Coolmax F1-U2 Manuel utilisateur
XTreme Files OS & Data Backup/Restore User Manual
Please read the Instruction manual before using the XTreme Files (F Series)
1. The suggested interface for your computer is USB2.0 to have better speed and compatibility.
Please enter BIOS setup to set USB Legacy Support to Disabled in advance.
2. XTreme Files F Series supports Windows 2000 / XP. Please upgrade your OS to Windows
2000 & Windows XP if your original OS is Win 98 SE or Win ME.
3. XTreme Files F Series does not support MAC OS & Linux…non-Windows data backup.
4. Please remove other USB or 1394 external devices when performing the OS backup & restore functions
to assure normal operation.
5. We can regard XTreme Files F Series as a normal USB external device besides having the
backup and restore functions.
6. To assure the stability of USB signal quality, we suggest you connect XTreme Files F Series to a USB
slot of the motherboard close to the keyboard.
7. The XTreme Files's OS backup function can support the OS disk backup on one computer
only. It will cause data disorder if used on another computer.
CoolMax will not guarantee data correctness if you restore
the backed up OS to another computer.
8. To increase the efficiency and assure the data backup's
accuracy, please rearrange the computer system in advance
before performing the OS backup.
9. XTreme Files (F1) will backup your entire C:
Drive auto format & restore back to any HDD.
User's Agreement
1.1 Any reverse engineering, recompilation, and disassembly of the XTreme Files Drive software is
strictly prohibited.
1.2 The backup function of the software is allowed for one computer and one user. CoolMax will
not guarantee the integrity of the restored data if used on 2 or more computers.
1.3 The software should be bundled with the hardware provided by CoolMax. CoolMax will not
guarantee the compatibility of this software with other storage control hardware.
Index
1. Preface
2. Product Features
3. System Requirements
4. Outlook and Function
5. Hard Drive Assembly
6. Software Installation
7. Backup and Restore Function Procedure
8. Usage Notice
9. Problem Solving Q & A
Appendix A
Hard Drive Formatting
Appendix B
Remove XTreme Files Drive Steps
1. Preface
With the growing presence of information and the continuous increase of storage capacity, portable data and
the backup function are important day by day. The hard disk data are more important than the hard disk itself.
Therefore, CoolMax has designed the XTreme Files Drive (F Series) for you to move and back up important
data anytime.
2. Product Features
2.1 Easy operation: A finger's touch to automatically back up all data from computers.
2.2 Dual function: Portable and backup drive.
2.3 Intelligent backup: Automatically select the data under the user name for backup.
2.4 Flexible function: Select OS backup or data backup.
2.5 Automatically select all the data in the hard disk for the total backup (Windows folder and Program
Files folder will be excluded automatically from backup) and exclude the system files (.EXE, .COM,
.DLL, .TMP, etc.) to avoid affecting system setup and to save the hard disk space when restoring.
2.6 Bough formation selection: 3-way for backup - hard disk, folder, and file.
2.7 Automatically remembers the last selection for later backups. You can push the backup button directly (to save time).
2.8 My document and Desktop are the default selections.
2.9 Restores the data to the original folders after the restore function.
3. System Requirement
CPU Pentium III, AMD K7 or above
O.S Windows 2000/XP
CD-ROM 4X or above
RAM 64 MB
Interface USB 1.1 or USB 2.0
Accessories and information (pictures)
1. XTreme Files external case
2. XTreme Files (F Series) installation CD
3. Instruction manual
4. Data Transfer cable
5. Adapter ( 2.5" HDD is optional item)
4. Outlook and Function Introduction
1. OS backup button: This button will automatically back up your OS and all data to the XTreme Files Drive.
2. Data backup button: You can back up according to disk, directory, & file automatically or manually.
3. Restore button: You can select to restore all backed up data or to restore the data according to
your requirements.
P.S. The restore button will restore the data to the original folders.
4. USB 2.0 connector.
5. Power plug
6. Power indication light.
7. Disk access indication light.
DC Jack
On/Off switch
USB port
5. Hard Drive Assembly
(If you purchase the XTreme Files Drive together with a hard drive, please go to part 6)
1. Loosen the four screws from the side panel of the "X" metal tray, then remove the metal
1. 2.
2. Lay the hard disk inside the metal tray, making sure that the top of the hard disk is securely
positioned to the metal tray. Then fasten the screws to mount the device on the tray. (Please see picture 3)
3.
3. Connect the 4 pin power and the data cables to the hard disk. (Please see picture 4)
4.
2. Software Installation
* Please make sure you have finished the hard drive installation.
* If your OS is Windows 2000 or XP, please log onto the
computer under the "administrator."
* Please connect the XTreme Files Drive to the computer (with
hard drive installed), and then proceed to format the hard drive
first, then install the software. For details, please go to the end
of the manual for formatting information.
a. Please connect your XTreme Files Drive to your computer first.
Then insert the bundled CD into your CD-ROM. Please enter
the CD and left click twice on the SETUP .EXE.
4. After the hard disk has been installed, connect the side panel & metal tray, then fasten the four screws
securely on to the enclosure. (Please see picture 5)
5.
b. Just follow the on-screen instruction.
c. Please read the licensing agreement and click on "Yes", then the software will install automatically.
d. After the software is installed, the short cut will appear automatically.
The software icon will also appear in the lower right corner of the screen as shown below.
XTreme File
s
X
e. When the software icon is shown on the right, it means the XTreme Files Drive is connected to
the computer correctly.
f. When the software icon is shown on the right, it means the XTreme Files Drive is not
connected to the computer.
g. After the software installation is completed, please click on the short cut, or restart the
computer to start using the XTreme Files Drive.
h. When executing the XTreme Files Drive application software for the first time, the following image will
appear asking to install the XTreme Files Drive driver. Please press the <Continue Anyway> and wait
for about 1 minute for the system to install the XTreme Files Drive driver.
P.S. This system will not support Windows ME & Windows 98 SE. Please upgrade your system to
Windows XP or Windows 2000 for backup.
3. Backup and Restore Function Procedure
The Function Button
As the picture indicates,
X
X
X
XTreme Files
X
there are 3 buttons on the XTreme Files Drive:
OS backup, Data backup, & Restore.
A. OS Backup Button:
When pushing the OS backup button, the system will display the indication message (remark 1). After
pressing the "OK" button, the system will end Windows automatically and restart to DOS (remark 2), backing
up the OS of the hard disk together with the data of the system disk. (remark3)(remark4)
If the used disk space of the system disk is larger than the free disk space of the USB HDD, the backup will
fail due to insufficient disk space. We suggest you delete unnecessary files so that the free disk space of the
USB HDD is larger than or equal to the used space of the system disk.
The system automatically detects the XTreme Files Drive.
The XTreme Files Drive starts to back up the data of the system disk.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Coolmax UPS
Manuels UPS populaires d'autres marques
Pylontech
Pylontech Victron & Pylontech US5000 Manuel utilisateur
Tecnoware
Tecnoware EVO DSP PLUS MM 6.8 Manuel utilisateur
Mecer
Mecer ME-1000-WTU Manuel utilisateur
Mustek
Mustek PowerMust 530(B) Plus Manuel d'installation et d'exploitation
Emerson
Emerson Liebert NXL series Manuel utilisateur
MAKELSAN
MAKELSAN BOXER SERIES Manuel utilisateur
