PC-66L Quick Guide
Mute Beeping Sound
6.
5. Alarm Set-up
Press and hold ”Mode/OK” for 2
seconds to go to the menu.
1.
• Short press the mute button to mute the beeping sound.
• Alarm sound will go off if measurement is out of limit or
sensor fell off. You can adjust the alarm thresholds based
on your need.
*Please be aware that the mute function would be
overwritten by alarm onset or power off. Short press the
mute button again if either situation occurs.
On the menu screen, select “Setting”
and then press “Mode/OK.”
2.
Menu
Setting
Upload data
Default
Español
Setting
Patient
SpO2Lo-Limit
PR Hi-Limit
PR Lo-Limit
ADU
90%
120
45
Use / to move cursor and select type
of threshold for alarm. Example shows
SpO2Lo-limit.
3.
Once confirmed, press “Mode/OK”
to save change and (power/back) to
exit from alarm setting.
5.
Setting
Patient
SpO2Lo-Limit
PR Hi-Limit
PR Lo-Limit
ADU
88%
120
45
Press ‘Mode/OK” to change default
value. A highlight will shows on the
screen, and use /to adjust to desired
threshold value. (see pg.13 in user
manual for more details).
4.
