Clevertronics Argonaut Square ARGOSQ Series Instructions d'installation et d'utilisation

1942488

V1.0

2nd August 2021

Instruction Sheet Template - V1.1 –Updated 23/11/2020

THIS PAGE IS INTENTIONALLY LEFT BLANK

240V Argonaut Square LED Emergency Light

Installation & Maintenance Instruction Leaflet

Victoria (Head Office & Manufacturing)

Website: www.clevertronics.com.au

Email: info@clevertronics.com.au

Phone: +61 3 9559 2700

Fax: +61 3 9559 2799

New South Wales

Phone: +61 2 8805 6400

Fax: +61 2 8805 6444

Queensland

Phone: +61 7 3442 9700

Fax: +61 7 3442 9777

South Australia/Northern Territory

Phone: +61 8 8301 8800

Fax: +61 8 8351 8286

Western Australia

Phone: +61 8 9207 0000

Fax: +61 8 9207 0088

New Zealand

Phone: +64 800 548 448

UK OFFICE

Website: www.clevertronics.co.uk

362 Stockley Close

West Drayton UB7 9BL

Phone: 01895 430 255

Models:

ARGOSQ-yy

Options:

Microwave Sensor Hi/Lo Control

yy = SEN

Black Body

vv = BLK

Spare Parts:

8050785

LED Panel + Clips

1330094

1330094 LED Driver - 40w Stallion, SP2, 470/270mA

1330095

LED Driver - 40w Stallion, MS-HL2, 470mA (for yy = SEN)

Important:

It is illegal for anyone, except for a licensed electrician to install or maintain this product. Before installation,

ensure that the electricity supply has been switched off and isolated. Installation must be carried out in

accordance with the relevant Building and Electrical Standards.

1942488

V1.0

2nd August 2021

Instruction Sheet Template - V1.1 –Updated 23/11/2020

Installation:

The Argonaut Square can be installed either Ceiling or Wall Mounted.

•Remove the four (4) screws holding the diffuser to the base.

•Remove the four (4) screws holding the gear tray to the base.

•Determine the cable access point. There are 2 locations on opposite sides of the fitting for cable

gland/conduit entry. Entry can also be from the back of the base. Drill out the desired cable entry

point.

Note: Only round cables are to be used with the cable gland for an IP65 seal. Keep cable

entry straight and tension free. Ensure all seals are tight.

min. wire diameter 7mm, max. 12mm.

•Drill out 4 of the mounting points in the base (see image below).

•Using the base as a guide, mark the 4 holes for mounting and one for mains access if using back

cable entry.

•Mount the base using appropriate fixings and seal these fixings with appropriate sealant (fill any

additional entry points with same sealant also).

•Route the power inside the base.

•Connect the 240VAC (L,E,N) supply to the terminal block of the gear tray.

•Install the gear tray to the base.

•Apply power to the fitting and test per the instructions.

•

NOTE:

This luminaire (with reinforced insulation between control/LED terminal and AC Supply) contains non-

user replaceable light source –to be replaced (if required) by the manufacturer or his service agent or a

similar qualified person.

Dimensions:

Driver Setting:

For non -SEN / -DD products

Trouble Shooting:

Below are a list of common problems and their possible causes.

Fault: The LED Strip is not illuminated.

Check: A.C. is connected and is turned on.

Wiring connections between the LED Driver & LED Strips

Autres manuels Clevertronics Lanterne

Clevertronics

Clevertronics Supalite L10 LWFLED Series Caractéristiques techniques

Clevertronics

Clevertronics L10 LWP2LIFE-PRO-WPPOD Series Instructions d'installation et d'utilisation

Clevertronics

Clevertronics LP CBS2N Series Caractéristiques techniques

Clevertronics

Clevertronics L10 LIFELIGHT PRO LLIFE-PRO-SMC Series Instructions d'installation et d'utilisation

Clevertronics

Clevertronics LP Supalite CFLLED Series Instructions d'installation et d'utilisation

Clevertronics

Clevertronics LP Supalite CFLLED Series Instructions d'installation et d'utilisation

Clevertronics

Clevertronics ARGO-600 EM Series Instructions d'installation et d'utilisation

Clevertronics

Clevertronics Argonaut PRO ARGOPRO-1200 Series Instructions d'installation et d'utilisation

Clevertronics

Clevertronics CLP LIFELIGHT CLIFE Series Guide de maintenance et de service

Clevertronics

Clevertronics L10 LIFELIGHT PRO LLIFE-PRO-SMC Series Instructions d'installation et d'utilisation

Clevertronics

Clevertronics ARGO-1500-EM Series Instructions d'installation et d'utilisation

Clevertronics

Clevertronics L10 LIFELIGHT PRO Manuel

Clevertronics

Clevertronics L10 LWFLED Guide de maintenance et de service

Clevertronics

Clevertronics L10 LIFELIGHT PRO-SM Series Manuel utilisateur

Clevertronics

Clevertronics L10 Supalite LWFLED Series Mode d’emploi

Manuels Lanterne populaires d'autres marques

KYOWA

KYOWA KW-9114 Manuel utilisateur

Stahl

Stahl ECOLUX 6610 Series Manuel utilisateur

SNOWJOE

SNOWJOE SUNJOE 24V-LGT500-CT Manuel utilisateur

PRG

PRG VARI LITE VL5 Manuel utilisateur

Raytec

Raytec VARIO2 series Manuel utilisateur

ENSA

ENSA LEDBT18WS2 Manuel utilisateur

LUG

LUG OFFICE LB LED N/T Manuel utilisateur

GE Wallighter 250 Manuel utilisateur

Draper

Draper RLEDL19/B Manuel utilisateur

Green Lighting

Green Lighting TRI-SENSOR GL4612LU Manuel utilisateur

Panasonic

Panasonic EY3741B57 Manuel utilisateur

Clas Ohlson

Clas Ohlson LCC8T Manuel utilisateur

Coolon

Coolon WDN-140 Manuel utilisateur

Holiday Travel

Holiday Travel 834873 Manuel utilisateur

BEGA

BEGA 84 036 Manuel utilisateur

BEGA

BEGA 33 596 Manuel utilisateur

Dale Tiffany

Dale Tiffany GT701162 Manuel utilisateur

Wagan

Wagan Brite Nite Pop-Up USB Lantern Manuel utilisateur