guide d'installation et d'utilisation

Cornelius

Cornelius UC150 ICE ONLY Manuel utilisateur

Cornelius

Cornelius IMD GLACIER 500-30 Manuel utilisateur

Cornelius

Cornelius Hoshizaki KM250 Manuel utilisateur

Cornelius

Cornelius TS-061 Manuel de l'opérateur

Cornelius

Cornelius Ice Cube Maker JEACS50SL1 Manuel utilisateur

Cornelius

Cornelius CCM330 Manuel utilisateur

Cornelius

Cornelius P/N 620204721 Manuel utilisateur

Cornelius

Cornelius P/N 629083202 Manuel utilisateur

Cornelius

Cornelius SERIES 750 (R404a) Manuel utilisateur

Cornelius

Cornelius Flavor Fusion 620053922 Manuel utilisateur

Cornelius

Cornelius NORDIC CHD22 Manuel utilisateur

Cornelius

Cornelius I Series Guide d'installation

Cornelius

Cornelius CHD22 Manuel

Cornelius

Cornelius IDC 2XX Manuel utilisateur

Cornelius

Cornelius IMD300-15A Manuel utilisateur

Cornelius

Cornelius I Series Manuel utilisateur

Manuels Machine à glaçons populaires d'autres marques

Hoshizaki

Hoshizaki KMD-460MWJ Manuel utilisateur

Sub-Zero

Sub-Zero 315I Instructions d'utilisation

Unold

Unold 48945 Manuel utilisateur

Kenmore

Kenmore 2217402A Manuel utilisateur

GE XPIO43SCSS Manuel utilisateur

Hoshizaki

Hoshizaki KMD-901MAH Manuel utilisateur

Whynter

Whynter FIM-450HA Manuel utilisateur

U-Line

U-Line UMCR014-SC01A Manuel d'installation

Andrew James

Andrew James AJ000522 Manuel utilisateur

Scotsman

Scotsman CME1356 Manuel utilisateur

Scotsman

Scotsman ACM 25 Manuel utilisateur

Kärcher

Kärcher IP 120 Manuel utilisateur

U-Line

U-Line SS1095 Manuel utilisateur

Maytag

Maytag MIM1554WRS - Ice Maker Manuel utilisateur

Hoshizaki

Hoshizaki KM-630MAH Manuel utilisateur

Princess

Princess Yonanas Manuel utilisateur

Unold

Unold 48946 Manuel utilisateur

Electrolux

Electrolux E15IM60GP Manuel utilisateur