Compaq Cabinet H9A11 Manuel utilisateur
H9A11Cabinet
Installation/Owner'sGuide
Part Number: EK-H9A11-IN. B01
June 1999
Compaq Computer Corporation
Houston, Texas
June 1999
COMPAQ COMPUTER CORPORATION SHALL NOT BE LIABLE FOR TECHNICAL OR EDITORIAL
ERRORS OR OMISSIONS CONTAINED HEREIN, NOR FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE FURNISHING, PERFORMANCE, OR USE OF THIS MATERIAL. THIS
INFORMATION IS PROVIDED “AS IS” AND COMPAQ COMPUTER CORPORATION DISCLAIMS ANY
WARRANTIES, EXPRESS, IMPLIED OR STATUTORY AND EXPRESSLY DISCLAIMS THE IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, GOOD TITLE AND
AGAINST INFRINGEMENT.
This publication contains information protected by copyright. No part of this publication may be photocopied or
reproduced in any form without prior written consent from Compaq Computer Corporation.
1999 Compaq Computer Corporation.
All rights reserved.
The software described in this guide is furnished under a license agreement or nondisclosure agreement. The
software may be used or copied only in accordance with the terms of the agreement.
Compaq and the Compaq logo are registered in United States Patent and Trademark Office.
Other product names mentioned herein may be trademarks and/or registered trademarks of their respective
companies.
iii
Table of Contents
Preface
Overview....................................................................................................................................v
Intended Audience ......................................................................................................................v
How to Use This Guide...............................................................................................................v
Organization..............................................................................................................................vi
Conventions...............................................................................................................................vi
Safety Symbol............................................................................................................................vi
Reader's Comments...................................................................................................................vii
1 Introduction
1.1 Description........................................................................................................................1–1
1.2 Specifications....................................................................................................................1–3
2 Installation
2.1 Introduction.......................................................................................................................2–1
2.2 Tools Required..................................................................................................................2–1
2.3 Site Planning.....................................................................................................................2–1
2.4 Unpacking.........................................................................................................................2–3
2.5 Installation Procedures.......................................................................................................2–9
2.5.1 Removing and Replacing the Rear Lift-Off Door....................................................2–10
2.5.2 Removing and Replacing the Front Filler Panels..................................................... 2–12
2.5.3 Pulling Out and Adjusting the Stabilizer Bar .......................................................... 2–14
2.5.4 Removing and Replacing the Power Distribution Unit............................................ 2–16
A Field Replaceable Units (FRUs)
iv
Figures
Figure 1-1 H9A11 Cabinet...................................................................................................... 1–2
Figure 2-1 Unpacking the Cabinet........................................................................................... 2–4
Figure 2-2 Installing the Ramps............................................................................................... 2–6
Figure 2-3 Deskidding the Cabinet .......................................................................................... 2–8
Figure 2-4 Removing and Replacing the Rear Lift-Off Door.................................................. 2–11
Figure 2-5 Removing and Replacing the Front Filler Panels................................................... 2–13
Figure 2-6 Pulling Out and Adjusting the Stabilizer Bar......................................................... 2–15
Figure 2-7 Removing and Replacing the Power Distribution Unit .......................................... 2–17
Tables
Table A-1 Field Replaceable Units (FRUs)..............................................................................A–1
v
Preface
Overview
This guide provides the information necessary to install the H9A11 Cabinet. This guide does
not provide information concerning systems that can be installed in the cabinet. For
information concerning systems installed in the cabinet, refer to the respective
documentation shipped with the system.
Intended Audience
The instructions in this guide are for Compaq Customer Service representatives and
customer maintenance personnel who are familiar with computer hardware and operating
systems. Personnel should be experienced and trained in installing computer and related
equipment.
How to Use This Guide
Read all of this guide before installing the H9A11 Cabinet. As mentioned earlier, for
information concerning systems installed in the cabinet, refer to the respective
documentation shipped with the system.
Before installation, review the warranty. The terms of the warranty agreement with Compaq
may require that a qualified Compaq Customer Service representative install the system.
Contact your local Compaq representative if you have any questions.
vi
Organization
This guide is organized as follows:
Chapter 1, Introduction -- Provides an overview of the H9A11 Cabinet features and
specifications.
Chapter 2, Installation -- Provides site preparation, unpacking, and installation
information.
Appendix A, Field Replaceable Units (FRUs) -- Provides a list of the field replaceable
units (FRUs) for the H9A11 Cabinet.
Conventions
The following conventions are used in this guide:
Convention Meaning
Note A note calls the reader's attention to important information.
Caution Cautions provide information to prevent damage to equipment or
software. Read these carefully.
WARNING A warning contains information essential to the safety of personnel.
Safety Symbol
The following symbol appears on the power distribution unit. Please review its definition
below:
This Dangerous Voltage warning symbol indicates a risk of electric
shock and indicates hazards from dangerous voltage.
vii
Reader's Comments
Compaq welcomes your comments on this or any other manual. You can send your
comments to Compaq in the following ways:
•Internet electronic mail: reader-comments@digital.com
•Mail:
Compaq Computer Corporation
Information Design
PKO3-2/21J
129 Parker Street
Maynard, MA 01754-2199
For additional information, call 1-800-344-4825.
This is some white text.
H9A11 Cabinet Installation/Owner’s Guide 1–1
1
Introduction
1.1 Description
The H9A11 Cabinet (Figure 1-1) is a low-cost, computer-equipment enclosure system that
meets the Electronic Industries Association (EIA) standard 310C and the International
Electrotechnical Commission (IEC) 297 standards and can accommodate fixed or slide-
mounted chassis that fit into a standard 48.26-cm (19-in.) rack.
The cabinet has the following factory installed features:
•Equipment mounting rails with the EIA universal rail-hole pattern
•Front trim kit that provides a finished look to the front opening of the cabinet
•Vented rear lift-off door
•Nonvented top cover
•Four nonlocking casters that facilitate the placement of the cabinet. The front two
casters swivel. The rear two casters are fixed.
•Adjustable leveling feet that are used to stabilize and secure the cabinet at the
installation site.
•Stabilizer bar that is used to provide cabinet stability when installing or sliding
equipment out of the cabinet.
•A single-phase H7600-AA (120 Vac), H7600-AB (240 Vac), or H7600-DB (240 Vac)
power distribution units (PDU) --- Each H7600-AA/AB power distribution unit
provides ten (10) ac power outlets and each H7600-DB power distribution unit provides
twelve (12) ac power outlets.
Introduction
1–2 H9A11 Cabinet Installation/Owner’s Guide
Figure 1-1 H9A11 Cabinet
J1
Not for
external
loads
scale=.12
LJ-04803
scale=.9
Table des matières
Autres manuels Compaq Enceinte
Compaq
Compaq StorageWorks Manuel utilisateur
Compaq
Compaq 4200 Family Manuel utilisateur
Compaq
Compaq StorageWorks 2100 Manuel utilisateur
Compaq
Compaq StorageWorks 4100 - RAID Array Manuel utilisateur
Compaq
Compaq 4200 Family Manuel utilisateur
Compaq
Compaq StorageWorks DS-BA370 Series Manuel utilisateur
Compaq
Compaq StorageWorks 9000 42U Manuel utilisateur
Compaq
Compaq 3U RM Storage Enclosure Manuel utilisateur
Compaq
Compaq 4354R - StorageWorks Enclosure Storage Instructions d'installation et d'utilisation
