COP Security 15-CA25D Manuel utilisateur

15-CA25D / 15-CA25DNV

INSTRUCTION MANUAL

OVERVIEW

The CA25D/CA25DNV are medium resolution colour camera. Both

cameras built in an advanced DNR system (Digital Noise Reduction).

DNR can significantly reduce the image noise under low light

conditions. Especially with the Auto Gain Control switched on (AGC

on).

FEATURES

•1/3” SONY SUPER HAD CCD

•LOW POWER CONSUMPTION

•DUAL POWER SUPPLY (12vDC or 24vAC)

•HI SENSITIVITY

•HI SPEED WHITE BALANCE MODE

•BUILT-IN DSS-DIGITAL SLOW SHUTTER FUNCTION

•BUILT-IN DNR-DIGITAL NOISE REDUCTION FUNCTION

•TWISTED PAIR INTERFACE

•C/CS LENS MOUNT-BACK FOCUS ADJUSTABLE

PRECAUTION

Do not open or modify

Do not adjust or modify the camera’s internal circuits or power supply

modules, as it may be dangerous and cause damage to the unit. For

internal settings and repairs, consult our dealer.

Do not put objects inside the unit

Make sure that no metal objects or flammable substance get inside

the camera that may cause damage to the unit. If water or a liquid get

inside the camera, disconnect the power cable immediately, and

consult your dealer. Be careful to protect the camera from direct

exposure to weather, rain, etc.

Be careful when handling the unit

Do not drop the camera or subject it to strong shock or vibration.

Install away from electric or magnetic fields

It may interfere with or distort the image when install close to an electric

or magnetic fields. Ex: TV, Speaker, etc.

Protect from humidity, dust and high temperatures

Do not install it where there is greasy smoke or steam, where the moisture may

get too high, or where there is a lot of dust...

Do not install close to stoves, or other heat generating devices, such

as spotlights, etc….

Avoid places where there is direct sunlight.

Cleaning

Do not directly touch the CCD element. If necessary, use a soft cloth

moistened with alcohol to wipe off any dust.

INSTALLATION

Auto Iris Lens

1. Remove the protective cap from the camera’s lens mount.

2. Carefully align the CS/C lens into the camera lens mount and turn

clockwise slowly until it is firmly attached.

3. Insert the cable Plug into the lens terminal socket located behind

of the camera body.

4. For IRIS connector details see the following table

Manual Iris Lens

1. Remove the protective cap from the camera’s lens mount.

2. Carefully align the CS/C lens into the camera lens mount and turn

clockwise slowly until it is firmly attached.

POWER SUPPLY

1. Before turning on the power to the camera, ensure that the lens is

fitted onto the camera to avoid damage to the exposed CCD

chipset.

2. You can use a DC12V or AC24V power supply for the camera.

CONNECTION

1. Connect the video and Audio outputs of the camera to the video /

Audio inputs of a monitor or DVR.

2. Connect power supply to the power input on the camera then turn

on the power.

3. Adjust the lens and camera’s setting to get the best image.

IRIS JACK DC-LENS

P1 DUMP-

P2 DUMP+

P3 DRIVE+

P4 DRIVE-

DIMENTION & FUNCTION CONNECTOR

1. Auto iris lens connector (4-pin type)

The lens connector supplies the auto-iris lens (not supplied) with

DC power and DC control signal.

2.DIP switch function

Sw1 . BLC (Back light compensation) mode switch:

When strong light is present behind the object being viewed, the

object will appear dark. In this case, put this switch in the BLC

position.

Sw2. AI/AE switch:

AE (Auto Electronic Shutter) For fixed or manual Iris lens

AI (Auto Iris) For auto Iris lens.

Sw3. ATW / AWB switch

The ATW mode automatically adjusts white balance according to

changes in lighting conditions (2,500K to 10,000K).

The AWB mode automatically or manually adjusts and locks the

white balance for specific lighting conditions.

Sw4. AGC switch

The AGC function adjusts the image sensor gain and will

enhance the low light capability of the camera, however under

extremely low light conditions the picture may become noisy.

Sw5. DSS switch

The DSS function allows the camera to use a slow shutter speed

in extremely low light conditions, this will enhance the low light

capability but fast moving objects may appear blurred in low light.

Sw6. H-Mir switch

The horizontal mirror function reverses the image creating a

mirror image.

3. Level

This is used to adjust video output level of DC driven auto iris

lens.

4. Power input

Connect the power supply of 24Vac or 12Vdc

5. Power input indicate

The led will light when power input.

6. Video output

This is the standard video output for connecting to a video

monitor, etc (75Ω).

7. Audio output

It is an output for connecting to audio equipment.

SPECIFICATION

MODEL 15-CA25D 15-CA25DNV

SENSOR / DSP 1/3 “ SONY SUPER HAD CCD

NUMBER of PIXELS NTSC:512x492 PAL:512x582

SCANNING 2:1 INTERLACE

SYNCHRONISATION INTERNAL

HORIZONTAL FREQUENCY NTSC:15.734 kHz PAL:15.625 kHz

VERTICAL FREQUENCY NTSC:59.94 Hz PAL:50 Hz

RESOLUTION 420 TV LINES

VIDEO OUT LEVEL 1.0Vp-p/75ΩVIDEO 0.714Vp-p Sync 0.286Vp-p

BURST Sync 0.286Vp-p

S/N 50dBMin.(γ,Aperture, AGC Correct OFF)

MINIMUM ILLUMINATION 1Lux/0.005Lux (DSS ON) 0.05Lux/0.005Lux (DSS ON)

Y CORRECTION 0.45

AGC +18dB Max.

IRIS CONTROL ELECTRICAL IRIS/Auto IRIS (DC LENS CONTROL)

ELECTRICAL SHUTTER 1/60(1/50)～1/120000 sec.

POWER SUPPLY VOLTAGE DC12V / AC24V

POWER SUPPLY CURRENT 150mA Max. (DC12V) / 60mA Max. (AC24V)

DIMENSION 58(W) X 62H X 118(L) mm

STORAGE TEMP. -30℃~60℃

OPERATING TEMP. -10℃~45℃

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.

OPERATI ONS I S SUBJ ECT TO THE FOLLOWI NG TWO

CONDI TI ONS :( 1 ) THI S DEVI CE MAY NOT CAUS E HARMFUL

I NTERF ERENCE AND (2 ) T HI S DEVI CE MUS T ACCE P T ANY

I NTE RF E RENCE RE CE I VE D. I NCL UDI NG I NT ERF E RE NCE

THAT MAY CAUSE UNDESIRABLE OPERATION. .

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels COP Security Caméra de sécurité

COP Security

COP Security 15-CD455 SERIES Manuel utilisateur

COP Security

COP Security 15-CO402IC Manuel utilisateur

COP Security

COP Security 15-CD453VBIC Manuel utilisateur

COP Security

COP Security 15-CD55TWAI Manuel utilisateur

COP Security

COP Security CIR-UW34WP Manuel utilisateur

COP Security

COP Security 15-CD53 Manuel utilisateur

COP Security

COP Security 15-CD51H Manuel utilisateur

COP Security

COP Security 15-CD66WIB Manuel utilisateur

COP Security

COP Security 15-CD53 Manuel utilisateur

COP Security

COP Security 15-CD43RVB Manuel utilisateur

COP Security

COP Security 15-DECA22C-IP Manuel utilisateur

COP Security

COP Security 15-CD35F Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur