Command access PD15REXKIT-ED Manuel utilisateur
PD15REXKIT-ED
Doc # 20339_A
1
INSTALLATION INSTRUCTIONS
A.
Visit our website for more details
www.CommandAccess.com
U.S. Customer Support
1-888-622-2377
Canada Customer Support
1-855-823-3002
Ki t in c l u d e s
A. REX switch
B. 4 - Phillips screws
C. 2- Scky pad w/ zip e
D. REX scker
to o l s Re q u i R e d
• Phillips screw driver
The PD15REXKIT-ED is a eld installable request to exit switch for AHT 8000/9000, PD15/16,
Jackson 1285/1295, & Kawneer 1686 series exit devices.
B. D.
C.
• Rang:
• Conguraon:
.5A @24 VAC
Green - Common (C)
Blue - Normally Open (NO)
Gray - Normally Closed (NC)
specifications
Mechanical
AHT/Jack/Kaw Solenoid
CAT Modified
PD15REXKIT-ED
AHT/Jackson Motor
Solenoid
Motor
CAT Modified
unmodified
Easy Order#
79148
PD15 Rex MatRix
Mechanical = PD15/16, AHT 8000/9000, Kawneer 1686, Jackson 1285/1295
2
• Remove rear mounting bracket and
slide REX bracket into existing groove in
housing towards push pad.
• Depress pushpad and slide until REX
triggers on the pushpad, secure REX bracket
by tightening all (4) screws.
• Test placement by depressing pushpad
to make sure switch activates.
1 2
3 4
• Add sticky pad and zip tie to secure
REX wires and add wire configuration sticker.
Table des matières
