Cms Products MACV2ABS 160GB Manuel utilisateur
Getting Started Guide
For Windows®and Macintosh®
Connecting the ABSplus w/ USB2.0 Interface..................... 2
Connecting the ABSplus w/ FireWire®Interface.................. 3
Windows Software Installation............................................. 4 - 6
Macintosh Software Installation........................................... 7 - 9
CMS Support....................................................................... 10
Automatic Backup System
510223.2
Connecting the ABSplus w/ USB2.0 Interface
2
1Desktop USB User: Connect the power supply to the ABSplus drive and theAC power cable
to a power outlet, and turn the ABSplus on. The blue power LED should be illuminated.
Notebook USB Users: If your computer does not have enough power to start your ABSplus
drive use the included extension cable with the additional Power connector. The connectors
are labeled DATA and POWER. You will need to use both connectors.
2Connect the ABSplus USB cable to the USB port on your computer. The USB port is
usually identied by USB or the USB logo.
If you cannot locate a USB port, refer to your computer documentation.
3Connect the other end of the USB cable to the ABSplus.
4The Windows®XP, and 2000 operating systems will recognize the new hardware and
congure accordingly.
5Verify that the ABSplus drive can be seen in the ‘My Computer’ option of the Windows®
Start menu; if not, check all cable connections to the ABSplus and reboot the computer.
You are now ready to install the BounceBack Professional software (see “Installing the
Software”).
USB
DATA POWER
Connecting the ABSplus w/ FireWire Interface
3
1Desktop FireWire users: Connect the power supply to the ABSplus drive and the AC
power cable to a power outlet, and turn the ABSplus on. The blue power LED should be
illuminated.
Notebook FireWire users: FireWire ABSplus units are supplied with standard 6-Pin to
6-Pin cables. 6-Pin FireWire ports supply power and data to the ABSplus unit.
4-Pin mini-1394a FireWire connectors, found on some computers, provide data only and
require a power kit.
Power kits are available at: www.cmsproducts.com/product_accessories.htm.
2Connect the ABSplus FireWire cable to the FireWire port on your computer. The FireWire
port is usually identied by 1394a, the FireWire logo or the iLink logo.
If you cannot locate a FireWire port, refer to your computer documentation.
3Connect the other end of the FireWire cable to the ABSplus.
4Verify that the ABSplus drive can be seen in the ‘My Computer’ option of the Windows®
Start menu; if not, check all cable connections to the ABSplus and reboot the computer.
You are now ready to install the BounceBack Professional software (see “Installing the
Software”).
FireWire
6-Pin
4-Pin
! IMPORTANT: Before You Begin (Windows®)
1 If your computer does not have .NET Framework installed, the BounceBack CD will install Framework before
continuing the installation, follow the on screen prompts.
2 Activation codes: BounceBack software requires an activation code, the code may be found on the ap of
the BounceBack CD shipped with the product.
3If you are running a virus protection program, temporarily disable it (if you can) by clicking on the icon for the
anti-virus program in the system tray found in the lower right corner and following the disable instructions.
This will increase the speed of your rst backup.
4If you are running Windows®XP or 2000 in a corporate environment, you will need to log on as a local
administrator. Check with your local System Administrator for more details.
5If you are using an external device for the backup, make sure it is connected and working correctly with the
Windows operating system.
6Disconnect any other external storage devices (i.e., HDD, DVD, CDR, MP3 players, etc.) including any
devices in or attached to notebook docking stations.
Windows Installation
4
Installing The BounceBack Software
Windows Installation
5
1Insert the BounceBack Professional CD.
2The BounceBack CD menu screen should appear automatically. If it doesn’t, double click on the CD icon in
the ‘My Computer’ window.
3Click Install on the BounceBack menu.
4Follow the on-screen instructions to install the software.
5 At the Activation Window enter your Activation code located on the ap of the CD envelop. Your rst backup
is described in “Your First Backup.”
Your First Backup
1 Once the software installation is complete, the BounceBack software will begin to congure your rst backup.
During the setup process you will be prompted to select the type of backup and the target location where you
will back your data up to.
2The Backup type window offers you the choice of what you would like to be backed up. Your choices are as
follows;
Full System Backup - creates a bootable complete backup of your system
My Documents - backs up your “My Documents” folder
Let Me Choose - Allows you to select les and folders to backup
Your First Backup Continued...
