Contec FlexNetViewer RP-VL-R-02 Manuel utilisateur

FlexNetViewer

FlexNetViewer HD

Video Transmitter Over Ethernet

RP-VL-S-02

Video Receiver Over Ethernet

RP-VL-R-02

User’s Guide

CONTEC CO.,LTD.

RP-VL-S-02, RP-VL-R-02 i

Check Your Package

Thank you for purchasing this CONTEC product.

The product package contains the items listed below.

Check the contents of the product package. If you discover any damaged or missing items, contact the

distributor.

Contents

- Unit (One of RP-VL-S-02, RP-VL-R-02) …1 - First step guide …1

- AC adapter …1 - AC cable *1 ...1

- Rubber feet ...4 - DC plug attachment …1

- Cable tie [RP-VL-S-02 only] …1 - M3 screw …1

- Ferrite core [RP-VL-S-02 only]…1 - Warranty Certificate…1

- Serial number label…1

*1 Use the AC cable conformed to your area standards.

CAUTION

The main unit management utility to remotely (via LAN) perform settings for this products (IP

addresses, etc.) can be downloaded (free of charge) from our website. The image transfer utility

software to make your computer a transmitter or receiver is sold separately.

ii RP-VL-S-02, RP-VL-R-02

No part of this document may be copied or reproduced in any form by any means without prior written

consent of CONTEC CO., LTD.

CONTEC CO., LTD. makes no commitment to update or keep current the information contained in this

document. The information in this document is subject to change without notice.

All relevant issues have been considered in the preparation of this document. Should you notice an

omission or any questionable item in this document, please feel free to notify CONTEC CO., LTD.

Regardless of the foregoing statement, CONTEC assumes no responsibility for any errors that may

appear in this document or for results obtained by the user as a result of using this product.

Trademarks

MS, Microsoft and Windows are trademarks of Microsoft Corporation. Other brand and product names

are trademarks of their respective holder.

RP-VL-S-02, RP-VL-R-02 iii

Table of Contents

Check Your Package................................................................................................................................i

Copyright.................................................................................................................................................ii

Trademarks..............................................................................................................................................ii

Table of Contents...................................................................................................................................iii

1BEFORE USING THE PRODUCT 1

About the Product ...................................................................................................................................1

Features.............................................................................................................................................1

Support Software..............................................................................................................................3

Adapter (Option)..............................................................................................................................3

Customer Support....................................................................................................................................4

Web Site ...........................................................................................................................................4

Limited One-Year Warranty...................................................................................................................4

How to Obtain Service............................................................................................................................4

Liability ...................................................................................................................................................4

Safety Precautions...................................................................................................................................5

Safety Information ...........................................................................................................................5

Handling Precautions.......................................................................................................................5

Environment.....................................................................................................................................7

Inspection .........................................................................................................................................7

Storage..............................................................................................................................................7

Disposal............................................................................................................................................7

2SETUP 9

Setting the Hardware...............................................................................................................................9

Parts of this Product and Factory Defaults......................................................................................9

Setting the Group ID......................................................................................................................11

Setting the Maintenance SW .........................................................................................................12

LED ................................................................................................................................................13

Checking the IP Address................................................................................................................14

Settings Using the Software..................................................................................................................14

Setup Method ........................................................................................................................................15

Table Top Installation....................................................................................................................15

Mounting the Product on the Monitor...........................................................................................15

Cable Tie Attachment Method ......................................................................................................15

How to mount the DC plug attachment.........................................................................................16

Startup and Stop ....................................................................................................................................17

Startup procedure...........................................................................................................................17

Stop procedure ...............................................................................................................................18

iv RP-VL-S-02, RP-VL-R-02

3FUNCTION 19

Video Transfer Function .......................................................................................................................19

Example of connection with a PC..................................................................................................19

Example of connection with a camera...........................................................................................20

Remote serial I/O function....................................................................................................................21

Image transfer utility (option)...............................................................................................................22

Controlling display screens in remote locations by Windows PCs..............................................22

Monitoring computer display screens in remote locations ...........................................................22

4ABOUT HARDWARE 23

Hardware specification..........................................................................................................................23

Physical dimensions ..............................................................................................................................26

Interface Connector ...............................................................................................................................28

Image input, Image output: Pin assignment of DVI-D IN, DVI-D OUT.....................................28

Image input: Pin assignment of VIDEO IN...................................................................................29

Remote serial I/O: Pin assignment of SIO.....................................................................................29

LAN: Pin assignment of LAN connector ......................................................................................30

DC Jack: Pin assignment of 5V DC-IN.........................................................................................31

1. Before Using the Product

RP-VL-S-02, RP-VL-R-02 1

1Before Using the Product

This chapter provides information you should know before using the product.

About the Product

The FlexNetViewer HD is a video communications unit allowing long distance transmission via LAN of

high-definition images.

It can act as a digital signage system, remote viewing system or live image transmission system with

high picture quality for a variety of sectors, examples being public facilities, transportation, shopping

malls, mass retailing stores and amusement facilities.

The FlwxNetViewer HD supports DVI signals that are compatible with digital signals with a resolution

up to 1920 x 1080, and it also supports composite signals that are compatible with analog video

equipment, so it can be directly connected to video camera operating.

RP-VL-S-02 is a transmitter that converts input image signals into LAN packet signals and then sends

them.

RP-VL-R-02 is a receiver that converts received LAN packet into image signals and then outputs the

signals.

When you use the transmitter and receiver as a set, you can connect monitors in a 1:1 or 1:N

configuration without depending on the platform such as a PC and OS.

Using the optional image transfer utility allows a variety of connections with the PC acting as a

transmitter or receiver.

In addition, the RP-VL-R-02 can also use the serial I/O (RS-232C) by utilizing the virtual COM driver

produced by CONTEC.

Features

- Monitor screen capability can be extended by LAN.

PCs and monitors with limited cable length can easily be extended through the use of commercially

available LAN cables (category 5 or higher) or hubs between the transmitter and receiver. Image

signals are converted to LAN packets, making possible transmission with minimal loss of picture

quality due to distance.

- Screen display does not depend on the PC or OS.

When you use the transmitter (RP-VL-S-02) and receiver (RP-VL-R-02) as a set, you can display screen

images without depending on your platform such as a PC and OS. You can send the same screen

images to monitors in a 1:1 or 1:N configuration. No complicated utility setup is required.

- Compatibility with high-definition video

High-definition video communication is made possible by the on-board picture compression CPU.

- Simple transmission of live images

The on-board composite input terminal (for the transmitter) allows direct connection to video cameras

and simple real-time transmission of live images.

1. Before Using the Product

2RP-VL-S-02, RP-VL-R-02

- Multi-monitor configuration is possible.

Connecting multiple receivers (RP-VL-R-02) allows you to send the image shown on the transmitter

monitor screen onto multiple monitors simultaneously. This option requires the same number of

receivers (RP-VL-R-02) as the monitors.

- COM port as standard setup

The receiver (RP-VL-R-02) has a COM port as part of its standard setup. By installing the appropriate

driver on the transmitting Windows PC, it can be allocated for use as a COM port on the PC itself,

allowing remote control of serial communications equipment via LAN.

- Image transfer utility and main unit management utility are available.

When the image transfer utility (option) is installed on a PC, it can be used just like a transmitter or

receiver. A PC can be connected as a transmitter to multiple receivers (RP-VL-R-02) or as a receiver

to multiple transmitters (RP-VL-S-02).

Also, when the main unit management utility (*1) is used, various settings can be performed for the

transmitter (RP-VL-S-02) and the receiver (RP-VL-R-02) via Ethernet.

*1 The main management utility can be downloaded from our website (free of charge).

- Fittings for monitor attachment optionally available

Fittings to attach this product to the back of monitors are optionally available. The fittings are

compliant with the VESA standards (75mm x 75mm or 100mm x 100mm).

CAUTION

- Transmitters and receivers may cause an image distortion or fail to transfer images due to the

compatibility with the PC or monitor to be connected. When using this product ensure to utilize

equipment on loan from CONTEC to make an evaluation in the actual user environment.

- A connection beyond the router (Internet connection, for example) is an one-to-one connection.

Please be careful as it requires advanced knowledge on network, such as obtaining a global IP

address.

- Use a cross cable for directly connecting the transmitter and receiver via LAN cable.

1. Before Using the Product

RP-VL-S-02, RP-VL-R-02 3

Support Software

You should use CONTEC support software according to your purpose and development environment.

Main unit management utility FNVHD-UTM

(Downloadable from the CONTEC’s Web site, free of charge)

This utility can be used to set the IP addresses of the transmitter (RP-VL-S-02) and the receiver (RP-VL-R-02), the

availability of the remote serial I/O (SIO) as well as communication specifications.

Refer to the document file of the main management utility in regards to detailed information on compatible operating

systems and so on.

URL: http://www.contec.com

Image transfer utility RP-VL-UTIL-V1 (option)

Once you install this utility on your PC, you can connect the PC directly to either the transmitter (RP-VL-S-02) or the

receiver (RP-VL-R-02) to display screen images.

The utility allows you to display screen images from one PC monitor onto multiple monitors or display screen images

from multiple PC monitors onto one split screen monitor.

The trial version can be downloaded from the CONTEC’s Web site (free of charge). Refer to the document file of

the image transfer utility in regards to detailed information on compatible operating systems and so on.

Adapter (Option)

VESA Bracket for Flex Net Viewer HD (100mm x 100mm) : BRK-VL02-100

VESA Bracket for Flex Net Viewer HD (75mm x 75mm) : BRK-VL02-75

DVI-D Cable(2m) : IPC-DVI/D-020

DVI-D Cable(5m) : IPC-DVI/D-050

* Check the CONTEC’s Web site for more information on these options.

1. Before Using the Product

4RP-VL-S-02, RP-VL-R-02

Customer Support

CONTEC provides the following support services for you to use CONTEC products more efficiently

and comfortably.

Web Site

Japanese http://www.contec.co.jp/

English http://www.contec.com/

Chinese http://www.contec.com.cn/

Latest product information

CONTEC provides up-to-date information on products.

CONTEC also provides product manuals and various technical documents in the PDF.

Free download

You can download updated driver software and differential files as well as sample programs available in

several languages.

For product information

Contact your retailer if you have any technical question about a CONTEC product or need its price,

delivery time, or estimate information.

Limited One-Year Warranty

CONTEC products are warranted by CONTEC CO., LTD. to be free from defects in material and

workmanship for up to One year from the date of purchase by the original purchaser.

Repair will be free of charge only when this device is returned freight prepaid with a copy of the

original invoice and a Return Merchandise Authorization to the distributor or the CONTEC group office,

from which it was purchased.

This warranty is not applicable for scratches or normal wear, but only for the electronic circuitry and

original products. The warranty is not applicable if the device has been tampered with or damaged

through abuse, mistreatment, neglect, or unreasonable use, or if the original invoice is not included, in

which case repairs will be considered beyond the warranty policy.

How to Obtain Service

For replacement or repair, return the device freight prepaid, with a copy of the original invoice. Please

obtain a Return Merchandise Authorization number (RMA) from the CONTEC group office where you

purchased before returning any product.

* No product will be accepted by CONTEC group without the RMA number.

Liability

The obligation of the warrantor is solely to repair or replace the product. In no event will the

warrantor be liable for any incidental or consequential damages due to such defect or consequences that

arise from inexperienced usage, misuse, or malfunction of this device.

1. Before Using the Product

RP-VL-S-02, RP-VL-R-02 5

Safety Precautions

Review the following definitions and precautions to use the product safely.

Safety Information

This document provides safety information using the following symbols to prevent accidents resulting

in injury or death and the destruction of equipment and resources. Review the meanings of these labels

to operate the equipment safely.

DANGER DANGER indicates an imminently hazardous situation which, if not avoided, will

result in death or serious injury.

WARNING WARNING indicates a potentially hazardous situation which, if not avoided, could

result in death or serious injury.

CAUTION CAUTION indicates a potentially hazardous situation which, if not avoided, may

result in minor or moderate injury or in property damage.

Handling Precautions

DANGER

Do not use the product where it is exposed to flammable or corrosive gas. Doing so may result in

an explosion, fire, electric shock, or failure.

CAUTION

- Do not use or store the product in a location exposed to extremely high or low temperature or

susceptible to rapid temperature changes.

Example: - Exposure to direct sunlight

- In the vicinity of a heat source

- Do not use the product in extremely humid or dusty locations. It is extremely dangerous to use the

product with its interior penetrated by water or any other fluid or conductive dust. If the product

must be used in such an environment, install it on a dust-proof control panel, for example.

- Avoid using or storing the device in locations subject to shock or vibration.

- Do not use or store the product in the vicinity of devices that generate strong magnetic force or

electric wave.

- Do not use or store the product in the presence of chemicals.

- Be sure to unplug the power cable from a wall outlet before plugging or unplugging a cable or any

connector.

- Do not modify this product. CONTEC will bear no responsibility for any problems, etc., resulting

from modifying this product.

- In the event of failure or abnormality (foul smells or excessive heat generation), unplug the power

cord immediately and contact your retailer.

- To clean this product, wipe it gently with a soft cloth dampened with either water or mild detergent.

Do not use chemicals or a volatile solvent, such as benzene or thinner, to prevent pealing or

discoloration of the paint.

Ce manuel convient aux modèles suivants

Table des matières

Manuels Émetteur-récepteur populaires d'autres marques

Yaesu

Yaesu FT-7B Manuel utilisateur

Kenwood

Kenwood ProTalk TK-3201 Manuel utilisateur

Texas Instruments

Texas Instruments TLK10232 Manuel utilisateur

Mizuho

Mizuho MX-2 Guide produit

Kenwood

Kenwood TK-3180 Manuel d'utilisation et d'entretien

Blitz

Blitz MJ-398U Manuel utilisateur

Utilicom

Utilicom LongRanger 2050 Manuel utilisateur

Standart

Standart HX290UKA Manuel utilisateur

Altronix

Altronix Pace1PTM Manuel utilisateur

Kirisun

Kirisun PT2208 Manuel utilisateur

ELECRAFT

ELECRAFT KX2 Manuel utilisateur

Zodiac

Zodiac K3 Manuel utilisateur

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Manuel utilisateur

Kenwood

Kenwood TK-2217 Manuel utilisateur

Siemens

Siemens PSO 4000 Manuel utilisateur

Kenwood

Kenwood TS-590SG Manuel utilisateur

Midland

Midland G8E-BT Manuel

ComNav

ComNav Mariner X2 Manuel utilisateur