Connects2 Vision CAM-16 Manuel utilisateur

www.c2vision-eu.com

Image Sensor 1099 HD CCD

TV Lines: 560

Resolution: 976 x 496

Minimum Illumination: 0.1 Lux

TV System: NTSC

Waterproof Rating: IP68

Horizontal Angle: 170 Degrees

Vertical Angle: 120 Degrees

Parking Lines: Yes (Removable)

Image Adjustment: Yes (Mirror/Normal)

Enhanced Performance In Low Light: Yes

Video Output: 1.0V p-p 75ohm

Operating Voltage: 12V DC (Negative Ground)

Current Consumption: 120mA @ 13.8V

Operating Temperature: -20 Degrees C to +70 Degrees C

User Manual

Prior to Installation

Read the manual prior to installation. Technical knowledge is necessary for installation.

Please ensure you use the correct tools to avoid damage to the vehicle or product.

Connects2 can not be held responsible for the installation of this product.

Technical Support

Connects2 want to provide a fast and suitable resolution should you encounter any

technical issues. With this in mind, when contacting Connects2, try to provide as

much Information as possible. This will speed up the process and help us to help you.

Please use our dedicated online technical support centre: support.connects2.com

Universal Camera

Surface Mounted in Smooth Squared Housing

PRODUCT FEATURES:

DISCLAIMER:

CAM-16

2

Connects2Vision

www.c2vision-eu.com

CONTENTS

• Camera with mounting points and 1m cable to mini Male 6 pin connector

• 1m camera connection cable with mini Female 6 pin connector and RCA

Female connector

• 6m Male to Male RCA extension cable

• Instructions

INSTALLATION

1. Connect the Black wire to a suitable ground and the Red wire to a switched

+12V supply.

2. If the camera is to be used in the rear of the vehicle, the Red wire should

be connected to the reversing light circuit or an interface which provides a

reverse signal.

3. Select a suitable location for the camera and ensure that the area is free

from all cables, fuel & oil. Whenever possible, avoid locations that are subject

to road dirt & water spray.

4. Using the camera mounting points, mount the camera in the required

position on the vehicle.

5. Using the supplied video cable, connect the camera to the display screen

and ensure that the image is displayed correctly.

6. To swap the image from mirror to normal view, cut the small White looped

wire which is located on the camera connection cable.

7. To remove the parking line feature, cut the small Blue looped wire which is

located on the camera connection cable.

Subscribe to our YouTube Channel for installation

guides and tips... www.youtube.com/connects2

Table des matières

Autres manuels Connects2 Caméra embarquée

Connects2

Connects2 CAM-MB9 Manuel utilisateur

Connects2

Connects2 CAM-FD14 Manuel utilisateur

Connects2

Connects2 CAM-JG1-AD Manuel utilisateur

Connects2

Connects2 Vision CAM-34 Manuel utilisateur

Connects2

Connects2 Vision CAM-37 Manuel utilisateur

Connects2

Connects2 Vision CAM-FD25 Manuel utilisateur

Connects2

Connects2 CAM-SK3 Manuel utilisateur

Connects2

Connects2 CAM-FT5 Manuel utilisateur

Connects2

Connects2 CAM-AU5 Manuel utilisateur

Connects2

Connects2 CAM-VW9.2 Manuel utilisateur

Connects2

Connects2 CAM-PO1-AD Manuel utilisateur

Connects2

Connects2 Connects2Vision CAM-LR2-AD Manuel utilisateur

Connects2

Connects2 CAM-CT1 Manuel utilisateur

Connects2

Connects2 CAM-PE2 Manuel utilisateur

Connects2

Connects2 CAM-30 Manuel utilisateur

Connects2

Connects2 CAM-KIT8 Manuel utilisateur

Connects2

Connects2 CAM-VW1-AD Manuel utilisateur

Connects2

Connects2 CAM-FT3 Manuel utilisateur

Connects2

Connects2 Vision CAM-FD13 Manuel utilisateur

Connects2

Connects2 CAM-AU6 Manuel utilisateur

Connects2

Connects2 CAM-ST1 Manuel utilisateur

Connects2

Connects2 CAM-SK2-AD Manuel utilisateur

Connects2

Connects2 CAM-1 Manuel utilisateur

Connects2

Connects2 Vision AM-44 Manuel utilisateur

Manuels Caméra embarquée populaires d'autres marques

Cansonic

Cansonic UltraDuo Z2 Manuel utilisateur

Gazer

Gazer F720 Manuel utilisateur

HP

HP f500g Manuel utilisateur

Xblitz

Xblitz TANGO 4K Manuel utilisateur

Rexing

Rexing M1 Manuel utilisateur

Maka Technologies

Maka Technologies Marbella MXPro Manuel utilisateur

NESA

NESA NRC-80DLM Instructions d'installation et d'utilisation

Kaiser Baas

Kaiser Baas R20 Manuel utilisateur

Boyo

Boyo VTM43TC Manuel utilisateur

Minolta

Minolta MNCD37 Manuel utilisateur

Thinkware

Thinkware FA10 Manuel utilisateur

Momento

Momento MD-5200 Manuel utilisateur

BlackVue

BlackVue DR590X-1CH Manuel utilisateur

HP

HP F300 Manuel utilisateur

CammSys

CammSys BlackSys BH-300 Manuel utilisateur

Snooper

Snooper DVR-2HD Manuel utilisateur

Lukas

Lukas Q900 Manuel utilisateur

RVS

RVS 450C Manuel utilisateur