Windows Installation
6
Next you will be offered a list of devices to back up to. Select the device you wish to back up to and click
“Next”.
Note: If you have chosen Full System Backup the device you choose to back up to will be formatted
and partitioned and everything on that device will be erased.
If you choose to change the “default” backup created, you can edit your backup at anytime. Please refer to
the full Manual integrated into the BounceBack Control Center, open the Control Center and click the Green
Question Mark icon.
3
4
Macintosh Installation
7
! IMPORTANT: Before You Begin (Macintosh®)
Activation codes: BounceBack software requires an activation code, the code may be found on the ap of
the BounceBack CD envelop shipped with the product.
If you are running a virus protection program, temporarily disable it (if you can). This will increase the speed
of your rst backup.
When the Authenticate dialog box is displayed, you will need to enter your administrator name and
password.
If you are using an external device for the backup, make sure it is connected and working correctly with the
Mac operating system. The ABSplus will appear as a volume on the desktop.
Disconnect any other external storage devices (i.e., HDD, DVD, CDR, MP3 players, etc.) including any
devices in or attached to notebook docking stations.
Mac OS X Special Requirements
•Full backups require you to install BounceBack Professional on the system you will be backing up.
1
2
3
4
5
Partitioning & Formatting An External Drive
Macintosh Installation
8
1
2
3
Formatting
Using Apple’s Disk Utility program (found in the Applications folder inside Utilities), the external backup drive
may be formatted on Mac OS X. (Choose Mac Extended format.) When erasing the External drive with Apple
Disk Utility, be sure to select the drive and not the volume. (Selecting the drive will repartition the drive).
Do not use DOS format for backups.
Partitioning
While you can use Apple’s Disk Utility program to partition the FireWire backup drives, we do not recommend
it. A single partition is optimal for the backup drive. If you are backing up multiple computers, and want
each backup to be bootable, see “Backing up Multiple Computers” in the manual for detailed instructions on
installing BounceBack Software and partitioning the FireWire external drive.
Installing The BounceBack Software
The BounceBack Professional “Double Click Me” icon should appear automatically. If it doesn’t, double
click on the BounceBack Professional CD icon on the Desktop and then double click on the BounceBack
Professional “Double Click Me” icon.
Click Install in the BounceBack Professional menu.
Follow the on-screen instructions to install the software.
Macintosh Installation
9
Your First Backup
1
2
3
4
Once the software installation is complete and your system has rebooted, the BounceBack software will begin
to congure your rst backup. During the setup process you will be prompted to determine the target location
where you will back your data up to.
At the Activation Window enter your Activation code from the ap of the CD envelop.
Click Yes to use a second internal hard drive or external drive as the backup device. Click No to direct the
backup to your primary hard drive.
If you choose Yes and you have both a second internal drive and external hard drive, the BounceBack
software will detect it and then prompt you to choose which hard drive to use. Select your choice Use Internal
Drive or Use External Drive.
a. Once you have selected the target location, the BounceBack software will scan your
computer to determine the size of the backup and estimate the total amount of time
to perform the backup. The backup size, time estimation, source and backup locations
are all displayed.
b. If you choose to change the “default” backup created, you can select Settings in the
BounceBack Control Center enabling you to customize your backup. Otherwise, you may
choose between starting the backup now or later.
CMS Support
10
Where is the documentation?
•The User’s Manual is integrated into the BounceBack Professional Control Center . To access the manual
open the Control Center and click on the Green Question Mark.
• If you would like to view the entire manual or print the manual, you will nd it on the BounceBack CD. It is a
pdf le entitled BB Pro V 7.0 User’s Manual.To get to the manual “Explore” the BounceBack CD.
What do I do if I need more help?
1 Access CMS online support at: www.cmsproducts.com/support
2 Call the CMS Customer Service Center: (714) 424-5520 for warranty issues
4 Call Technical Support (714) 424-5520 for assistance with BounceBack or help with a technical problem.
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels Cms Products Stockage
Manuels Stockage populaires d'autres marques
Spectra Logic
Spectra Logic T-Series Spectra T50e Manuel utilisateur
Panasonic
Panasonic LKM-F931-1 Manuel utilisateur
Tabernus
Tabernus Enterprise Erase E2400 Manuel utilisateur
Rocstor
Rocstor COMMANDER 3F series Manuel utilisateur
HP
HP P9000 Manuel utilisateur
Western Digital
Western Digital Ultrastar Data60 Manuel utilisateur