Cooper Lighting Corelite Class R2R Manuel utilisateur

WARNINGS

1). WARNING! Risk of Electric Shock. Disconnect power at fuse or circuit breaker before

installing or servicing.

2). WARNING! - Risk of Fire/Electric Shock. If not qualiﬁed, consult an electrician.

3). WARNING! – Risk of ﬁre or electric shock. Luminaires wiring, ballasts, or other electrical

parts may be damaged when drilling for installation of reﬂector kit hardware. Check for

enclosed wiring and components.

NOTES

1). NOTE! - Reﬂector kit installation requires knowledge of ﬂuorescent lighting systems and

electrical systems. Install this kit only in the luminaires that have the construction features and

dimensions shown in the photographs and/or drawings.

2). NOTE! - This product must be installed in accordance with the applicable installation

code by a certiﬁed electrician, familiar with the construction and operation of the product

and hazards involved.

3). NOTE! - Only those open holes indicated in the photographs and/or drawings may be made

or altered as a result of kit installation. Do not leave any other open holes in an enclosure of

wiring or electrical components.

4). NOTE! - To prevent wiring damage or abrasion, do not expose wiring to edges of sheet

metal or any sharp objects.

5). NOTE! - DRY LOCATIONS ONLY

6). NOTE! - Disconnect all power before proceeding.

7). NOTE! - Remove all internal components from existing luminaire to be retroﬁtted - louvers,

lamps, ballast cover, ballast, socket tracks, lamp holders, and reﬂector from the housing.

Please dispose of lamps and ballasts properly, and recycle the other components, if possible.

Class R2R - 1, 2, or 3 lamp T5/T5HO recessed retroﬁt 2’x2’ / 2’x4’

INSTALLATION INSTRUCTIONS - page 1 of 2

Corelite 4675 Holly St. Denver, CO 80216 Ph. (303) 393-1522 Fax (303) 393-1477

ADE100076 rev 050410

4” min.

Ballast

4” max.

EQ

EQ

1. Unpack Class R2R Retroﬁt components.

3. Afﬁx ballast to the housing at least 4” from center of ﬁxture and 4” from power

line input location.

5. Prepare to install end brackets by sliding them into the ends of the housing.

2. After removing existing ﬁxture & components, remove backing from double-

stick adhesive on the R2R ballast.

4. Secure the ballast with the two captive self-drilling screws at each end.

6. Secure the end brackets with the two captive self-drilling screws at each end.

Ballast / Bracket Assembly

Lens

Reﬂector

Class R2R - 1, 2, or 3 lamp T5/T5HO recessed retroﬁt 2’x2’ / 2’x4’

INSTALLATION INSTRUCTIONS - page 2 of 2

Corelite 4675 Holly St. Denver, CO 80216 Ph. (303) 393-1522 Fax (303) 393-1477

ADE100076 rev 050410

9. Gently press the reﬂector up into the housing and against the contoured

brackets at each end. Continue to push the reﬂector in until it ﬁts into place

above the socket plates and lens holders at each end.

11. Install T5 / T5HO lamps.

10. Secure the reﬂector by tightening the captive mounting screw at each end.

12. Install the lens by pushing it up into the housing until it snaps into place

around the lens holders at each end.

7. Connect power input to ballast using supplied quick-connectors. Push stripped

wire leads from power input into open end of quick-connector.

8. Begin reﬂector installation by placing the reﬂector into the housing.

Autres manuels Cooper Lighting Équipement d'éclairage

Cooper Lighting

Cooper Lighting FW Series Manuel utilisateur

Cooper Lighting

Cooper Lighting IRIS E4RPINSR Manuel utilisateur

Cooper Lighting

Cooper Lighting COMBOLIGHT CR220M70 Manuel utilisateur

Cooper Lighting

Cooper Lighting MT250PC Manuel utilisateur

Cooper Lighting

Cooper Lighting Halo LF603 Manuel utilisateur

Cooper Lighting

Cooper Lighting Halo Lazer LZR305 Manuel utilisateur

Cooper Lighting

Cooper Lighting HALO RL6 Manuel utilisateur

Cooper Lighting

Cooper Lighting Corelite Continua SQ4 Manuel utilisateur

Cooper Lighting

Cooper Lighting Halo L650 Manuel utilisateur

Cooper Lighting

Cooper Lighting HALO LAZER LZR204 Manuel utilisateur

Cooper Lighting

Cooper Lighting W35HPC Manuel utilisateur

Cooper Lighting

Cooper Lighting Halo LZE800SL Manuel utilisateur

Cooper Lighting

Cooper Lighting SURE-LITES HR87 Series Manuel utilisateur

Cooper Lighting

Cooper Lighting Combolight Trimmed V90229-1T Manuel utilisateur

Cooper Lighting

Cooper Lighting PORTFOLIO CD61 Series Manuel utilisateur

Cooper Lighting

Cooper Lighting TQS1000 Manuel utilisateur

Cooper Lighting

Cooper Lighting AMETRIX ADY071480 Manuel utilisateur

Cooper Lighting

Cooper Lighting ADH080901 Manuel utilisateur

Cooper Lighting

Cooper Lighting Halo TGS3S401DSRB Manuel utilisateur

Cooper Lighting

Cooper Lighting WaveLinx Lite Manuel du propriétaire

Cooper Lighting

Cooper Lighting Halo Lazer LZR302 Manuel utilisateur

Cooper Lighting

Cooper Lighting MS185R Manuel utilisateur

Cooper Lighting

Cooper Lighting Halo Series Manuel utilisateur

Cooper Lighting

Cooper Lighting Sure-Lites SELDWA50PS Series Manuel utilisateur

Manuels Équipement d'éclairage populaires d'autres marques

Brizo

Brizo 8SP-MU-4 Manuel utilisateur

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuel utilisateur

IKEA

IKEA BJÖRKSPIREA Manuel utilisateur

Laserworld

Laserworld Evolution Series ES-400RGB Manuel utilisateur

Alien

Alien RG STAR Manuel utilisateur

EuroLite

EuroLite LED B-40 Manuel utilisateur

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuel utilisateur

Commercial Electric

Commercial Electric 54568141 Manuel utilisateur

CREE LIGHTING

CREE LIGHTING 304 Series Manuel utilisateur

Goobay

Goobay 49867 Manuel utilisateur

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuel utilisateur

Alkalite

Alkalite Krypton KT-81 Manuel utilisateur

Clas Ohlson

Clas Ohlson GU10 Manuel utilisateur

DTS

DTS DELTA 10 F Manuel utilisateur

ring

ring Solar Steplight Manuel utilisateur

One Stop Gardens

One Stop Gardens 57696 Instructions de montage

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuel utilisateur

SIREM

SIREM Swimeo A2 Manuel utilisateur