Cloudinary 56402 Manuel utilisateur

123456789012345678901234567890121234567890123456789012345678901212345678901234

56402

Genius Stand

Assembly Instructions

AScrew M6X8mm 4 EA

A1 ScrewM8X40mm 4 EA

BKnob 2 EA

CThreaded Square Washer 2 EA

DCaster Wrench 1 EA

E5” Locking Caster 2 EA

F5” Caster 2 EA

GAllen Wrench 1 EA

P1 LeftLeg 1 EA

P2 RightLeg 1 EA

P3 Lower Cross Brace 1 EA

P4 Stability Panel 1 EA

P5 Short Bracket 2 EA

P6 Long Bracket 2 EA

Part Drawing Description Qty Part Drawing Description Qty

Hardware List

Do not use unless all screws are tight. At least every six months, check all screws to be sure

they are tight. If parts are missing, broken, damaged, or worn, stop use of the product

until repairs are made by your dealer using factory authorized parts.

Assembly Diagram

IdentifyandSeparateallthePartsandHardware.

1.)

EAD

HROUGH

NSTRUCTIONS

FROM

BEGINNING

END

BEFORE

STARTING

ASSEMBLE

UNIT

Illustration # 2

Illustration # 1

2.)

3.)

Attach Left and Right Legs (P1 & P2) to the Lower Cross Brace (P3) using 4 screws (A1) as shown

inillustration#1. Fingertightenonlyatthis point.

DeterminetheheightyouwanttheStabilityPanel(P4)soitwillwork with your size board.

Attach the Stability Panel (P4) to the Left and Right Legs (P1 & P2) using 4 screws (A) as

showninillustration#2. TightenallScrewswithAllenWrench(G).

Small Board Location

Large Board Location

4.)

EIllustration # 3

P2P1

5.)

Illustration # 4

Illustration # 5

Attach 2 Locking Casters (E) and 2 Casters (F) to the bottom of the Left Leg (P1) &

RightLeg(P2)asshown in illustration #3. TightenallcasterswithCasterWrench(D).

6.) YourGeniusStandisshippedwithtwo Long

Brackets(P6)installedatthetop. Youmayneed

tochange these brackets and use twoShort

Brackets(P5)ifyourboardisthinner.

Seeillustration#5.

PlaceaThreadedSquare Washer(C)ontopof a Long Bracket(P6) andinsert both into one of

thebracketholdersat the bottom of the Stability Panel(P4). Secure the two using one

Knob(B)asshown in illustration #4. Repeat this Stepforthe other side.

26” 36”

68 1/2”

To 84 3/4”

32 1/4”

5” Casters

30 1/2”

2 5/8”

TO 5”

Note:

1/2”To

4 1/4”

See

Note

56402

Genius Stand

56402_04-25-14

YourGeniusStandis

shippedwithtwoLong

Brackets(P6)installed

atthetop. You may need

toswitchtheLong

Brackets(P6)out and use

twoShort Brackets (P5)if

yourboardisthinner.

30” to 46 1/4”

inHighSetting

45 1/4” to 61 1/2”

inLow Setting

Table des matières

Autres manuels Cloudinary Support et étagère

Cloudinary

Cloudinary WSP 420 Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur