Control elements
Intended use
Display
Key eld
3Baery compartment
4Connecon thread 3/4“ for hose coupling
5Sieve insert
6Retaining bracket
7Water outlet
8Storage tank for quanty 1
9Storage tank for quanty 2
Manual dosing / zeroing
Seng the quanty + /-
Start buon / pause
l :
Store these instructions for the future.
the operating instructions and the applicable regulations
For safety reasons, children and adolescents under the age
of 16 as well as persons who have not familiarised them-
selves with this operang manual may not use this product.
Persons with restricted physical or mental abilies may
only use the product if supervised or instructed by a com-
petent person.
Children must be supervised in order to ensure that they
do not play with the product.
Never use the device if you are red or ill or under the in-
uence of alcohol, drugs or medicaon.
Do not use in freezing condions. Freezing water will de-
stroy the device.
Only connect the supply hose to the provided connecon,
not to the water outlet!
Only intended to be used with the suitable hose couplings
with ¾“ thread.
Avoid tensile loads: Do not pull at the connected hose.
The Collomix AQiX water dosing system is intended for use
by professionals or trained personnel on construcon sites
for the precise addion of water for mixing building chem-
ical products (such as mortar, plaster, screed, concrete, ll-
ers and the like).
It is used to precisely meter amounts of water.
The water dosing system may only be used with clear
freshwater at a water temperature of up to 40°C.
The Collomix AQiX water dosing system is not designed for
industrial use.
It is not permied to use the meter with salt water, chem-
icals, foodstus, spirits, highly ammable and explosive
substances as well as compressed air. Using these sub-
stances may destroy the device.
The operang temperature must be between +5°C and
+50°C. Do not expose the device to direct sunlight for
longer periods of me.
The water pressure in the line must be between at least 2
and a maximum of 6 bar so that the device works awlessly.
Please note that this device is not a calibrated meter.
Fluctuaons can be caused by factors such as varying
water pressure, etc.
You have purchased the new AQiX water dosing system.
Please note that this is a meter and it should be handled
with care. These instrucons contain important and useful
informaon for how you should use the device. Please read
the instrucons carefully.
The numbers in the text relate to the overview on page 2.
Technical data
Measurable water quanty: 1 - 99 litres
Min. / max. operang pressure 2 - 6 bar
Device operang temperature + 5°C - + 50°C
Flow medium Clear freshwater
Flow speed min. - max. 10 ltr/min - 25 ltr/min
Max. water temperature + 40°C
Accuracy 1-3 litre ± 60 ml
> 3 l ± 2%
IP protecon class IP 64
Baeries 2 x AA/IEC LR6 1.5 V
Weight 688 grammes
EN
