Copytrax DaVinci Pro 6-6W Manuel utilisateur
Version 1.0 26/09/2012 First Release JR
Version 1.1 18/01/2013 Updated JR
Version 1.2 20/02/2013 Updated JR
Version 1.3 01/04/2014 Updated JR
WARNING
To avoid electrical shock hazard s, unit covers should only be
removed by authorised personnel.
©
COPYRIGHT
This document is the property of Copytrax Technologies UK Ltd and
it may not be reproduced, copied or exhibited without permission
from Copytrax.
ENVIRONMENTAL PROTECTION
Waste electrical products should not be thrown away with household
waste. Please recycle where facilities exist or call us and we can
arrange collection (Uk only) and disposal.
Copytrax reserve the right to amend or modify the specifications and design criteria
applying to these products.
DaVinci Pro 6-6W CD printer.
Contents.
Unpacking.
Preparing the ink Tanks.
Installing the ink system.
Setting up.
Space to work.
Connecting the cables.
Fitting the input guide.
Fitting the output support.
Connection and software
installation(windows).
Connection.
Installing the printer driver.
Connection and software
installation(Macintosh).
Connection.
Installing the printer driver.
Printer installation.
Control panel functions.
Discus setup
Discus installation.
Discus Quick start
Quick start.
Discus Image Import
Importing an image into Discus.
Printing Quick Start
Quick print setup.
Printer settings (Advanced).
Changing the printer settings for CD
printing.
Setting the print area.
Optimizing print quality.
Printing software & template.
Image software.
Printing CDs.
Positioning the CD tray.
Loading the tray with Cds.
Adjusting the fit of the CD.
Printing.
Ink Filling
Error Indications.
Warranty & Support
DaVinci Pro 6-6W CD printer.
Unpacking.
1. Unpacking.
Prepare a clean area of desk space to unpack the printer parts.
Check that all of the parts shown are included in the box.
Note.
*Ink system design may vary from picture.
**Free bundled image software may vary, depending on stock at time of order/shipping.
Do not discard the box but store it safely in case the printer should ever need to be returned for any
reason.
Printer Input guide Output support
CD tray
Packing checklist
Bulk ink system (CISS)*
Already fitted
Image software**
Printer driver
User manual
Mains cable
USB cable
Reset Utility
12
34
56
78
Foam packaging removed ready for ink installation. Carefully lift the supply bottles out of the cradle.
Remove the bubble wrap from the supply bottles. Peel off the packing tape from the top of the supply bottles .
Make sure all plugs are closed. Tip the supply bottles forward to fill the front
compartment with ink .
DaVinci Pro 6-6W CD printer.
Ink System Installation.
The rear section of the supply bottles should now have
a small air gap (necessary for normal operation). Open the smaller plugs for each colour.
Insert the six supplied air filters.
Open the top lid of the printer and remove the
packing tape from the top of the cartridges.
The printer will start up and show an
‘ink out’ led indication. Press the ink button.
Connect the power lead to the printer and press the power
button on the keypad. .DO NOT CONNECT THE USB CABLE YET
Place the supply bottles back into the cradle
910
11 12
13 14
15 16
DaVinci Pro 6-6W CD printer.
Ink System Installation continued.
The cartridge carriage will stop in the
‘change cartridge’ position.
Carefully lift the six cartridges.
Tip the six cartridges as shown above. Move the six cartridges to the left of the carriage and
remove the two strips of packing material.
Refit the six cartridges into the carriage Press down on each of the six cartridges until you hear a
‘click’ sound from each cartridge.
When each cartridge is installed properly
the clips are locked in place.
Press the ink button. The carriage should return to its home
position and all ink lights will go out.
Ink system installation is now complete
17 18
19 20
21 22
23 24
DaVinci Pro 6-6W CD printer.
Ink System Installation continued.
Mains USB
DaVinci Pro 6-6W CD printer.
Setting up.
1. Space to work.
Prepare an area of desk space to set up the
printer. A space of 135cm wide x 62 cm deep
is required.
The desk should be stable and level, in a
place free from dust, humidity, movement,
vibrations and away from direct sunlight.
Place the printer in the centre of the desk
space with the control end of the printer
nearest the front of the desk.
When using the printer you will be working
from the side of the printer and not from the
front as desktop printers are conventionally
used.
2. Connecting the cables.
Move the input guide aside. Do not connect
the mains cable to the mains supply at this
point, but plug it into the rear of the printer.
Plug the USB cable into the rear of the
printer.
3. Fitting the input guide.
Locate the 2 pins on the underside of the
input guide into the location holes on the
metalwork on the rear of the printer.
Ensure that the input guide is sitting level on
the desk top and that the cables pass through
the opening in the side of the input guide and
are not trapped underneath it.
4. Fitting the output support.
Locate the 2 pins on the end of the output
support & fit them into the 2 location holes in
the front of the printer body.
Ensure that the support sits level on the
desktop and nothing is trapped underneath it.
Input guide
Output support
Pins under
input guide
input guide
Location holes
Pins
1
2
3
4
Output support
DaVinci Pro 6-6W CD printer.
Connection and software installation .(Windows)
1. Connection.
Connect the USB cable to your PC.
Connect the mains plug to the mains supply.
If the printer comes on when you plug in the
mains cable turn it OFF by pressing the
on/off button.
2. Installing the printer driver.
After connecting the printer and PC you need
to install the printer driver from the suppled
DVD.
A. Make sure the printer is off, then turn on
your computer. Turn off any virus protection
software and cancel any set-up wizard or the
‘New hardware found’ window if it has
opened.
B. Insert the printer software DVD. If the
Installer dialog box does not appear click on
‘my computer’, click on the DVD rom icon,
then click ‘open’. Then double-click on
Autorun.exe.
C. Select ‘Install Driver & WiFi Setup’. WiFi
setup is optional and requires an available
wireless network.
D. The driver installation setup will open.
Agree to the Terms and Conditions and select
‘Next’ to continue the installation.
ON/OFF
Table des matières
Autres manuels Copytrax Imprimante
