Clint F3 Manuel utilisateur
User Manual
Brugervejledning
Bedienungsanleitung
F3
CONTENTS
Introducon/Glossary
Safety instrucons
Care and maintenance
Controls/Funcons/General Operaon
DAB+ Operaon
FM Operaon
Troubleshoong /Specificaons /Help and support
Page 3
Page 4
Page 5
Page 6-7
Page 8
Page 15
Page 20-21
2www.clintdigital.com
English
F3 Instrucon manual
Congratulaons on purchasing the Clint® F3.
We trust that this product will give you hours of listening pleasure,
and provide years of unparalleled performance. As with any new
electrical product please be paent and allow 36 hours of use
before all components have acclimazed themselves with your
surroundings and found their opmum working temperature.
Introducon
DAB Digital Audio Broadcasng
RDS Radio Data System
UI User Interface
DLS Dynamic Label Segment
SNR Signal to Noise Rao
GLOSSARY
3
www.clintdigital.com
English
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE ANY COVER. NO USER-SERVICEABLE PARTS INSIDE,
REFER ANY SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS
• Read and keep these instrucons available for future reference.
• For indoor use only
• The unit must only be connected by using the mains power adapter
provided.
• To reduce the risk of fire or electrical shock, do not expose this unit
to rain or moisture.
• The apparatus should not be exposed to dripping or splashing.
• No objects filled with liquids, such as vases, shall be placed on the
apparatus.
• Take care that foreign objects do not enter, or liquids are not spilled,
into the case through any openings. If this should happen, refer to
qualified service personnel before aempng to use.
• Do not install near any heat source, such as radiators, or other
equipment that produces heat.
WARNING: The baery (baery or baeries or baery pack) shall not
be exposed to excessive heat such as sunshine, fire or the like.
Excessive sound pressure from earphones and headphones can cause
hearing loss.
NOTE: This unit is designed to enter STANDBY mode automacally
aer 20 minutes (approximately) of inacvity. Press the SLEEP /
buon to wake the unit.
4www.clintdigital.com
English
“Informaon for the consumer”
Disposal of your old product
Your product is designed and manufactured with high quality materials and
components, which can be recycled and reused.
When this crossed out wheeled bin symbol is aached to a product it means
the product is covered by the European Direcve 2002/96/EC.
Please make yourself aware of the local collecon system for electrical and
electronic products.
Please act according to your local rules and do not dispose of your old
products with your normal household waste. The correct disposal of your
old product will help prevent potenal negave consequences for the
environment and human health.
This product complies with European low voltage (73/23/EEC) and
electromagnec compability (89/336/EEC) direcves.
WEEE marking
5
www.clintdigital.com
English
CARE AND MAINTENANCE
To clean the F3 radio, wipe the case with a slightly moist, lint-free cloth.
Do not use any cleaning fluids containing alcohol, ammonia or abrasives.
Do not spray an aerosol at or near the radio. Always use original
packaging if it is necessary to transport the unit at any me. If this unit
is used in a dusty environment, it may be necessary to have the unit
serviced at your local dealer periodically. It is not advisable to allow
large deposits of dust to accumulate within the unit as it may prevent
adequate cooling. Similarly dust deposits which become damp can
somemes lead to electrical problems which may cause severe damage
to the delicate electronics within this unit.
CONTROLS AND FUNCTIONS
1. LCD display
2. DAB/FM buon
3. INFO/MENU buon
4. BACK/SCAN
5. ENTER buon
6. / �buons
7. Volume +/- controls
8. 1/6 Preset buon
9. 4/9 Preset buon
10. 2/7 Preset buon
11. 5/10 Preset buon
12. 3/8 Preset buon
13. Preset buon
14. Sleep / buon
15. POWER switch
16. DC power input
17. EARPHONE output
18. Baery compartment
151617 18
1 2
3 5 9 1113
4 67 81012 14
6www.clintdigital.com
English
GENERAL OPERATION
1a Mains Adaptor (supplied with the package)
Connect the mains adaptor to the DC power socket on the rear of the
radio.
1b Baery (not supplied)
Open the baery door and insert 6 x “AA” size baeries.
NOTE: Insert baeries correctly. Pay aenon to the +/- polaries
When le unused for long period of me using baery power, it is
advised to switch the power to the OFF posion to avoid baery
drainage in STANDBY mode.
2. Extend the telescopic aerial as far as it can go.
3. Slide the Power ON/OFF switch to ON to turn on the radio.
The radio will automacally tune and operate the quick scan.
During scan mode, the LCD will display a slide bar that indicates the
progress of the scan, and the amount of radio staons that have been
found so far. Once the scan has finished, the radio will select the first
alphanumeric staon.
NOTE: The name of the found group of DAB+ radio staons will be
displayed on the boom half of the display.
Switching on your radio for the first me
7
www.clintdigital.com
English
When you power up the radio again, the radio plays the same mode
(DAB or FM) as the last operaon.
If you hear no sound, then press the “VOL +” control unl you reach a
desired level. If the volume is too high, then press the “VOL -” control
to decrease the volume level.
To listen the staons that have been stored press either / buons
to cycle through. Each me you press the / buons you will skip
to the next or previous stored staon. The radio will switch to display
the staon name.
Press the “SLEEP/ ” buon for 2 seconds to turn off the radio
whenever it is on.
Memory
DAB+ OPERATION
1 Storing staons
it is possible to store up to 10 of your favorite staons to the preset
keys. This will enable you to access your favorite staons quickly &
easily.
To store a preset, you must first be listening to the staon that you
would like to save, press & hold the PRESET buon for 2 seconds.
The LCD will then show the following.
8www.clintdigital.com
English
2 Recalling a stored staon
Once you have saved a staon to one of the preset buons, you can
recall by pressing the PRESET buon. Then use the / buons to
select the desired preset staon. Once selected press the ENTER
buon to acvate.
If you choose a preset that has not been allocated a staon, then
“Preset Empty” will be displayed.
Alternavely you can use the preset buons, press one of the buons
to use the first digit preset ie:- 1-6 will be 1. To use the preset 6 press
and hold the 1-6 buon.
3 Display modes
Every me you press the “INFO/MENU” buon, the display will cycle
through the following display modes: The informaon is displayed on
the lower segment of the LCD display.
DLS (scrolling text)
Signal Strength
Programme Type
Ensemble Name
Channel Frequency
Signal Error
Bitrate
Time
Date
9
www.clintdigital.com
English
Use the / buons to choose the preset number from 1-10 you
wish to use. Then press the ENTER buon to store.
4 DLS (Dynamic Label Segment)
Dynamic label segment is a scrolling message that the broadcaster
may include with their transmissions. This message usually includes
informaon, such as program detail etc.
5 Program type
This describes the “Style” or “genre” of music that is being broadcast
e.g. “Rock“ or “Classical”.
6 Ensemble/Mulplex (Group name)
A mulplex/ensemble is a collecon of radio staons that are bundled
and transmied on one frequency. There are naonal and local
mulplexes. Local ones contain.
NOTE: DAB – unlike normal radio, groups together several radio
staons and transmits them on one frequency.
7 Time & Date
The me & date can be set automacally from the DAB broadcast or
set manually.
1. Press and hold the INFO/MENU buon for 3 seconds.
2. When the <Autoscan> opon appears press either or and find
<System>.
3. Press the ENTER buon, use the / to find <Time> and press
ENTER.
Inside the <Time> menu there are several opons. <Set 12/24 Hour>,
<Set Time/Date> & <Auto Update>, <Set Date Format>.
10 www.clintdigital.com
English
Table des matières
Langues :
Autres manuels Clint Radio
Clint
Clint BT-H1503 Manuel utilisateur
Clint
Clint P1DAB-Y Manuel utilisateur
Clint
Clint L1 Manuel utilisateur
Clint
Clint CAD15 Manuel utilisateur
Clint
Clint L1 Manuel utilisateur
Clint
Clint F7 Manuel utilisateur
Clint
Clint F6DAB-B Manuel utilisateur
Clint
Clint L1 Manuel utilisateur
Clint
Clint F4 Manuel utilisateur
