Connex FALCON 2 Manuel utilisateur

INSTRUCTION MANUAL

Please read and retain these instructions for future reference.

CP102

FALCON 2

PC Projector With Wi-Fi Connectivity

• 3500 Lumens

• Up to 1080P

• Wi-Fi Screen Share / Multi-Screen

• USB / HDMI / VGA / AV

• Built-in Speakers

• Universal Compatibility

HIGHLIGHTS

• Projection System : 4.0 inch LCD TFT display

• Projector Resolution : 1280 x 720, support 720P / 1080P

• Brightness : 3500 Lumens

• Image Flip : 360° ip

• Projection : Forward / Back Projection / Drop

• Focusing Method : Manual

• Contrast Ratio : 2,500:1

• Aspect Ratio : 16:9 and 4:3

• Lamps Type : LED 70 W , 30 000 hours life

• Projection Size : 40 - 180 inch

• Keystone : 45 degree physical corrections

• Noise : <45 dB

• Working Voltage : 110 - 240 V / 50 - 60 Hz

• Input Ports : USB X 2 / HDMI / AV / VGA / 3.5 mm

• Machine size : 25 x 17 x 8 cm

PACKAGE CONTENTS

SPECIFICATIONS

• Connex Falcon 2 Projector

• Power Supply

• HDMI Cable

• Remote Control

• User Manual

IDENTIFYING PARTS

THE FRONT COVER MUST SLIDE OPEN TO TURN ON / OFF THE PROJECTOR

OPERATING INSTRUCTIONS

GETTING STARTED

Connect the Power Cord to the Power Input slot located on the back of the

Projector, and then plug the other end of the cord into a plug outlet. The LED

Indicator will light up red when power is connected to projector.

SWITCHING ON / OFF

To switch on the Falcon 2 Projector, press the power button on the Remote or slide

open the front cover on the projector. The Projector will play a boot sequence on

its screen. To switch off the Falcon 2, press the power button on the remote or

slide close the front cover on the projector.

STANDALONE STREAMING

The Projector can be used as a standalone device to share content from a variety

of devices with a wired connection or from a USB ash drive.

KEYSTONE CORRECTION / LENS FOCUS

Use the Keystone Correction Turn Dial to adjust the angle of the Projector. Use the

Lens Focus Turn Dial to adjust image focus to make picture clear.

MULTIMEDIA CONNECTION

To connect to the USB drive select the source “Multimedia” or press the USB

Button on the remote. Then navigate to the le type that you want (movie, photo,

music or text) using the directional keys. Select the le you would like

to view by pressing the Play / Pause button or the OK button on the remote

or the OK button on the projector.

AV VIDEO CONNECTION

Connect the 3-in-1 Cable (included) to the Video Input on the back of the

projector. Navigate to the AV Media Source and press either the OK Button on the

Remote Control or the OK Button on the Projector.

HDMI CONNECTION

Connect an HDMI cable to the HDMI Input on the back of the projector. Navigate

to the HDMI media source and press either the OK Button on the Remote Control

or the OK Button on the Projector.

Note: The projector is now in standby mode.

VGA CONNECTION

Connect a VGA cable to the VGA Input on the back of the Projector. Navigate to

the VGA media source and press either the OK Button on the Remote Control or

the OK Button on the Projector.

AUDIO CONNECTION

Connect a 3.5 mm jack cable to the 3.5 Output on the back of the projector.

WIRELESS PROJECTION: iOS DEVICES

Select the Wireless projection option via the source button on the projector’s

control panel. Press the ”OK” key on the remote control and then switch the

system to iOS.

Open the iOS device, go to ”WIFI” from settings to search for the name of the

projector to be connected, then open the mirror function of the iOS device. Select

the projector name and input the password to connect successfully.

WIRELESS PROJECTION: ANDROID DEVICES

Select the Wireless projection option via the source button on the projector’s

control panel or remote control. Press the ”OK” key on the remote control and then

switch the system to Android.

NOTE! Support iOS6 or above.

Open your Android device, go to ”Device connectivity” from settings and select

”Wireless projection” and search for projector name ”Connex Falcon 2”. Select the

projector name to connect.

WIRED PROJECTION: iOS DEVICES

Select the Wireless projection option via the source button on the projector’s

control panel or remote control. Press the ”Ok” key on the remote control and then

switch system to iOS.

NOTE: Support Android 5.0 or above.

Connect to the USB interface through the Apple data cable. For the rst time (after

connecting to the projector, it will connect automatically), a dialog box will pop up

to ask ”Trust the device?”, Click ”Trust” and wait for 3 - 5 seconds, the content of the

iPhone or iPad will be projected to the projector screen.

WIRED PROJECTION: ANDROID DEVICES

Select the Wireless projection option via the source button on the projector’s

control panel or remote control. Press the ”Ok” key on the remote control and then

switch system to Android.

NOTE: Some iOS devices will pop up the ”This accessory may not be

supported” window, please feel free to use it because this the normal

notication. Please wait patiently while the wired connection program

updates if the mobile phone system version is outdated.

Connect a data cable to the USB2 interface. Open the ”USB tethering” in the

mobile phone’s ”Settings” interface. Wait for 3-5 seconds to connect successfully.

NOTE: The USB debugging mode must be turned on when using this function.

Please wait patiently for the wired connection program to update.

Supports Android 5.0 or above.

• Never use your projector near water or in areas where it can come into contact

with water. Never handle the projector if it was dropped in water or any other

liquid. If the product comes into contact with water while switched off, but still

plugged in it is a safety hazard.

• Always make sure your hands are dry before touching the plug or power

connections.

• Do not operate the product with a damaged cord or plug, or after it

malfunctions, has been dropped, or damaged in any manner.

• The Falcon 2 is intended for personal use only. Commercial use invalidates the

warranty and the supplier cannot be held responsible for injury or damage

caused when using the device for any other purpose than that which it was

intended for.

• This projector is not intended for use by children, or persons with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction concerning use of the

device by a person responsible for their safety. Extreme caution must

be exercised.

• Children should be supervised to ensure that they do not play with the Projector.

Packaging must never be left within reach of children, as it is potentially

dangerous.

• Do not cover the vents of the projector as this may lead to excessive heating of

the Falcon 2 components.

• Always leave a minimum distance of 10 cm around the unit to ensure sufcient

ventilation.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Connex Projecteur

Connex

Connex FALCON CP100 Manuel utilisateur

Connex

Connex LUMEN CP104 Manuel utilisateur

Connex

Connex E-LUMINATE CP101 Manuel utilisateur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur