Contemporary Controls CTRLink EIDX MP Series Manuel utilisateur

EIDX_MP Series

A Line of Managed PoE PSE Ethernet Switching Hubs

INSTALLATION GUIDE

INTRODUCTION

The EIDX_MP Series of managed Industrial Ethernet switches provides the user

with a sophisticated instrument with several advanced features for the

discriminating network professional. Each of the 8 models in the series operates

in extended temperatures while offering a choice of mounting, port count, media

support and 8 Power-Over-Ethernet ports (PoE).

To optimise speed and throughput, some functions are automatically negotiated:

Each twisted-pair port automatically optimises its data rate to 10 Mbps or 100

Mbps. The data rate of fibre ports is fixed at 100 Mbps.

Each port negotiates flow control — supporting the PAUSE function for full-

duplex links, and using the backpressure scheme for half-duplex segments.

All units offer non-blocking wire-speed operation with a maximum data rate of

148,810 frames per second for 100 Mbps Ethernet on all ports at full duplex.

Copper ports are wired MDI-X (internal crossover) for attaching NICs via straight-

through cables.

All units support SNMP and offer these advanced features:

RapidRing™ high-speed redundancy (link loss recovery under 300 ms)

VLANs to limit broadcast/multicast domains and improve performance

Trunking to allow high-bandwidth redundant backbones

QoS message priority for either port-based or MAC-based priority

Programmable fault relay to indicate the loss or addition of a link

Auto-MDIX for all copper ports enabled/disabled by software control

All units operate from low-voltage DC sources — and redundant power

connections are available for backup considerations. They come with the ability

for either DIN rail or panel mounting. The front panel features LED indicators

for power and CPU status — and link status, activity and data rate of each port.

TD071100-0IA

SPECIFICATIONS

Electrical (for 24-port models)

INPUT

Voltage: 48 VDC ±10%

Power (max): 135 W

PoE Output: 48 VDC, 15.4 W (max)

(per port)

Temperature

Operating: –40°C to +75°C

Storage: –40°C to +85°C

Shipping Weight

2 lbs. (.9 kg)

Regulatory Compliance

CE Mark; CFR 47, Part 15 Class A

UL508 Listed Industrial Control Equipment

(intended for use with Class 2 circuits)

Functional

Compliance: ANSI/IEEE 802.3

Data Rate: 10 Mbps and 100 Mbps

Signalling: 10BASE-T, 100BASE-TX,

100BASE-FX

LED Indicators

Power/48 V green

Status red/green

Ports green/yellow

Fault red

PoE Power green

Mechanical

Figure 1 — EIDX Dimensions

Warning: This is a Class A product. In a domestic environment the product may cause

radio interference in which case the user may be required to take adequate measures.

TD071100-0IA

RJ-45 Connector Pin Assignments

PIN MDI-X PoE

1 TD+ TD+

2 TD– TD–

3 RD+ RD+

4 unused +48 V

5 unused +48 V

6 RD– RD–

7 unused 48 V return

8 unused 48 V return

Figure 2 — RJ-45 Connector

TD071100-0IA

INSTALLATION

Mounting

The EIDX is designed for mounting in an industrial enclosure or wiring closet

using either set of the provided mounting hardware listed below:

TS-35 DIN Rail Mounting

Panel Mounting

DIN rail clip

Panel mounting bracket

M3x5 screws, flat-head (4)

For quick snap-mounting to 35 mm DIN rail, a reinforced DIN rail clip is pre-

attached to the back of the EIDX enclosure with four M3x5 flat-head screws. If

the clip is removed, the EIDX can be panel-mounted by extending the top and

bottom brackets which are shipped in retracted position. The extended brackets

can then anchor the EIDX to a wall or other flat vertical surface with two #8

pan-head screws (not provided). The left illustration of Figure 3 shows a rear

view of the EIDX with brackets in retracted position. The right illustration of

Figure 3 shows the brackets extended and secured to the EIDX enclosure with

the same screws used in retracted position.

Figure 3 — Using the Panel-Mounting Brackets

TD071100-0IA

Cabling Considerations

When attaching signal cables to the EIDX, Table 1 should be considered.

Medium

Signalling and

Data Rate

Minimum Required

Cable

Maximum Segment

Distance

Copper

10BASE-T

10 Mbps

Category 3 UTP

100 m (328 ft)

Copper

100BASE-TX

100 Mbps

Category 5 UTP

100 m (328 ft)

Fibre

100BASE-FX

100 Mbps

1300 nm, multimode

50/125 or 62.5/125 µm

Full-Duplex :

2 km (6562 ft)

Half-Duplex :

412 m (1352 ft)

Fibre

100BASE-FX

100 Mbps

1300 nm, single-mode

Full-Duplex :

15 km (49213 ft)

Half-Duplex :

412 m (1352 ft)

Table 1 — Cabling Considerations

Observe in Table 1 that segment distance is very limited when using copper

media — regardless of data rate. Although 10BASE-T links can successfully

use Category 3, 4 or 5 cable — 100BASE-TX segments must use Category 5.

A popular choice for improved distance is multimode fibre — which also gives

good electromagnetic noise immunity and optimum protection from lightning

strikes. Considerable distance can be achieved in full-duplex mode — and the

greatest distance can be realized in full-duplex mode with single-mode fibre.

Note that half-duplex operation yields a modest, fixed distance which does not

vary with the type of fibre in use. This is because half-duplex mode is limited

by the collision domain — irrespective of the length and type of fibre.

EIDX switches offer three types of field connectors. Copper ports accept RJ-45

modular plugs. Two choices of fibre connectors are available: ST and SC.

TD071100-0IA

Powering

The EIDX requires low-voltage DC power via a four-pin removable keyed

connector. Power conductors can be stranded (16–18 AWG) or solid (16–22

AWG). Consult the Specifications section for power requirements. The various

power options are explained below.

NOTE: This device is intended for use with Class 2 circuits.

DC Powered

The EIDX accepts a voltage of 48 VDC ±10% and draws current commensurate

with power consumption. Power conductors should be sized accordingly. COM

and the equipment chassis are isolated from zero volts. The input connections are

reverse-polarity protected.

Figure 4 — DC Powered Figure 5 — Redundant DC Powered

Redundant DC Powered

Redundant diode-isolated DC power inputs are provided so the EIDX can operate

despite the loss of primary power. Both sources must provide required power.

LED Indicators

Power — This LED glows green when proper power is applied to the EIDX.

Status — This bicolour LED will be green in an operational state and red in a

fault state. The green LED blinks periodically to indicate the management CPU

is fully operational.

Port — Each port has an associated bicolour LED which glows green when a

valid Ethernet link has been established at 100 Mbps but yellow if the data rate

is 10 Mbps. The LED flashes when data transfer is occurring.

PoE Power — This LED glows green when PoE power is being delivered to a

powered device (PD).

48V — This LED glows green when 48 VDC is present for the PoE ports.

Fault — This LED glows red to indicate an error condition on the PoE ports.

TD071100-0IA

Port Locations

Ports 1–8 are accessed on the front panel. Other ports

are located on the bottom of the enclosure — and

for 24-port models, also on the top surface.

On all models, PoE is provided on ports 9–16

which are on the bottom of the unit.

An example of port arrangement on the top and

bottom of the enclosure is shown in Figure 6

which locates a few of the ports on the model

EIDX24MP-100T/FC.

Fault Relay

This relay is disabled by default. Its operation is

explained in the Software Manual. Its contact is

normally closed and rated at 500 mA, 24 V (max).

Figure 6 — Port Locations

Console Port

The Console Port uses the standard RS-232 protocol for

configuring the switch. For proper communication :

Set the Baud rate to 9600.

Set the Data bits to 8.

Set the Parity to None.

Set the Stop bits to 1.

Set the Flow control to None.

Figure

7 — Console Port

TD071100-0IA

NEED MORE HELP INSTALLING THIS PRODUCT?

Additional information exists on our web site at www.ccontrols.com. When

contacting one of our offices, just ask for Technical Support.

WARRANTY

Contemporary Controls (CC) warrants its new product to the original purchaser for two

years from the product shipping date. Product returned to CC for repair is warranted for

one year from the date that the repaired product is shipped back to the purchaser or for

the remainder of the original warranty period, whichever is longer.

If a CC product fails to operate in compliance with its specification during the warranty

period, CC will, at its option, repair or replace the product at no charge. The customer is,

however, responsible for shipping the product; CC assumes no responsibility for the

product until it is received.

CC’s limited warranty covers products only as delivered and does not cover repair of

products that have been damaged by abuse, accident, disaster, misuse, or incorrect

installation. User modification may void the warranty if the product is damaged by the

modification, in which case this warranty does not cover repair or replacement.

This warranty in no way warrants suitability of the product for any specific application.

IN NO EVENT WILL CC BE LIABLE FOR ANY DAMAGES INCLUDING LOST

PROFITS, LOST SAVINGS, OR OTHER INCIDENTAL OR CONSEQUENTIAL

DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT

EVEN IF CC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES,

OR FOR ANY CLAIM BY ANY PARTY OTHER THAN THE PURCHASER.

THE ABOVE WARRANTY IS IN LIEU OF ANY AND ALL OTHER WARRANTIES,

EXPRESSED OR IMPLIED OR STATUTORY, INCLUDING THE WARRANTIES OF

MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE OR USE, TITLE

AND NONINFRINGEMENT.

Returning Products for Repair

Return the product to the location where it was purchased by following the

instructions at the URL below:

www.ccontrols.com/rma.htm

DECLARATION OF CONFORMITY

Information on the regulatory compliance of this product exists at the URL below:

www.ccontrols.com/compliance.htm

Table des matières

Autres manuels Contemporary Controls Changer

Contemporary Controls

Contemporary Controls EISX8M series Manuel utilisateur

Contemporary Controls

Contemporary Controls CTRLink EISK8-100T Manuel utilisateur

Contemporary Controls

Contemporary Controls EISK16-100T Manuel utilisateur

Contemporary Controls

Contemporary Controls EISW5-100T Manuel utilisateur

Contemporary Controls

Contemporary Controls CTRLink Skorpion Series Manuel utilisateur

Contemporary Controls

Contemporary Controls CTRLink EISK8P-GT Manuel utilisateur

Contemporary Controls

Contemporary Controls EISW Series Manuel utilisateur

Contemporary Controls

Contemporary Controls EISK5-100T/F Series Manuel utilisateur

Contemporary Controls

Contemporary Controls CTRLink EISK5-100T Manuel utilisateur

Contemporary Controls

Contemporary Controls CTRLink EISK8-GT/H Manuel utilisateur

Contemporary Controls

Contemporary Controls EISK5-100T/H Manuel utilisateur

Contemporary Controls

Contemporary Controls CTRLink EISK8M Series Manuel utilisateur

Contemporary Controls

Contemporary Controls CTRLink EISX9-100T Manuel utilisateur

Contemporary Controls

Contemporary Controls CTRLink EISC-100T Manuel utilisateur

Contemporary Controls

Contemporary Controls EISW8-100T Manuel utilisateur

Contemporary Controls

Contemporary Controls CTRLink EIBA5-100T Manuel utilisateur

Contemporary Controls

Contemporary Controls CTRLink EISK5-GT/H Manuel utilisateur

Contemporary Controls

Contemporary Controls EISK8-100T/F Series Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur