Compaq ProLiant 8500 Manuel d'installation et d'exploitation

Compaq Confidential – Need to Know Required

Writer: Ruben Garcia Project: Compaq ProLiant 8500 Server I/O Module Upgrade Guide Comments:

Part Number: 216597-001 File Name: 216597-001 Ajax PCI-X Upgrade Guide-prod.doc Last Saved On: 1/11/01 10:28 AM

ProLiant 8500 Server

I/O Module Upgrade Guide

First Edition (January 2001)

Part Number 216597-001

Compaq Computer Corporation

Compaq Confidential – Need to Know Required

Writer: Ruben Garcia Project: Compaq ProLiant 8500 Server I/O Module Upgrade Guide Comments:

Part Number: 216597-001 File Name: 216597-001 Ajax PCI-X Upgrade Guide-prod.doc Last Saved On: 1/11/01 10:28 AM

Notice

Compaq, the Compaq logo, Compaq Insight Manager, ProLiant, and SmartStart Registered in U.S.

Patent and Trademark Office.

Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation in the

United States and other countries.

Intel, Pentium, and Xeon are trademarks of Intel Corporation in the United States and other countries.

All other product names mentioned herein may be trademarks of their respective companies.

Compaq shall not be liable for technical or editorial errors or omissions contained herein. The

information in this document is provided “as is” without warranty of any kind and is subject to change

without notice. The warranties for Compaq products are set forth in the express limited warranty

statements accompanying such products. Nothing herein should be construed as constituting an

additional warranty.

Compaq ProLiant 8500 Server I/O Module Upgrade Guide

First Edition (January 2001)

Part Number 216597-001

Compaq Confidential – Need to Know Required

Writer: Ruben Garcia Project: Compaq ProLiant 8500 Server I/O Module Upgrade Guide Comments:

Part Number: 216597-001 File Name: 216597-001 Ajax PCI-X Upgrade Guide-prod.doc Last Saved On: 1/11/01 10:28 AM

Contents

Compaq ProLiant 8500 Server I/O Module Upgrade Guide

Introduction .................................................................................................................1

Kit Contents..........................................................................................................2

Tools Required .....................................................................................................2

Upgrade Precautions....................................................................................................3

Preparing the Server for the Upgrade ..........................................................................4

Configuring the Server .........................................................................................4

Installing the ProLiant 8500 I/O Module Upgrade Kit Support

Software CD .........................................................................................................5

Updating the System Partition with Compaq Server Diagnostics ........................6

Updating the System Dispatcher Utility and Migrating the System .....................7

Removing the Cable Management Arm ...............................................................8

Removing the I/O Module....................................................................................9

Transferring I/O Expansion Boards Between I/O Modules.......................................11

Removing PCI Expansion Boards from Slots 1 Through 9................................11

Removing PCI Expansion Boards from Slots 10 and 11....................................12

I/O Board Slot Descriptions................................................................................13

I/O Expansion Board Descriptions .....................................................................14

Supported I/O Expansion Boards .......................................................................15

Installing the I/O Expansion Boards in the New I/O Module.............................17

Installing the Remote Insight Lights-Out Edition Board....................................20

Completing the Upgrade............................................................................................23

Installing the New Labels ...................................................................................23

Connecting the Cable Management Arm and Cables .........................................24

Transferring the Serial Number to the New I/O Module....................................25

Confirming the Serial Number and Service Number Display ............................25

iv Compaq ProLiant 8500 Server I/O Module Upgrade Guide

Compaq Confidential –Need to Know Required

Writer: Ruben Garcia Project: Compaq ProLiant 8500 Server I/O Module Upgrade Guide Comments:

Part Number: 216597-001 File Name: 216597-001 Ajax PCI-X Upgrade Guide-prod.doc Last Saved On: 1/11/01 10:28 AM

Compaq ProLiant 8500 Server I/O Module Upgrade Guide

continued

Removing the Virtual Power Button Cable................................................................26

Removing Cable Segment A...............................................................................26

Removing Cable Segment B...............................................................................30

Removing Cable Segment C...............................................................................33

Compaq Confidential –Need to Know Required

Writer: Ruben Garcia Project: Compaq ProLiant 8500 Server I/O Module Upgrade Guide Comments:

Part Number: 216597-001 File Name: 216597-001 Ajax PCI-X Upgrade Guide-prod.doc Last Saved On: 1/11/01 10:28 AM

Compaq ProLiant 8500 Server I/O Module

Upgrade Guide

Introduction

Use this option kit and the instructions provided in this guide to add PCI-X

technology and the ROM-Based Setup Utility (RBSU) to

Compaq ProLiant™ 8500 servers.

After the upgrade, the server will become a ProLiant DL760. A new service

number will be assigned to the server to identify the new components. This

service number is used to identify the type of system you have and will assure

that proper help and diagnosis is given by the Call Center or Service

Technician. You will maintain the current system serial number, and when you

call for service, you should provide both numbers: the original system serial

number, and the upgrade service number.

IMPORTANT: After the upgrade, the server will only support Microsoft Windows NT

Server 4.0 and Windows 2000. Also, the server will only support three 5V I/O expansion

boards and eight 3.3V I/O expansion boards. For detailed PCI/PCI-X expansion slot

information, refer to the “Supported I/O Expansion Boards” section of this document.

2Compaq ProLiant 8500 Server I/O Module Upgrade Guide

Compaq Confidential –Need to Know Required

Writer: Ruben Garcia Project: Compaq ProLiant 8500 Server I/O Module Upgrade Guide Comments:

Part Number: 216597-001 File Name: 216597-001 Ajax PCI-X Upgrade Guide-prod.doc Last Saved On: 1/11/01 10:28 AM

Kit Contents

■I/O drawer with the cable for the Remote Insight Lights-Out Edition

board installed

■SmartStart™ and Support Software CD 4.90B

■ProLiant 8500 I/O Module Upgrade Kit Support Software CD

■ProLiant 8500 I/O Module Upgrade Kit Migration diskette

■Compaq Server Diagnostics diskette

■ROM-Based Setup Utility User Guide

■Compaq ProLiant 8500 Server I/O Module Upgrade Kit Quick

Installation poster

■2 PCI/PCI-X access panel hood labels

■1 ProLiant DL760 label

■2 service number labels

Tools Required

■T-15 screwdriver

■Flathead screwdriver

Compaq ProLiant 8500 Server I/O Module Upgrade Guide 3

Compaq Confidential –Need to Know Required

Writer: Ruben Garcia Project: Compaq ProLiant 8500 Server I/O Module Upgrade Guide Comments:

Part Number: 216597-001 File Name: 216597-001 Ajax PCI-X Upgrade Guide-prod.doc Last Saved On: 1/11/01 10:28 AM

Upgrade Precautions

WARNING: There is a risk of personal injury from hazardous energy levels. The

installation of options and routine maintenance and servicing of this product

shall be performed by individuals who are knowledgeable about the procedures,

precautions, and hazards associated with equipment containing hazardous

energy circuits.

WARNING: To reduce the risk of personal injury or damage to the equipment,

refer to the documentation supplied with the system, and observe the

appropriate safety precautions and option installation instructions.

WARNING: To reduce the risk of personal injury from hot surfaces, allow the

internal system components to cool before touching them.

WARNING: To reduce the risk of electric shock or damage to the equipment:

■Do not disable the power cord grounding plug. The grounding plug is an

important safety feature.

■Plug the power cord into a grounded electrical outlet that is easily

accessible at all times.

■Disconnect power from the system by unplugging the power cord from

either the electrical outlet or the system.

CAUTION: To prevent damage to your system, you must become static-free by

touching a screw or unpainted surface on the system’s housing before

beginning these procedures. In addition, avoid touching any exposed metal on

the option board and chip or on the system’s circuit boards.

4Compaq ProLiant 8500 Server I/O Module Upgrade Guide

Compaq Confidential –Need to Know Required

Writer: Ruben Garcia Project: Compaq ProLiant 8500 Server I/O Module Upgrade Guide Comments:

Part Number: 216597-001 File Name: 216597-001 Ajax PCI-X Upgrade Guide-prod.doc Last Saved On: 1/11/01 10:28 AM

Preparing the Server for the

Upgrade

IMPORTANT: The ProLiant 8500 I/O Module upgrade process may destroy data on your

server. To ensure that you do not lose data, Compaq recommends that you back up your

server.

IMPORTANT: The upgraded server will only support the Microsoft Windows NT

Server 4.0 and Windows 2000 operating systems.

1. Back up your data. If you have a new ProLiant 8500 system with no

operating system installed, go to the “Configuring the Server”section of

this guide.

2. If your server is installed with Microsoft Windows NT Server 4.0 or

Windows 2000, go to the “Installing the ProLiant 8500 I/O Module

Upgrade Kit Support Software CD”section of this guide.

3. If your current server is running an operating system other than

Microsoft Windows NT Server 4.0 or Windows 2000, run the Erase

Utility from the SmartStart and Support Software CD 4.90B and

continue with the “Configuring the Server”section of this guide.

Configuring the Server

SmartStart is the intelligent way to configure the server and to load the system

software, thereby achieving a well-integrated server that ensures maximum

dependability and supportability.

To install the SmartStart and Support Software CD 4.90B:

1. Insert the SmartStart and Support Software CD 4.90B.

2. Reboot your server from the SmartStart and Support Software CD

4.90B.

3. Follow the screen prompts.

NOTE: During this process you will be prompted to load the operating system.

4. Install Compaq Insight Manager™when prompted by SmartStart.

When the CD-ROM busy LED indicator is illuminated, the SmartStart

installation sequence begins.

Compaq ProLiant 8500 Server I/O Module Upgrade Guide 5

Compaq Confidential –Need to Know Required

Writer: Ruben Garcia Project: Compaq ProLiant 8500 Server I/O Module Upgrade Guide Comments:

Part Number: 216597-001 File Name: 216597-001 Ajax PCI-X Upgrade Guide-prod.doc Last Saved On: 1/11/01 10:28 AM

The first time the server is configured, the SmartStart program automatically

creates a system partition and installs the Compaq System Configuration

Utility and other Compaq utilities in that partition.

Refer to the Server Setup and Management pack for instructions on using

SmartStart.

Installing the ProLiant 8500 I/O Module

Upgrade Kit Support Software CD

The ProLiant 8500 I/O Module Upgrade Kit Support Software CD contains

the Compaq Support Paqs for Microsoft Windows NT Server 4.0 and

Microsoft Windows 2000. The CD also contains the Compaq System Erase

utilities. To begin the update:

1. Load the CD into the CD-ROM drive.

2. If Autorun is active, the Compaq Remote Deployment Utility screen is

opened. If Autorun is not enabled, run SETUP.EXE from the \NTCSP

folder.

3. Enter the Target Computer and then click on the Open Support Paq

button.

4. The Select a Support Paq to Open window displays with two files. If

you are running Windows 2000, highlight the BP000031 file. If you are

running Windows NT Server 4.0, highlight the BP000029 file.

5. Click the Open button.

The Compaq Remote Deployment Utility screen will display again with

all the components on the CD. By default, all components will be

flagged to be updated.

6. Click the Install button at the top of the screen to begin the installation

process.

After all components have been installed, a listing of the installed

components will display.

7. Continue with the “Updating the System Partition with Compaq Server

Diagnostics”section of this guide.

6Compaq ProLiant 8500 Server I/O Module Upgrade Guide

Compaq Confidential –Need to Know Required

Writer: Ruben Garcia Project: Compaq ProLiant 8500 Server I/O Module Upgrade Guide Comments:

Part Number: 216597-001 File Name: 216597-001 Ajax PCI-X Upgrade Guide-prod.doc Last Saved On: 1/11/01 10:28 AM

Updating the System Partition with Compaq

Server Diagnostics

Compaq Server Diagnostics will be updated on the system partition. This step

is necessary, or Compaq Server Diagnostics would have to be run from the

diskette each time. To install Compaq Server Diagnostics onto the system

partition, perform the following steps:

1. Reboot the server.

2. At the end of the Power On Self-Test (POST), press F10 to access the

Compaq System Configuration screen.

3. Press Enter at the Compaq logo screen to access the Main Menu.

4. Insert the Compaq Server Diagnostics diskette into your diskette drive.

5. At the Main Menu, select the System Configuration option.

6. Select System Partition at the System Configuration screen.

7. Select Upgrade System Partition at the System Partition screen.

8. Select Compaq Diagnostics from the Upgrade Utility Selection Panel by

pressing the Spacebar to place an Xnext to it.

9. Press Enter to complete the update.

10. Exit all the way back to the Main Menu screen by pressing ESC from

each of the opened menus.

11. Remove the Compaq Server Diagnostics diskette from the server.

12. Insert the ProLiant 8500 I/O Module Upgrade Kit Migration diskette.

13. Continue with the “Updating the System Dispatcher Utility and

Migrating the System”section of this guide.

Autres manuels pour ProLiant 8500

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Compaq Serveur

Compaq

Compaq ProSignia 500 Mode d’emploi

Compaq

Compaq ProLiant DL380 G2 Guide de référence rapide

Compaq

Compaq ProLiant DL380 Generation 2 Manuel

Compaq

Compaq DS10L - AlphaServer - 256 MB RAM Manuel utilisateur

Compaq

Compaq 1850R - ProLiant - 128 MB RAM Manuel utilisateur

Compaq

Compaq ML530 - ProLiant - 128 MB RAM Manuel utilisateur

Compaq

Compaq DL360 - ProLiant - Photon Guide de référence rapide

Compaq

Compaq AlphaServer DS10 Fiche d'information produit

Compaq

Compaq 307560-001 - ProLiant - 2500R Manuel utilisateur

Compaq

Compaq DS20E - AlphaStation - 1 GB RAM Guide de démarrage rapide

Compaq

Compaq AlphaServer GS60 Manuel utilisateur

Compaq

Compaq 231027-002 - ProLiant - DL320R01 Guide de référence rapide

Compaq

Compaq ProLiant 400 Guide de démarrage rapide

Compaq

Compaq ProLiant 5500 Instructions d'utilisation et de sécurité

Compaq

Compaq TruCluster Server AA-RHGWB-TE Manuel utilisateur

Compaq

Compaq 222863-001 - TaskSmart W2200 Model 10 Manuel

Compaq

Compaq BL10e - HP ProLiant - 512 MB RAM Manuel de référence

Compaq

Compaq 108164-003 - ProLiant - 800 Guide de référence rapide

Compaq

Compaq 234664-002 - ProLiant - ML330T02 Manuel

Compaq

Compaq 108164-003 - ProLiant - 800 Guide de référence rapide

Compaq

Compaq BL10e - HP ProLiant - 512 MB RAM Manuel utilisateur

Compaq

Compaq 222863-001 - TaskSmart W2200 Model 10 Manuel utilisateur

Compaq

Compaq ML350 - ProLiant - G2 Manuel

Compaq

Compaq DH-64BAA-AA - AlphaServer - ES40 Manuel utilisateur

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur

Planet

Planet NAS-7410 Manuel utilisateur