Comelit IPSWP050A Manuel utilisateur

NETWORK SWITCH,

5 GIGABIT PORTS (4 POE)

ART. IPSWP050A

Please read this manual thoroughly before use and keep it for future reference

PoE Ethernet Switch

Directory

1 Product Introduction ..................................................................................2

1.1 Product Overview...................................................................................................2

1.2 Front and rear panel description............................................................................2

1.3 LED Indicator description.......................................................................................3

1.4 Switch Features and Specifications .......................................................................4

2 Hardware installation..................................................................................6

2.1 Power cord .............................................................................................................6

2.2 Connect Computer (NIC) to the switch ..................................................................6

2.3 Switch Cascade Connection..................................................................................7

2.4 Switch connection to the PD..................................................................................7

2.5 RJ-45 Pin specification...........................................................................................7

2.6 Notes ......................................................................................................................8

PoE Ethernet Switch

1 Product Introduction

1.1 Product Overview

Thank you for choosing our company's switch, this product is a 5-port

10/100/1000M Unmanaged PoE Ethernet switch.

The product is desktop design, all-metal chassis and elegant appearance. This

product is easy to install, can rack, plug and play, no management; Dynamic

LED indicator to monitor switch status and troubleshooting work. Supporting 5

10/100/1000Mbps auto-negotiation ports, use store and forward technology,

combined with dynamic memory assignment, to ensure it can be distributed to

each port. Flow control ensures to prevent data packet from losing while

sending and receiving. Compatible with 10Base-T, 100Base-TX and 1GBase

three network environment.

LED panel light displays power and network state dynamically. 1-4 ports have

PoE function, the power is up to 26 watts each port, compliant with

IEEE802.3af, IEEE802.3at standards. PoE total power reaches 75W for all

ports. It can connect IP phone, IP cameras, wireless LAN access point AP and

other PD devices, no need power cords and outlet socket.

1.2 Front and rear panel description

RJ45 port area on the front panel of switch:

It has 5 10/100/1000M Auto-Negotiation RJ45 ports (Auto MDI / MDIX) on the

front panel, it can connect to the LAN. Including a LINK/ACT/Speed LED each

port for port status indication, please read the table description for LED

function description.

PoE Ethernet Switch

Rear panel:

1.3 LED Indicator description

Switch indicators includes Link/Act/Speed, PoE, power status indicator.

Link/Act, PoE light is green, the power status indicator is green.

You can learn the switch work status by LED indicators. The following table

shows these indicators’ function:

LED

COLOR

STATUS

STATUS DESCRIPTION

Power

Green

Power ON

Off

Power OFF

LNK/ACT

Green

A device is connected to the port

Off

A device is disconnected to the port

Flashing

Sending or receiving data

PoE

Green

There is a PoE PD connected to the

port

Off

No PD connect to the port or the

power is not enough to supply PoE

device to work

PoE Ethernet Switch

1.4 Switch Features and Specifications

Features:

Comply with IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE802.3ab, IEEE

802.3af, IEEE802.3at standards

Supports IEEE802.3x flow control for full-duplex mode and backpressure

for half-duplex transfer mode

Support store and forward technology

5 x 10/100/1000MbpsAuto -negotiation MDI/MDIX RJ45 ports

Supports auto-negotiation function for UTP port, adjust the transmission

ways and the transmission speed automatically

Supports MAC address auto-learning

Dynamic LED indicator that provide a simple working status and

troubleshooting tips

Supports a maximum power 26W each PoE port and all power up to 75W

Specifications:

Supported standards and

protocols

IEEE802.3 10Base-T, IEEE802.3u 100Base-TX,

IEEE802.3af, IEEE802.3at, IEEE802.3ab

Network Media (Cable)

10Base-T: UTP category 3, 4, 5 cable (maximum 100m)

100Base-TX: UTP category 5, 5e cable (maximum 100m)

1000Base-T: UTP category 5e, 6 cable (maximum 100m)

Number of Ports

5 x 10/100/1000Mbps Auto-Negotiation RJ-45 ports

LED

indicator

10/100/100M

Link/Act/speed

PoE

Power light

Power

Transfer Method

Store-and-Forward

Backup bandwidth

10Gb/s

MAC Address Learning

Automatic learning, automatic aging, 2K MAC address

table

PoE Ethernet Switch

Packet filtering and

forwarding rate

10Mbps: 14880pps

100Mbps: 148800pps

1000Mbps:1488000pps

Dimensions (W × D × H)

280 x 179 x 44.5 mm

Environment

Operating Temperature: 0℃- 40℃

Storage Temperature: -40℃- 70℃

Operating Humidity: 10%~90% RH Non-condensing

Storage Humidity: 5%~95% RH Non-condensing

Power

AC 100V ~ 240V; Frequency 50/60Hz

PoE Ethernet Switch

2 Hardware installation

Before installing the switch, make sure that the following "packing list" listed

OK. If any part is lost and damaged, please contact your local agent

immediately. In addition, make sure that you have the tools to install switche

and cables in your hands.

