Collective Minds Switch Up Manuel utilisateur
Switch Up
TM
Manual V1.2
For videos and tutorials and more information about the Switch UpTM device please visit:
https://www.switch-up.ca
WARNING: READ THIS BEFORE
ATTEMPTING TO USE YOUR SWITCH UP
DEVICE
BEFORE YOU CONNECT THE SWITCH UPTM DEVICE TO THE SWITCHTM DOCK, YOU
MUST NAVIGATE TO THE SWITCHTM “SYSTEM SETTINGS” AND SET “PRO
CONTROLLER WIRED COMMUNICATION” TO “ON”. Not doing so will result in an
“Error Code 2011-0301”, requiring you to disconnect the Switch UpTM from the console,
then reboot the SwitchTM, and then change the setting to “ON”. You can now plug in
your Switch UpTM and enjoy without issue.
The “Controller and Sensors” setting for the Pro Controller Wired Communication must
be set to “ON”.
This error will occur if the Pro Controller Wired Communication is set to “OFF”. You are
now required to disconnect the Switch UpTM from the SwitchTM console and then reboot
the SwitchTM console. Now go to the “Controller and Sensors” settings and then from the
Pro Controller Wired Communication option, set it to “ON”.
SWITCH UPTM INITIAL SETUP
INSTRUCTIONS
OVERVIEW
Use the Switch UpTM to play the SwitchTM console with Joy-ConTM/SwitchTM Pro/Wii UTM
Pro/Xbox OneTM/Xbox 360TM/PlayStation 4TM/PlayStation 3TM controllers.
UPDATING YOUR SWITCH UPTM
Before using the Switch UpTM device, it is important to make sure your device is updated.
To do this download the Collective MindsTM Updater software below and use the
application to update your Switch UpTM device to the latest version.
Updater : Windows Version Download Mac Version Download
Updating Steps:
1. Open the update tool
on your computer.
Plug in your Switch UpTM device into an open USB port.
2. Once the Switch UpTM
device is detected,
click on the Device
Name in the Update
Tool.
3. On the Firmware
Selection screen
simply click Continue.
4. Your Switch UpTM is
now ready to be
updated. Click on
Begin Update to start
the process.
5. The Switch UpTM
device will now begin
receiving the latest
update. DO NOT remove your switch device while the update is in progress.
6. When you see
“Update Completed”
you can safely
remove your Switch
UpTM device from your
computer and begin
enjoying it.
MODE ACTIVATION
There are three modes. Standard Mode, Mario Mode, and Zelda Mode. To select modes
simply PRESS & RELEASE the Mode Select button until it turns RED (Mario Mode) or
GREEN (Zelda Mode) or back to WHITE (Standard Mode).
CONNECTING THE SWITCH UPTM AND A CONTROLLER
BEFORE YOU CONNECT THE SWITCH UPTM DEVICE TO THE SWITCHTM DOCK, YOU
MUST NAVIGATE TO THE SWITCHTM “SYSTEM SETTINGS” AND SET “PRO
CONTROLLER WIRED COMMUNICATION” TO “ON”. Not doing so will result in an
“Error Code 2011-0301”, requiring you to disconnect the Switch UpTM, then reboot the
SwitchTM, and then change the setting to “ON”.
The Switch UpTM supports Joy-ConTM/SwitchTM Pro/Wii UTM Pro/Xbox OneTM/Xbox
360TM/PlayStation 4TM/PlayStation 3TM controllers. The SwitchTM will see any controller
you connect to the Switch UPTM device, as a SwitchTM Pro Controller.
With a PlayStation 4TM controller connected to the Switch UpTM, the TOUCHPAD button
acts as the CAPTURE button for the SwitchTM.
WIRED CONTROL: The simplest connection of a controller is through a wired
connection. Simply connect your SwitchTM Pro/Wii UTM Pro/Xbox OneTM/Xbox
360TM/PlayStation 4TM/PlayStation 3TM controller directly to the Switch UPTM with their
respective controller cables. Once you have done this, you can enjoy wired play.
WIRELESS CONTROL:
To use a wireless controller with your Switch UpTM you will have to first pair your wireless
controller with the Switch UpTM device. Each controller has a simple wireless pairing
method as follows. Switch ProTM/Wii UTM Pro/Xbox OneTM/Xbox 360TM/PlayStation
4TM/PlayStation 3TM controllers can be used wirelessly after pairing.
OR
PlayStation 4
TM
Wireless Controller Pairing
- Simply put your
PlayStation 4TM controller into pairing mode and press the
Bluetooth Sync button on your Switch UpTM device. Step by Step
Instructions below.
1. Ensure your Switch UpTM device is plugged into the SwitchTM Dock.
2. Ensure your wireless PlayStation 4TM controller is off.
3. Place your PlayStation 4TM controller into Bluetooth pairing mode by holding the
SHARE and HOME buttons for 5 seconds or until the light bar flashes WHITE.
4. Now press the Bluetooth pairing button on the Switch UpTM device. The LED will
flash BLUE to show Bluetooth pairing has begun.
5. Within a few seconds the LED will be WHITE indicating that pairing is complete.
6. The light bar on the PlayStation 4TM controller should be BLUE and you are now
connected to the Switch UpTM device and ready to use your PlayStation 4TM
controller wirelessly.
PlayStation 3
TM
Wireless Controller Pairing
- Connect the PlayStation 3TM controller via a
wired connection first. Then remove the wired connection and your PlayStation 3TM
controller will automatically pair to Switch UpTM device. Step by
Step Instructions below.
1. Ensure your Switch UpTM device is plugged into the
SwitchTM Dock.
2. Plug your PlayStation 3TM controller into your Switch UpTM
device. The Player LED indicator on your PlayStation 3TM
controller will light up.
3. Now remove the wired connection, and your PlayStation 3TM controller Player LED
indicators will begin to flash.
4. After a few seconds only one Player LED indicator will light up.
5. You are now connected to the Switch UpTM device and ready to use your
PlayStation 3TM controller wirelessly.
Xbox One
TM
Wireless Bluetooth Controller Pairing
- Simply put your XboxTM controller into
sync mode and press the Bluetooth Sync button on your Switch UpTM device. Step by
Step Instructions below.
1. Ensure your Switch UpTM device is plugged into the
SwitchTM Dock.
2. Turn on your Xbox OneTM Wireless Bluetooth Controller.
3. Press the SYNC button on your controller.
4. Now press the Bluetooth pairing button on the Switch UpTM device. The LED will
flash BLUE to show Bluetooth pairing has begun.
5. Within 30 seconds the LED will be WHITE on the Switch UpTM device and the
Xbox OneTM Wireless Bluetooth Controller will vibrate indicating that pairing is
complete.
6. You are now connected to the Switch UpTM device and ready to use your Xbox
OneTM Bluetooth Controller wirelessly.
7. If your controller is not connected, remove the batteries then re-insert them and
repeat the process above.
Xbox One
TM
Wireless Controller Pairing
- To connect a
non-bluetooth Xbox OneTM controller you must use an Xbox
OneTM Wireless Adapter (sold separately). Connect the Xbox
OneTM controller via a wired connection first. Then remove the
wired connection and plug the Xbox OneTM Wireless Adapter
into your Switch UpTM device. Step by Step Instructions below.
1. Ensure your Switch UpTM device is plugged into the
Switch Dock.
2. Plug your Xbox OneTM controller into your Switch UpTM device. It will vibrate to
indicate it is paired to your Switch UpTM device.
3. Now remove the wired connection, and your Xbox OneTM controller HOME button
will begin to flash.
4. Insert the Xbox OneTM Wireless Adapter.
5. Within a few seconds the Xbox OneTM Wireless Adapter LED will go WHITE and
your Xbox OneTM Wireless Controller HOME button will stay solid indicating that
pairing is complete.
6. You are now connected to the Switch UpTM device and ready to use your Xbox
OneTM controller wirelessly.
7. If your controller is not connected, remove the batteries then re-insert them and
repeat the process above.
Xbox 360
TM
Wireless Controller Pairing
- To connect a Xbox 360TM Wireless
Controller you must use an Xbox 360TM Wireless Gaming Receiver (sold
separately). Connect the Xbox 360TM Wireless Gaming Receiver to the Switch
UpTM device. Now sync with your Xbox 360TM Wireless Controller. Step by Step
Instructions below.
1. Ensure your Switch UpTM device is plugged into the SwitchTM Dock.
2. Plug your Xbox 360TM Wireless Gaming Receiver into your Switch UpTM device.
3. Turn on your Xbox 360TM Wireless Controller.
4. Press the SYNC button on your Xbox 360TM Wireless Controller until the HOME
button begins flashing.
5. Now press the SYNC button on the Wireless Gaming Receiver.
6. Within a few seconds the Xbox 360TM Wireless Controller HOME button will stay
solid indicating that pairing is complete.
7. You are now connected to the Switch UpTM device and ready to use your Xbox
360TM controller wirelessly.
Switch
TM
Pro Wireless Controller Pairing
- Simply put your SwitchTM Pro Controller into
sync mode and press the Bluetooth Sync button on your Switch
UpTM device. Step by Step Instructions below.
1. Ensure your Switch UpTM device is plugged into the
SwitchTM Dock.
2. Ensure your wireless SwitchTM Pro Controller is off.
3. Place your SwitchTM Pro Controller into Bluetooth pairing
mode by pressing the SYNC button at the top for a few
seconds.
4. The player indicators at the bottom of the SwitchTM Pro Controller will now begin
to cycle.
5. Now press the Bluetooth pairing button on the Switch UpTM device. The LED will
flash BLUE to show Bluetooth pairing has begun.
6. Within a few seconds the LED on the Switch UpTM device will be WHITE indicating
that pairing is complete.
7. The player indicators on the SwitchTM Pro Controller will light up one player
indicator LED.
8. You are now connected to the Switch UpTM device and ready to use your SwitchTM
Pro Controller wirelessly.
Table des matières
Autres manuels Collective Minds Accessoires de jeux vidéo
Collective Minds
Collective Minds Cronus Zen Manuel utilisateur
Collective Minds
Collective Minds STRIKE PACK DOMINATOR Manuel utilisateur
Collective Minds
Collective Minds HORIZON STRIKEPACK Manuel utilisateur
Collective Minds
Collective Minds STRIKEPACK F.P.S. Dominator Manuel utilisateur
Collective Minds
Collective Minds STRIKEPACK F.P.S. Dominator Manuel utilisateur
Collective Minds
Collective Minds DriveHub Manuel utilisateur
Collective Minds
Collective Minds Cronus Zen Manuel utilisateur
Manuels Accessoires de jeux vidéo populaires d'autres marques
Sega
Sega Visual Memory Unit Manuel utilisateur
Datel
Datel Go-tcha Expedition Manuel utilisateur
TruGolf
TruGolf TruFlight 2 Manuel utilisateur
CH Products
CH Products CH PRO THROTTLE Manuel utilisateur
Thrustmaster
Thrustmaster T2PA Manuel utilisateur
Cube Controls
Cube Controls Mercedes-AMG - GT Edition SIM Wheel Manuel utilisateur
