Contacta STS-K070 Manuel d'utilisation
Installation &
User Guide
June 2020
Speech Transfer System
Dual Speaker Pod System - STS-K070
Speaker and Microphone Pod System - STS-K071
Speaker Pod and Screen Mounted Microphone System - STS-K072
2
Contents
Product Overview
Components
Installation Instructions
AmplierInstallation
Speaker & Microphone Installation
AmplierSetup
Using the System
Troubleshooting
3
3
6
7
8
12
14
16
Contactahasapolicyofcontinuousproductdevelopment,andthereforesmallspecication
changesmaynotbereectedinthismanual.Images,labels,packaging,accessoriesandproduct
coloursaresubjecttochangewithoutnotice.
3
Product Overview
Components
Speech transfer systems provide assistance for clear communication where
normal speech is impaired by use of glass, a security screen or other similar
barriers.
1. Installation and User Manual
2. Amplier
3. IEC Lead
4. Power Supply
There will also be one of the following speaker and microphone systems:
• SpeakerandMicrophonePod(seepage4).
• DualSpeakerPod(seepage4).
• SpeakerPodandScreenMountedMicrophone(seepage5).
Fixing Kit:
• Adhesive Clip x 10
• No.6x1/2”CountersunkScrewsx15
• P-Clips x 6
4
3
2
1
General Components
Speaker & Microphone Components
4
Speaker and Microphone Kits
Speaker and Microphone Pod - STS-K071
(For installation see page 6)
1. Speaker Pod
2. Mouse Microphone
3. StaPod
2
13
Dual Speaker Pod - STS-K070
(For installation see page 6)
1. Speaker Pod x 2
2. Mouse Microphone x 2
2
1
5
Speaker Pod and Screen Mounted Microphone - STS-K072
(For installation see page 6)
1. StaPod
2. Speaker Pod
3. Screen Mounted Microphone with Bent Stem
2
1
3
6
Werecommendthatinstallationiscarriedoutbyaqualiedengineer,
adheringtorelevantstandards.
Checkthecontentsoftheboxtofamiliariseyourselfwiththecomponents.
Thestamicrophoneandampliershouldbeinstalledonthestasideofthe
counter.Thecustomerspeakerandmicrophonekitsshouldbeinstalledon
thecustomersideofthecounter.
Follow all relevant instructions in the following order:
1. AmplierInstallation(seepage7).
2. Microphone&SpeakerKitInstallation(seepage8).
3. AmplierSetup(seepage12).
4. UsingtheSystem(seepage14).
Installation Instructions
A basic toolkit recommended to install the system will include:
• Tape Measure
• Pencil or Marker Pen
• Cable Ties
• Trunking
• Screwdrivers(FlatorBlade2.5mm
and Phillips Head PH2)
• Battery or Mains Drill
• Drillbits: 2mm, 3mm, 5mm and 7mm
• Cable Tacking Gun (10mm)
• WireCutters/Strippers
Recommended Tools
7
1. Placetheamplierunderthestacounter,ensuringthatitwillnot
obstructstawhentheyaresitting.
2. Markthefourxingpointsfortheamplierunderthecounter.
3. Drillandxtheamplierinplaceusingthesuppliedscrews.
4. Installtheamplier’spowersupplyclosetoapowersocketoutletusing
thesuppliedmountingbracketandxingscrews.
Fixing points
Amplifier Installation
Amplifier Connections
After all relevant components have been installed, connect all green plugs to
thesocketsattherearoftheamplierfollowingthelayoutdetailedbelow.
LED connection or alert tone (if required)
CondenceLEDtoconrmthesystemispowered
oranalerttonefortheattentionofsta
Stamicrophoneconnection
Customer microphone connection
CondenceLED(ifrequired)forstatusalerts
and fault detection
Hearing loop aerial
Line in connection for
external audio source
Staspeakerconnection
Customer speaker connection
Power input
connection
Use power supply
through ground
supply only
AmplierInstallation
8
Microphone & Speaker Installation
1. Place a speaker pod on the customer side of the counter top, ensuring it
doesnotcauseanobstruction.
2. Place a mouse microphone on the customer side of the counter top,
ensuring it does not cause an obstruction and is as close to customers
aspossible.Itshouldideallybenomorethan300mmawayfromasta
member.
3. Placeaspeakerpodonthestasideofthecountertop,ensuringitdoes
notcauseanobstruction.
4. Placeamousemicrophoneonthestasideofthecountertop,ensuringit
doesnotcauseanobstructionandisasclosetocustomersaspossible.
5. Speakerpodscanbeeitherfreestandingorxed.Movetostep8ifyou
donotwishtoxthepodstothecounter.
6. Use cable management holes in the counter to run speaker pod and
mousemicrophonecablestotheamplier.Iftherearenotalreadycable
managementholes,drillsuitablelocationsneartherearofboththesta
andcustomersidesofthecounter.
7. Ifxingtheunitstoasurface,removethetopofthepodstogainaccess
tothexingpoints.Markthetwoxingpointsonthebottomofboth
speakerpods.Thenmarktwocableholestobedrilled,oneforboththe
customersideandthestaside.
8. Ensuretherewillbeaccesstoretrievethecablesthendrilltheholes.
9. Fixthepodstotheirrespectivecounters.
10. Feedthewiresthroughthecablemanagementholes.
11. Routeallcablingneatlytotheamplierlocationonthestaside.
Dual Speaker Pod - STS-K070
9
1. Placethestapodonthestasideofthecountertop,ensuringitdoes
notcauseanobstructionandisasclosetostaaspossible.Itshould
ideallybenomorethan300mmawayfromastamember.
2. Place the speaker pod on the customer side of the counter top, ensuring it
doesnotcauseanobstruction.
3. Place the mouse microphone on the customer side of the counter top,
ensuring it does not cause an obstruction and is as close to customers as
possible.
4. Speakerpodsandstapodscanbeeitherfreestandingorxed.Moveto
step8ifyoudonotwishtoxthepodstothecounter.
5. Usecablemanagementholesinthecountertorunthestapod,speaker
pod,andmousemicrophonecablestotheamplier.Iftherearenot
already cable management holes, drill suitable locations near the rear of
boththestaandcustomersidesofthecounter.
6. Ifxingthepodstoasurface,removethetopofthepodstogainaccess
tothexingpoints.Markthetwoxingpointsonboththebottomofthe
speakerpodandstapod.Thenmarktwocableholestobedrilled,one
forboththecustomersideandthestaside.
7. Ensuretherewillbeaccesstoretrievethecablesthendrilltheholes.
8. Fixthepodstotheirrespectivecounters.
9. Feedallwiresthroughthecablemanagementholes.
10. Routeallcablingneatlytotheamplierlocationonthestaside.
Speaker and Microphone Pod - STS-K071
10
1. Positionthescreenmountedmicrophonestem’sonthecustomersideof
thecountertop.
2. Markthe2xingpointsand1cableroutereadyfordrilling(seethe
diagrambelow).
Speaker Pod and Screen Mounted Microphone - STS-K072
3. Drillpilotholesforthexingsandacableholeifneccesary.
4. Feedwiringthroughthecableholebacktotheamplierandxthe
microphoneinplaceusingthesuppliedscrews.
5. Fix the microphone head to the screen using the double-sided pad
supplied.
6. Placethestapodonthestasideofthecountertop,ensuringitdoes
notcauseanobstructionandisasclosetostaaspossible.Itshould
ideallybenomorethan300mmawayfromastamember.
7. Place the speaker pod on the customer side of the counter top, ensuring it
doesnotcauseanobstruction.
8. Speakerpodsandstapodscanbeeitherfreestandingorxed.Moveto
step13ifyoudonotwishtoxthepodstothecounter.
9. Usecablemanagementholesinthecountertorunthestapodand
speakerpodcablestotheamplier.Iftherearenotalreadycable
managementholes,drillsuitablelocationsneartherearofboththesta
andcustomersidesofthecounter.
Autres manuels pour STS-K070
1
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Contacta Système de microphone
Manuels Système de microphone populaires d'autres marques
Sennheiser
Sennheiser Evolution Wireless Digital EW-DX EM 2 Manuel utilisateur
Alpha Technologies
Alpha Technologies RBMS Manuel utilisateur
SWIT Electronics Co.,LTD.
SWIT Electronics Co.,LTD. CW-S150 Manuel utilisateur
Shure
Shure UA844 Manuel utilisateur
Panasonic
Panasonic SHFX70 - DVD HOME THEATER WIRELESS SYSTEM Manuel utilisateur
Pyle
Pyle PDWM5000 Manuel utilisateur