One Switch

One power cord

This User Guide

Rubber foot pads

Mounting screws with two “L” planks

Note: This switch can be placed on a flat surface.

2.1 Power cord

Supports desktop and rack-mount installation, please follow below installation

tips:

Do not place heavy objects on the switch.

The equipment should be far from the power outlet about 1.5 meters.

Please check the power supply to ensure the connection safety carefully.

Make sure that leave sufficient ventilation around the devices, make the

switch work in a cool place.

Open the box, put the switch on the desk, please insert one side of power

regulator into AC outlet of switch, the other side will be insert into power

socket, if everything goes well, green "Power" indicators on the front panel

will be light, the other green light only flashes once.

2.2 Connect Computer (NIC) to the switch

Please insert the NIC into the computer, after installing network card driver,

please connect one end of the twisted pair to RJ-45 jack of your computer, the

other end will be connected to any RJ-45 port of switch, the distance between

switch and computer is max 100 meters. Once the connection is OK and the

devices are power on normally, the green Link/ACT status indicator lights

corresponding ports of the switch.

PoE Ethernet Switch

2.3 Switch Cascade Connection

The any port of switch can automatically identify straight cable and cross cable,

so no matter which port can be cascaded.

Among switch, another switch, hub can be connected by many ways, either

connect any port of this switch to any port of another switch by straight cable or

you can also connect any port of one switch to any port of another switch by

unshield Twisted pair RJ45, realize all switch cascade connection.

2.4 Switch connection to the PD

1-4 ports of switch have PoE power supply function, the maximum output

power up to 26W each port, it can connect PD devices, such as internet phone,

network camera, wireless access point work, provide five levels of 3.84 ~

25.5W electric power request. You only need to connect the switch PoE port

directly connected to the PD port by network cable.

2.5 RJ-45 Pin specification

Please note the cable-making methods, because cable which does not meet

the standards of the sequence data will make the data transmission speed

slow, unstable and even be blocked, the following chart represents that the

standard RJ-45 jack and the connector and pin definition:

Standard RJ-45 jack / connector

RJ-45 connector pin definitions

Pin Number

Signal

TX1 + (PoE Power+)

TX1 - (PoE Power+)

RX1 + (PoE Power-)

PoE Ethernet Switch

TX2 +

TX2 --

RX1 - (PoE Power-)

RX2 +

RX2 -

2.6 Notes

Switch support auto-negotiation function, while connecting other network

devices, the port LED indicators status depends on the negotiation results of

the operation mode, please refer to previous page status indicator table. If the

connection is OK, but the indicator does not light, please try to check if other

network cable is OK.

Please put the switch on a stable, dry and cool place and prevent falling.

Make sure the switch work properly, please make sure if the power voltage

matches with the power requirements of switch before using.

While switch works, network cable port can be freely inserted or removed

without disrupting the work of the switch.

Before cleaning the switch, first unplug the power, and wipe with a damp

fabric, without liquid.

Please prevent the switch from dusty areas and strong electromagnetic

interference area.

PoE Ethernet Switch

Table des matières

Autres manuels Comelit Changer

Comelit

Comelit IPSWP06N01A Manuel utilisateur

Comelit

Comelit IPSWP06N100A Manuel utilisateur

Comelit

Comelit 30001008 Manuel utilisateur

Comelit

Comelit IPSWN08N01A Manuel utilisateur

Comelit

Comelit IPSWP08N100A Manuel utilisateur

Comelit

Comelit IX9150 Manuel utilisateur

Comelit

Comelit IPSWP22N01A Manuel utilisateur

Comelit

Comelit IPSWP06N02A Manuel utilisateur

Comelit

Comelit IPSWSP24A Manuel utilisateur

Comelit

Comelit IPSWC160A Manuel utilisateur

Comelit

Comelit IPSWR030A Manuel utilisateur

Comelit

Comelit KSW3208LU Manuel utilisateur

Comelit

Comelit Simplebus Color 1224A Manuel utilisateur

Comelit

Comelit 1404 Manuel utilisateur

Comelit

Comelit IPSWP160A Manuel utilisateur

Comelit

Comelit IPSWP080A Manuel utilisateur

Comelit

Comelit IPSWP10N01A Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur