HOW TO USE HOWTOUSE
A. General operation: (for general users.)
1. Insert batteries correctly. Batteries could be 2 AA rechargeable
NiMH batteries 1 .2 V (1600 mAh or above is recommended), or 2
AA Alkaline batteries 1 .5 V. Do not mix batteries to use.
2. Turn on the device by pressing
greenly.
3. If you wan to play 4 file under a selected
language folder, simply press POWER ON
© (a) and press numeric 4 after indicator
lights greenly then press PLAY/STOP© c
The indicator O 6} will glitter greenly while
playing selected file. When play is finished,
the indicator will become green and keep on
4. If you wan to PAUSE the play of 4th file
simply press numeric 0 (n ;cj;), the indicator
will glitter slowly.
5. Press numeric 0 (II (rjp) or PLAY/STOP ©
Cc
to keep on playing. The file stars to play
from
where just paused and the indicator will
glitter
fast.)
6. Adjust the volume level by pressing numeric 9 (up) VOL+ Cf) or
numeric 7 (down) VOL- <je). Totally 10 levels are available. Every
press on numeric 9 VOL+-' f). or numeric 7 VOL- e) will get a
respective volume up or down. Factory preset of volume is fixed at
6th level.
I
7. Volume adjustment (numeric 9 & 7) can't be in function when
PAUSE or STOP playing the file.
8. When the file is on play, press PLAY/STOP © (c) to stop. When a
file is on play, must press PLAY/STOP © before entering a desired
file number.
9. AT-100 will turn off (LED O <&, off) automatically when there isn't
any action made to the unit under standby mode for certain of
period, (please refer to ATC-110U user manual for further setup.)
B. Advanced operation: (for system maintainers or service providers)
1. Please change batteries (Alkaline) or put AG-100 onto compatible
charger (ATC-110/ATC-110U) when pressing POWER ON © ®
and the LED indicator O :b shows red.
2. Change language folder: Totally 32 language folders are available,
number code given from 951 to 982.
3. How to change to desired language folder: Enter desired language
folder code under standby mode (LED indicator lights greenly); and
press PLAY/STOP © © to implement. For example, if language
folder code 951 is the desired one to change from current language
folder, simply enter numeric 9, 5, 1 and press PLAY/STOP © ;c
to implement under standby mode. The indicator will glitter twice at
the same time, and it means this change is successful.
4. How to update data: Please refer to Audio Guide Updater
ATC-110U for more information.
