COP Security CIR-UW34WP Manuel utilisateur
ITEM №: CIR-UW34WP
Caution for Installation
1. Resistor A: If you want to change the intensity of the IR light, please open the
cover at the bottom of the camera(As showed in the following picture), you can
adjust the IR light intensity.
2. Resistor B: If you want to change the working time of IR Led, please open the
cover at the bottom of the camera(As showed in the following picture), you can
adjust the IR LED working time.” – “refers to the IR LED will start working under
the darker situation. “+” refers to the IR LED will start working under the brighter
situation.
Packing
1. Camera X1
2. User Manual X1
3. Screw X4
4. Plastic-Conical-Anchor X4
5. Mounting drawing paper X1
6. Hexagonal Wrench X1
7. DC Connector X1
Specification
ITEM
CIR-UW34WP
IP Rating
IP66
Type
Colour/Monochrome
Signal System
NTSC/PAL
Pick Up Device
1/3" Sony Colour High Resolution CCD
Picture Elements
NTSC:811H×508V; PAL:795H×596V
Resolution
550TVL
Min Illumination
0Lux（80 Pieces IR LED ON）
Vertical Frequency
NTSC:60Hz; PAL:50Hz
Horizontal Frequency
NTSC:15.734KHz; PAL:15.625KHz
Clock Frequency
NTSC:28.636MHz; PAL:28.375MHz
Scanning System
2:1 Interlace
S/N Ratio
≥50dB
Electronic Shutter
NTSC:1/60-1/100,000s; PAL:1/50-1/100,000s
Lens
9-22mm Varifocal Auto iris IR Lens
White Balance
AUTO Tracking
Back Light
ON
Auto Gain Control
ON
GAMMA
0.45
Video Out-put
1V p-p,75Ω
Power Supply
DC12V ±10%
Current Consumption
200mA(Max)
IR Effect Distance
2~15m （6.56~49.18ft）(Outdoor)
Dimension
325×196×124mm (12.80”×7.72”×4.88”)
Weight
1920g (67.72oz)
Storage Temperature
-30～+60℃(-22～+140℉)
Operating Temperature
-30～+40℃(-22～+104℉)
Remark:Non-regulativeadaptormay cause camera damaged.
Number Plate Capture Camera
Caution for Installation
1. Please do not install the camera where the vibration always happens, or the
camera will be damaged.
2. Please keep the glass in front of the camera clean. Do not touch it directly. You
can use a soft cloth with alcohol to wipe if necessary.
3. The available IR range of this camera is shown in the specification. Please be
sure to place the camera in the working distance when it works.
4. In order to prevent short circuit, please do not loosen any screws in the
camera at random.
5. Please do not let the camera work in the conditions which is beyond the most
extreme and demanding of operating conditions and climates shown in the
specification. When any abnormalities happen, please turn off the camera and
contact your local dealer or us right away.
Pay attention to the setting angle. The picture in the right is for your reference.
Autres manuels COP Security Caméra de sécurité
COP Security
COP Security 15-CA25D Manuel utilisateur
COP Security
COP Security 15-CD53 Manuel utilisateur
COP Security
COP Security 15-CD455 SERIES Manuel utilisateur
COP Security
COP Security 15-CD51H Manuel utilisateur
COP Security
COP Security 15-CD53 Manuel utilisateur
COP Security
COP Security 15-DECA22C-IP Manuel utilisateur
COP Security
COP Security 15-CD66WIB Manuel utilisateur
COP Security
COP Security 15-CD35F Manuel utilisateur
COP Security
COP Security 15-CD55TWAI Manuel utilisateur
COP Security
COP Security 15-CD43RVB Manuel utilisateur
