ComAp 3760XBI Manuel utilisateur

Measuring device 3760XBI

changements quant à la conception et quant aux spéciﬁ cations techniques de nos produits.

Page 1 - 00012 - ENG - 2021-12

Quick start

1. Introduction

Keyboard

ʻSwitches ON / OFF the instrument

MENU Display Menu or- Back to previous menu level

ZERO Reset or- Delete

cancel Cancel or- Back to previous level

OK Display (pressure, flow, Kv, date / hour) or- validates the selection

VALVE Valve selection or- Previous page from the list

PRESET Valve setting position or- Next page from the list

Reduces the value or Next field or Next element from the list

Increases the value or- Previous field or- Previous element from the list

Plug-(upstream)

Mini USB (Connection PC)

Plug+(downstream)

Measuring device 3760XBI

changements quant à la conception et quant aux spécications techniques de nos produits.

Page 2 - 00012 - ENG - 2021-12

2. Configuration

Pre-recorded valve selection

Before starting to measure, please specify the valve

Select a pre-recorded valve

VALVE Comap 750 AB

DN 20

To use identical valves several times, just modify the setting.

PRESET Max : 40

32.0

Min: 5

Enter the position indicated

on the display of the valve

Measure by kv value

If the valve cannot be found, and the value of the kv is known, the kv value is needed.

Proceed as previously to select in the valves list « Direct Kv » then « 0 – 50000 »

Enter the Kv value

PRESET Direct Kv

23.5

Min: 5

Enter the appropriate kv

value

Entering value

Each value is entered digit by digit

ZERO Deletes the last digit

Decreases the value of the digit (0-9

and .)

Validates and creates a new digit

Increases the value of the digit (0-9

and .)

PRESET Next field (OK)

3. Changing the fluid

The fluid type is displayed on the le bottom of the screen

MENU Fluid Select the type, concentra-

tion and temperature

4. Connect

Resetting

This procedure should be done when restarting the device. Recommended before all measure.

ZERO

1. Connect the hoses to the valve:

Red: Valve upstream

Blue: Valve downstream

OK OK

Measuring device 3760XBI

changements quant à la conception et quant aux spéciﬁ cations techniques de nos produits.

Page 3 - 00012 - ENG - 2021-12

2. Connect the red hose (R) to the instrument. The value is stabilizing aer a few seconds. Press OK

Connect

Plug +

Pressure

0.00

3. Connect the blue hose (B) to the instrument. The value is stabilizing aer a few seconds. Read the flow

Connect

Plug -

Pressure

0.00

5. Measure

Once the configuration is done, the instrument displays at any time the diﬀerential pressure, the flow, the valve, the setting of the valve, and the fluid.

6. Time period record

MENU Records New

Open

Remove

Before starting recording, select the valve.

Give a name to the record (see « entering values »)

Indicate the recording duration and the number of samples.

Start the recording. The instrument automatically puts into sleep mode to save battery, but keeps on recording.

Press to turn on the instrument.

Attention: DO NOT FORCE THE EXTINCTION, THIS MAY RESUME THE RECORDING

7. Valve in memory

Most of the valves from the following manufacturers are already pre-recorded in the instrument:

COMAP, Broen, Cimberio, Danfoss, Esbe, Heimeier, Herz, Honeywell, Oras, Oventrop, Quitus, TA, Tiemme, VIR

8. Valve in memory

The 3760XBI is able to work with projects by defining the global architecture of a network. Please refer to the user manual for more explanation on this

mode.

9. Work with project

The 3760XBI is able to work with projects by defining the global architecture of a network. Please refer to the user manual for more explanation on this

mode.

OK OK