CODEL Energy Tech 301 Mode d’emploi

Technical Manual

Issue: A

Revision:1

Date:21/11/16

Ref:100246

Energy Tech 301

Installation, Commissioning,

Operating & Maintenance Manual

CODEL International Ltd.

Station Building, Station Road, Bakewell, Derbyshire DE45 1GE United Kingdom

t : +44 (0) 1629 814 351 f : +44 (0) 8700 566 307 e : [email protected] web : www.codel.co.uk

Technical Manual

Issue: A

Revision: 1

Date:21/11/16

Ref:100246

Technical Manual

Issue: A

Revision: 1

Date:21/11/16

Ref:100246

CODEL International Ltd is a UK company based in the heart of the Peak District National Park at

Bakewell, Derbyshire. The company specialises in the design and manufacture of high-technology

instrumentation for the monitoring of combustion processes and atmospheric pollutant emissions.

The constant search for new products and existing product improvement keeps CODEL one step

ahead. With a simple strategy, to design well-engineered, rugged, reliable equipment, capable of

continuous operation over long periods with minimal maintenance, CODEL has set standards both for

itself and for the rest of the industry.

All development and design work is carried out ‘in-house’ by experienced engineers using proven

state-of-the-art CAD and software development techniques, while stringent assembly and test

procedures ensure that the highest standards of product quality, synonymous with the CODEL name,

are maintained.

High priority is placed upon customer support. CODEL’s dedicated team of field and service

engineers will assist with any application problem to ensure that the best possible use is derived from

investment in CODEL quality products.

If you require any further information about CODEL or its products, please contact us using one of the

numbers below or alternatively visit our web site.

t : +44 (0) 1629 814 351

f : +44 (0) 8700 566 307

e : [email protected]

web : www.codel.co.uk

CODEL offices, Bakewell, Derbyshire

Technical Manual

Issue: A

Revision: 1

Date:21/11/16

Ref:100246

Technical Manual

Issue: A

Revision: 1

Date:21/11/16

Ref:100246

Important

The warning signs (and meanings) shown below, are used throughout these instructions and are

intended to ensure your safety while carrying out installation, operation and maintenance procedures.

Please read these instructions fully before proceeding.

Caution, risk of electric shock.

Caution, risk of danger.

Caution, hot surface.

Earth (ground) terminal.

Protective conductor terminal

Any important information in this manual is preceded by this sign.

Warning ! We wish to point out that the maximum rating of the Alarm Output Relay is now 60W

@ 250V max. Please bear this in mind when ordering the output cable, if not

supplied with EnergyTech 301 by CODEL.

Technical Manual

Issue: A

Revision: 1

Date:21/11/16

Ref:100246

Technical Manual

Issue: A

Revision: 1

Date:21/11/16

Ref:100246

Table of Contents

1. General Description 8

2. Specification 9

3. Principles of Operation 11

4. Description 12

5. Installation 13

6. Commissioning 20

7. Maintenance 22

Technical Manual

Issue: A

Revision: 1

Date:21/11/16

Ref:100246

1.General Description

Continuous Indicative Particulate Monitoring

With the recent increase in world-wide environmental legislation, there has evolved a general

requirement for operators to monitor the performance of their dust collectors and ensure that

emissions to atmosphere are kept below the maximum legal enforcement level.

In the case of small collectors or non-critical processes, it has been accepted by legislators in the UK,

that low cost continuous indicative particulate monitors may be used. These devices give an output

that shows the operator a relative increase or decrease in dust loading and have the facility to initiate

alarms if an unacceptable level is exceeded. Such instruments are described as ‘indicative’ and are

not intended to give quantitative results. They are normally set up using subjective criteria and

without reference to a standard gravimetric stack test.

The better indicative monitors, such as Energy Tech 301, have an analogue and RS485 output that

can be used to constantly record the output from the instrument and enable the operator to review the

results and identify impending filter failure at an early stage. The results may also be used to show

evidence of good practice to environmental authorities.

Whilst it is not recommended to calibrate this class of instrument in mg/m3, the operator may wish to

set an alarm point with reference to a specific mass concentration of particulate required by law. This

manual will show a method that satisfies this requirement using a single iso-kinetic stack test.

If emissions are required to be quantified in mg/m3 on a continuous basis, then please contact Codel

for advice.

Technical Manual

Issue: A

Revision: 1

Date:21/11/16

Ref:100246

2. Specification

Electronics enclosure

Aluminium casting

Access via lid

2 LED's :

oalarm LED

orelative dust level LED

Epoxy paint finish :

ocolour RAL5010 Traffic Blue

Damping :

omenu driven

Sensitivity :

omenu driven

Alarm level :

omenu driven

Power Requirement:

o85 - 265V A.C.

o25 VA, 0.25 A max

Outputs :

o1 x 4-20mA output

o1 x Contact output -

oRS485 Modbus

Display :

o16 x 2 LED Display

oflashing green LED where the pulse duration increases with dust level

ored alarm LED

Enclosure weatherproofing :

oto IP67 standard

Mains Connection :

oIP67 4-way plug and socket

Output Connections :

oIP67 7-way plug and socket

Intrusive Probe

Stainless steel bar Ø12mm2

Available lengths 250, 500, 750, 1000mm (customer requirement)

Probe protection :

oinsulating sleeve on first 200mm of probe

Technical Manual

Issue: A

Revision: 1

Date:21/11/16

Ref:100246

Temperature Constraints

Stack gas

o-20oC to +200oC

Operating Range (typical)

0 - 2500mg/m3 mass concentration

Particle size range 0.1 to 100µm

Cabling (if supplied by Codel)

Mains cable : 3-core, PVC insulated, 24/0.2mm

Output cable : 8-core, PVC insulated, screened, 16/0.2mm, Ø9.5mm maximum. Core

colours - green, brown, yellow, violet, white, black, red and blue (not used).

Note; if the cable length is greater than 1km it is recommended to use cable spec 0.75mm2~24/0.2. If

unsure please contact Codel.

Table des matières

Autres manuels CODEL Instrument de mesure

CODEL

CODEL Tunnel Tech 700 Series Manuel utilisateur

CODEL

CODEL TunnelTech 601 Manuel utilisateur

CODEL

CODEL TunnelTech 500 Series Manuel utilisateur

CODEL

CODEL Energy Tech 401 Manuel utilisateur

CODEL

CODEL Tunnel Tech 500 Series Manuel utilisateur

CODEL

CODEL DCEM2000 Manuel utilisateur

CODEL

CODEL GCEM4000 Manuel utilisateur

CODEL

CODEL EnergyTech 203 Manuel utilisateur

CODEL

CODEL EnergyTech 100 Series Mode d’emploi

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur