Colebrook Bosson Saunders Loop CPU/012 Mode d’emploi

Installation Instructions

for Loop CPU holder

CPU/012PARTS INCLUDED:

Loop CPU

Holder

Locknut

CPU-012-INST-B-SEPT 2017

WARNING

• Ensure desk is suitable to take the weight of the CPU holder and CPU.

• Do not use this product for any purpose other than that for which it was designed.

• Hold the CPU tightly when making adjustments.

• Care should be taken to avoid trapping ngers.

• Do not dismantle or modify the CPU cradle.

• Supported weight must not exceed 20kg (44.1lb) per cradle.

MAINTENANCE AND INSPECTION

• Ensure all screws and xings are fully tightened and occasionally re-tighten if necessary.

• Clean with a dampcloth. DO NOT use solvents.

DISCLAIMER

• The use of power tools, lever bars or excessive force during the installation, or

reconguration of the product will invalidate your guarantee.

• Failure to observe the recommendations in the use, and conguration of these products

may aect your guarantee.

• As part of Colebrook Bosson Saunders ongoing product improvement programme, the

design of products may change without prior notice and details may vary from those illustrated.

CPU/012

Keyed metal

washer

Nylon

washer

Allen

Key

CPU DESK FITTING SUPPLIED SEPERATELY

240

500

80 225

Min/Max CPU Dimensions

MAX

PATENTS

Colebrook Bosson Saunders hold a number of patents and other

intellectual property rights covering our products and processes.

You can nd patent information on our website at:

www.colebrookbossonsaunders.com/patents

REMOVE ALLEN KEY, NUT AND WASHERS

FROM LOOP CPU HOLDER

1TAKE SLIDER FROM CPU FIXING KIT

(ORDERED SEPERATELY) AND FIT INTO POSITION

TIGHTEN WASHER AND LOCK NUT ONTO PIN

IMPORTANT NOTE

Ensure nut is fully tightened

(6nm recommended

minimum torque)

SLIDE CPU INTO THE LOOP

IMPORTANT NOTE

Moulding should be positioned

in the centre of the CPU

ROLL RATCHET WHEEL

TO TIGHTEN STRAP TO CPU

5ADDITIONAL TIGHTENING

REQUIRED USING ALLEN

KEY PROVIDED

6PLACE ALLEN KEY INTO

STORAGE HOLE

MOUNTING CPU FIXING KIT TO DESK

Make sure the CPU

will be able to rotate

from side to side

[OPTIONAL] TO REMOVE LOOP

Unmount CPU from desk following

reverse procedure from step 8c

Use tool to push down on release button

and hold whilst pulling strap downwards

IMPORTANT NOTE

Ensure strap is fully tightened

8A 8B

Table des matières

Autres manuels Colebrook Bosson Saunders Support et étagère

Colebrook Bosson Saunders

Colebrook Bosson Saunders OLLIN Manuel utilisateur

Colebrook Bosson Saunders

Colebrook Bosson Saunders AV/VC Intro AVS/031/001 Manuel utilisateur

Colebrook Bosson Saunders

Colebrook Bosson Saunders Lima LMA/001/001 Manuel utilisateur

Colebrook Bosson Saunders

Colebrook Bosson Saunders AV/VC One Codec Mount Manuel utilisateur

Colebrook Bosson Saunders

Colebrook Bosson Saunders Lima LMA/001/001 Manuel utilisateur

Colebrook Bosson Saunders

Colebrook Bosson Saunders AV/VC One Manuel utilisateur

Colebrook Bosson Saunders

Colebrook Bosson Saunders Lima LMA/001/001 Manuel utilisateur

Colebrook Bosson Saunders

Colebrook Bosson Saunders AV/VC One AVS/021/FAN1 Manuel utilisateur

Colebrook Bosson Saunders

Colebrook Bosson Saunders AV/VC Intro AVS/031/CAM 1 Manuel utilisateur

Colebrook Bosson Saunders

Colebrook Bosson Saunders AV/VC One AVS/021/RM1 Manuel utilisateur

Colebrook Bosson Saunders

Colebrook Bosson Saunders AV/VC Intro AVS/031/SLF1 Manuel utilisateur

Colebrook Bosson Saunders

Colebrook Bosson Saunders Ollin OLN/009 Manuel utilisateur

Colebrook Bosson Saunders

Colebrook Bosson Saunders AV/VC One AVS/021/FB1 Manuel utilisateur

Colebrook Bosson Saunders

Colebrook Bosson Saunders Lima LMA/001/001 Manuel utilisateur

Colebrook Bosson Saunders

Colebrook Bosson Saunders AVALL Complete Manuel utilisateur

Colebrook Bosson Saunders

Colebrook Bosson Saunders Lima Manuel utilisateur

Colebrook Bosson Saunders

Colebrook Bosson Saunders AV/VC One AVS/021/WBK1 Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur