ComAp L151006001 Manuel utilisateur

Connected heating solution

Connected head

Installation manual

• Read these instructions carefully before installation.

• Check that the thermostatic body of your radiator is

compatible with the heads:

> diameter: M28 or M30

> thread: 1.5 mm

• The 30 mm diameter adaptable heads are also

compatible with Danfoss RA thermostatic inserts and

bodies (adapter included in the universal pack).

• Handle the head with care.

• Keep good air circulation near the head.

• Do not cover the COMAP head.

Caution

app.

comapsmarthome.

com

Follow the installation

procedure online step by step

Visit the page

app.comapsmarthome.com

Download the COMAP Smart Home app

and start the installation of your product

Create your accout in the app

COMPATIBILITY

There are two types of radiator heads:

There are mainly, two standard types of connections of the head on the

thermostatic valve: M28 × 1.5 or M30 × 1.5 (corresponds to the diameter

and thread of the pipe in mm). Check the thermostatic valve on your

radiator before installation to see if it is compatible with the model you have

purchased.

The thermostatic heads

They are generally graduated from 1

to 5 and can be easily replaced by a

COMAP Smart Home head

The manual valves

If some of your radiators have manual

valves, we advise you to go through a

licensed installer to make your valve

compatible with the COMAP Smart

Home head.

Possible extensions

You can extend your installation and install up to 10 COMAP Smart Home heads (ref.

L150005001, L150006001, L150007001 depending on the thermostatic valve installed on

your radiator).

2 COMAP thermostatic heads

1 gateway

*according to the reference you purchased, see page 12

4 AA LR6 batteries 1 ethernet

cable

1 USB cable

2 M30/M28 adapters* 2 Danfoss adapters*

KIT CONTENT

INSTALLATION PRINCIPLE

The COMAP head can be mounted on each of your water radiators.

The gateway connects to the internet box.

The heads communicate with the gateway by radio waves (868MHz). The

maximum distance between the gateway and the heads depends on the structure

of your house (wall thickness, materials...) and the radio environment.

Description of the head

Gateway

Temperature

sensor

LED Display

Handwheel

to change the

setpoint

Piston

Mounting

nut

Head Head

DISPLAY OF THE HEAD

Pictogram Meaning Action

Starting of the head Wait a few seconds

Update of the head Wait for 1 to 2 minutes

Low battery level Remember to change the batteries

Critical battery level, the

heads doesn't control the

temperature anymore.

Change the batteries to recover the head

functionnalities

Communication problem

1. Disconnect and reconnect the internet box

gateway. The two lights on the gateway should be

green and steady.

2. If the gateway has both lights fixed aer the

restart and the head continues to display these

pictograms, contact customer service.

Radio range limit Your thermostatic head is at the limit of radio range, a

repeater may be necessary, contact customer service.

The calibration is

inconsistent

1. Remove the head from the radiator.

2. Remove the batteries for 30s and reinsert them.

3. Observe if the head piston makes a back and forth

movement.If Yes: Remove the batteries. - remount the

head. - Reinsert the batteries to restart the calibration.

- If the error persists, contact customer service.

If No: contact the customer service

The radiator valve has not

been detected during the

calibration.

1. Make sure that the head is properly installed on the

thermostatic body (Tightening, no clearance)

2. Restart the calibration by removing the batteries for

10s and putting them back in.

3. If the problem persists, contact customer service.

INSTALLATION

19.5

1. Download the COMAP application. Go to the App Store or Google Play to

download the "COMAP Smart Home" application.

2. Create your account on the application. Follow the steps to create an ac-

count on your COMAP Smart Home application

3. Connect the gateway to your internet box

The first light (power light) on the

gateway lights up.

The second light on the gateway

(communication light) lights up and flashes,

then becomes steady aer 1 to 2 minutes.

7. Step only necessary for the first head

installed: In the installation path of the

application or web interface, enter the

serial number of one of the heads. The

serial number is placed on the label on

the bottom of the head.

8. The other heads automatically appear in

the application as they communicate.

9. Once the heads are set up in the

application, proceed with the assembly

of the heads.

19.5

5. Place the heads within 40cm of

the gateway.

6. Turn the ring to wake up each

head next to the gateway.

4. Insert the batteries into the head

a. Slide the handwheel forward

b. Insert the batteries in the direction

indicated in the battery compartment.

Mounting the heads

12. Remove one battery of the head.

If your valve has a thread but

the head nut does not screw on

because it is too big, screw on the

adapter M30/M28 if you have a

universal kit.

11. If necessary, add an adapter

10. Remove the current head.

If your insert or thermostatic body

is of the Danfoss RA type: separate

the two plastic parts of the adapter.

Screw the Danfoss adapter

corresponding to your model onto

the radiator tube.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels ComAp Contrôleurs

ComAp

ComAp InteliNano MRS 3 Manuel

ComAp

ComAp InteliGen NTC Manuel d'utilisation et d'entretien

ComAp

ComAp InteliSys NTC BaseBox Manuel d'utilisation et d'entretien

ComAp

ComAp InteliDrive Mobile Manuel utilisateur

ComAp

ComAp InteliLite MRS16 Manuel utilisateur

ComAp

ComAp InteliMains 210 BTB Manuel utilisateur

ComAp

ComAp InteliLite 9 Manuel utilisateur

ComAp

ComAp InteliLite NT MRS Manuel utilisateur

ComAp

ComAp ECON-4 Manuel utilisateur

ComAp

ComAp InteliNano NT Plus Manuel utilisateur

ComAp

ComAp IG-NT Manuel utilisateur

ComAp

ComAp IL-NT MRS15 Manuel utilisateur

ComAp

ComAp intelilite nt amf20 Manuel utilisateur

ComAp

ComAp IG-NT Manuel utilisateur

ComAp

ComAp InteliLite MRS10 Manuel utilisateur

ComAp

ComAp ECON-4 Manuel d'instructions

ComAp

ComAp IGS-NT Series Manuel utilisateur

ComAp

ComAp IG-NT GC Manuel utilisateur

ComAp

ComAp InteliLite4 AMF20 Manuel

ComAp

ComAp InteliCompact NT Manuel

ComAp

ComAp InteliDrive DCU Marine Manuel utilisateur

ComAp

ComAp IG-NT Manuel utilisateur

ComAp

ComAp InteliNano NT MRS Manuel utilisateur

ComAp

ComAp InteliLite NT AMF 25 Manuel

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

Emerson

Emerson SW93 Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Panasonic

Panasonic FP? Positioning Unit RTEX Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Siemens

Siemens OpenAir GMA 1 Series Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur