www.club-3d.com
CSV-3103D MANUAL
USB 3.0 4K Docking Station
Multi-monitor configuration
The DP, HDMI and DVI monitors can be connected through the Docking Station if monitors are
already connected to the PC. Once extra monitors are
connected, it can be configured to use either “mirror mode”, “extended mode” or be the primary
display. NOTE: The DP and HDMI connectors can only be used one
at a time. Slide the lid in front of the two connectors to uncover the connector you want to use and
connect it to the monitor.
Windows® 7/ Windows® 8/ Windows® 8.1
Position the mouse anywhere on the Windows Desktop, Right-click and select Screen Resolution.
Alternatively, click the utility icon in the Windows System Tray, and then select DisplayLink
Manager or Video Setup.
Extended mode
1. Refer to the Windows system configuration section to open the configuration page.
2. In the Display drop-down menu, select the preferred monitor.
3. Check the Multiple Displays > Extend these displays on Window® 7/ Window® 8/ Window® 8.1.
4. Click OK to confirm and close the settings screen.
5. Once the setting is completed, simply drag and drop the application icons or the opened
windows to the add-on monitor. However, some applications may not support to display on the
extended desktop.
Cursor disappeared
If the status remains in the extended mode but the adapter is disconnected, the desktop will still
be panned to the add-on monitor. The cursor may not be found on the primary monitor in such a
case. If it happens, connect the add-on monitor through the adapter again or keep moving the
mouse.
Video playback in extended mode
If the video or DVD playback quality is poor or low performance in extended mode, please playback
it on the primary monitor instead of the add-on monitor.
Mirror mode
1. Refer to the Windows system configuration section to open the configuration page.
2. In the Display drop-down menu, select the preferred monitor.
3. Check the Multiple Displays > Duplicate these displays on Window® 7/ Window® 8/ Window® 8.1.
4. Click OK to confirm and close the settings screen.
